Solved

Good day everyone: I take the chance to pose a question: I have to help a customer in setting up the multi cluster tool in an environment where we are finishing installing the K10 instances on 6 OSCP clusters in Operator mode. The version installed by operator is 6.5.4Official doc is here https://docs.kasten.io/6.5.4/multicluster/tutorials/getting_started.html#and I was searching for a post like a more detailed “graphical” guide to support my customer at bestThank you in advance

What different between this community with the forum (https://forums.veeam.com/)

Hello,We are planning to upgrade veeam from V11.0.x to 12.1.x, but on current installation (V11) we have configured Linux repository with immutable settings. But in V12 we see that there is Linux - (no immutable settings) and Linux as Hardened Repository i(or something like that with immutable settings) . Question, do we lose immutable settings after migration and there will be need to create new repo with immutable settings ?? Thanks,    

Actually, the IBM tape library is physically connected to Veeam backup server in our environment, but when i configure tape library through Veeam server console, what i enter the server details means IP or hostname.because Veeam backup server and tape library IP is different, so what should be enter for tape library configuration.i did the backup server IP then drive is not reflected in Veeam console, but i checked computer management the tape drive is available on device manager. what is the issue, please suggest.

A customer wants to set up a Veeam cdp job for a critical vm on a vSAN cluster v8. The source and destination cluster is the same. Is this possible? does it make sense?

Hello,I have added to veeam IBM FlashSystem as Spectrum Virtualize, and there is used superuser accout(most powerfull account on FlashSystem) for access. Question, does sombody know if possible to create least privilade account on FlashSystem ??? If yes, which role this account should have Thanks

hello,I have two instance of Veeam with Hardened repository. On each there is one Job and this contain all VMs from specyfic vCenter.But on one instance of veeam i have one VIB file per day contining all VMs and on second instance I have one VIB per VM per day. Is it configurable somehow on second instacne to also have one VIB file per day for all VMs??  Thanks,

buongiorno, con un cliente che ha un File Backup Job con un target secondariohttps://helpcenter.veeam.com/docs/backup/vsphere/file_share_backup_job_secondary_target.html?ver=120quando lancia il job compare una domanda “vuoi lanciare anche i job concatenati?” Che si risponda sì o no, parte comunque nello stesso momento anche il job di copia, che si chiama “nomejob (copy)”.Questo job di copia fallisce dicendo che i file sono locked dal job principale.Come si può ovviare a questo? E’ normale? Sbagliamo qualcosa?

Customer's tape needs to be erased, prompt  Error  Unable to perform Tape erase for library IBM 3573-TL E.70: cannot lock tape drive。I don't know how to operate it

Hi guys,I have a problem when searching for information in jobs type "EpAgentBackup", in the "Backup" type I can search for all the information, but in "EpAgentBackup" I can't... I would like information like the following:                Job                          = $JobName                Name                      = $jobObject.Name                Size                         = $jobObject.ApproxSizeString                PointsOnDisk            = $PointsOnDisk                LastResult                = $LastResult                LastBackupStart        = $LastBackupStart                LastBackupTotalSize  = $BackupTotalSize                LastBackupSize         = $BackupSize                RepositoryPath         = $RepositoryPath                Status                     = $jobStatus Today I can't search for information via PowerShell in Agent type jobs.Could someone please tell me if it is possible?Thank you for all your support!Thanks in advance 

We tried to  restore ( entire computer ) one of our production computer due to slowness. we tried multiple full backups from different dates. But all restored Hard disk ( New ) having some booting issue.Automatically go to automatic repair mode and failed Cant boot into safe mode Went through the startup chkdsk - failed** Noticed a warning as shown on the image during restore process . does it related to this booting issue ? 

Hi All, I need a Veeam powershell command to fetch agent based backup. I am using below command to fetch last night backup status but it doesn’t include agent based backup. Get-VBRBackupSession | Where-Object {$_.JobType -eq "Backup" -and $_.EndTime -ge (Get-Date).addhours(-24)} Do you know single command to fetch all types of backup or different command for agent based backup? Thanks in advance

Actually, we logged the case to Veaam support team for some issue. they analyzed upgrade the Veaam server version from 12.1.1.56 to 12.1.2.172 and we are getting notification for upgrade the version on Veaam console. As per my understand, can we do through below steps ?first completed all jobs then disable all job take a configuration backup to another location. then start upgradation from Veaam console.is it right process or can we upgrade from new latest version install on same server ?Please suggest.

Hello,We are using self-service portal for our backups and we've discovered different size for each backup job. For example backup job on portal is showing 747,1GB of given backup but vbk file showing 855GB. what is the reason of this differences?thanks,Ladislav.

I have an Netapp A900. Volumes have a lot of shares in them. Adding shares individually would be tedious. So the question is, can I add the entire volume to a NAS job and then Veeam will protect all shares within the volume ?

I have a tape library with 4 drives. Veeam seems to be only using 2 of them. For example, right now I see all 4 drives - 1 is writing to 1 tape job, a 2nd is writing to another tape job, the other 2 drives are sitting, showing “idle”. Yet I have 5 more tape backup jobs sitting in queue, all showing status “0% completed”. Why isn’t Veeam writing some of those jobs to those 2 idle drives? I do have a setting on each tape job to limit it to no more than 2 drives, because I don’t want any 1 job to monopolize all tape drives. But Veeam seems to think that means to use only 2 drives *total*, not per-job. Have I missed some setting? Or set something wrong? I have a lot of data to write to tape every night, and more to come. In fact, I am waiting on 2 more tape drives, for a total of 6. But Veeam isn’t utilizing all the drives in the library. I did ask Tech Support, while I was troubleshooting another tape issue, but I never got a response to this question.Anyone? I feel it has to be something

Tape issues, Hey guys, I have been round and round with support and we are not getting far I have 28 tapes in my tape library and VEEAM sees them and reads them, but they are only showing 107gb free of 107gb total storage.  These are 30tb LTO8 drives and the systems UI itself shows the drives are 100% clear thoughts on what else I could try? I have done everything using the itdt.exe tool and still no luck    Thanks in advance

Hi Everyone,  I have a notification of potential malware detection on one of my VM with the message "potential malware activity detected: *.purge(Globe):1”  Does anyone know how to resolve this ?

Cloud team has done final sync-up of the source and destination bucket , so we disabled the backup job , created one object storage repository with the new aws account and then added to the capacity tier extent of existing SOBR , but we are unable to see the synchronize data option , please help

Can someone help me with info on how Veeam processes parallel VMDK’s? Does it uses VDDK Libraries or bypasses VDDK and uses its own libraries?  I have seen few backup solutions still struggling to achieve this parallel processing.  

a)I have a VBR 12 running on Postgre DBb)I am setting up another VBR and this time I dont want to use the default Postgre DB.Hence I an selecting Miceosoft SQL Server but its asking me to create the SQL Instance first. Am I supposed to install SQL Full Blown Instance or SQL Express Instance?  

Hello, Thanks, I cannot install latest VBRso this is what happened.For years, at VBR 11 installed and worked great. thanks veeam! Now, tried to update to latest 12.1. i downloaded .iso and checked md5 hash. That update failed, complained could not uninstall veeam for linux. I tried again to update and this time, instead of being asked to upgrade, i was only given option to Install. I tried to install, but VBR complains about seen belowSo I tried to manually remove VBR using:https://forums.veeam.com/veeam-backup-replication-f2/how-to-uninstall-v12-community-edition-completely-t89675.htmlhttps://forums.veeam.com/veeam-backup-replication-f2/how-to-uninstall-v12-community-edition-completely-t89675.html But, when i try to install, I still get that same error message, as shown above.here is the contents of VbrSuite_26_05_2024_10_32_34.log[26.05.2024 10:32:34][INFO] Configuration file: G:\Setup\VBRSettings.xml[26.05.2024 10:32:34][INFO] Engine is starting...[26.05.2024 10:32:34][INFO] Creatin

We have Veeam Data platform enterprise plus premium license and need to install license file on physical laptop client. but no luck. we tried to install same license file on physical laptop. but no luck.Please suggest.

Hey all,I have installed veeam backup in GCP and in the policies I have created, both the snapshot and the backup are working (attached images).now i would like to clone this backup that veeam has generated, in a new instance of GCP, but i don't see how to do it.the idea is not to use the veeam windows backup (VBR) or another system, but to do it from GCP.take the structure that veeam has created when leaving the backup and restore or clone the machine in GCP.I don't see the option to do it. maybe it is not possible. someone help me to clarify this issue.I have consulted articles like the ones below, but they do not help me:If it is not possible to do it as I indicate, and I have to use VBR as a prerequisite, what is the point.I mean, is it essential to use it? is it mandatory to have VBR installed and there is no other way?Thanks in advance.   

Hi all… greetings…I am wondering if expiry date can be shown in the Veeam GUI under backup properties?With using Dell DataDomain immutable repo