Solved

This is going to be my first time setting up Veeam ONE (Enterprise Manager?). Where is some good documentation on the product as far as functionality goes. Also, what are some, if any, best practices for setting it up? Should I run it in directly on the VBR server or spin up it’s own VM? Anything will help at this point.  Thanks in advance!

Hi,i have a customer where he has application “redis” who is controlled by redis-controller, the redis namespace have 3 deployments, and the csi driver does not support the volume snapshot so we go with generic backup.only one of the deployments get injected by kanister sidecar, and the remaining two did not, after troubleshooting we saw that the 2 deployments didnt accept the annotation:”k10.kasten.io/forcegenericbackup”, and it will be removed automatically after a few seconds.is there any possible way to inject kanister inside these deployments without adding this annotation?

Hello,We have a user who has left the company, and their last backup on VBM365 is from 25/01. The issue is that we don't have any restore points, even though we have a retention policy of 7 years.What do you think could be the problem?Thank you.

I am trying to upgrade 11a (11.0.1.1261_22020302) to V12.1 via iso and when it gets to step 3 (Upgrading Veeam Explorers) a popup says that it can't find VeeamExplorerForSQL.msi_explorers.  Error: The feature you are trying to use is on a network resource that is unavailable.It is looking for that file in this location (which does not exist):C:\ProgramData\Veeam\Setup\Temp\80ca74a8-4c01-451b-b8df-3d76e7abf376\FixFiles\I can't find it anywhere on the machine.  I did find an old log file that references that file that references version 9.5.  I found that file inside an old 9.5 update.  I extracted it and put it in the location asked for, but it still does not like it. 

Hi there in Virtual World :)Running Veeam 11 - We experienced a complete full “Files to Tape” backup when the daily Tape job ran for the first time after entering Daylight Saving Time (DST) last weekend.ALL files in our backup Disk repository (xx TB) - that means UNCHANGED Veeam backup files from the last 4 months - was all sent to Tape once again - taking several job-runtime days to finish - and filling up a lot of new Tapes, which we needed to supply into the Tape library.Have anybody else experienced similar issues?As far as I have read  - Veeam operates in the UCT format - which should not be sensitive due Server time changes or DST - except changes in the local job time schedule:Daylight savings time - Veeam R&D ForumsDaylight saving switch changes job start time - Veeam R&D Forums We didn`t have any other issues running the usual VM Machine jobs to disk.This issue has been raised to the Veeam Support - and it has been escalated to their RnD engineers.So hopefully they wil

Moin,besteht die Möglichkeit bei dem Enterprise Manager einen Cloud Connect B&R und einen normalen B&R hinzuzufügen, denn ich habe immer das Problem das er die Lizenz von den EPM nutzt. Dadurch kann ich entweder die Cloud Connect Lizenz oder die B&R Lizenz einspielen und mir werden dadurch die Funktionen gesperrt. Danke

Hello guys,I m trying to used the Secure Restore with Sophos Endpoint Agent.Is not an antivirus implemented by default in the configuration files. So I tried to edit the AntivirusInfos.xml but for the moment I got the following error message :Here the part added:<AntivirusInfo Name='SOPHOS Endpoint Agent' IsPortableSoftware='false' ExecutableFilePath='%ProgramFiles%\Sophos\Endpoint Defense\SophosInterceptXCLI.exe' CommandLineParameters= 'scan %Path%' RegPath='' ServiceName='' ThreatExistsRegEx='' IsParallelScanAvailable='false'>        <ExitCodes>            <ExitCode Type='Success' Description='Command executed successfully'>0</ExitCode>            <ExitCode Type='Error' Description='Error during command handling'>1</ExitCode>            <ExitCode Type='Error' Description='Unexpected error during CLI setup'>2</ExitCode>        </ExitCodes>    </AntivirusInfo>Does anyone have already implement Sophos Endpoint Agent with Veeam

This is probably a relatively complicated one, but also not a critical issue for us as there’s sufficient workarounds. Not something I want to go through the trouble of a support ticket with at this time. Hoping a community member can make the seemingly complicated uncomplicated. Veeam 12.1. We have a number of systems in our environment that we use the Veeam Agent for Windows to back up. We are primarily on Nutanix AHV for our virtualization. The backups seem to work just fine. When doing some recent restore testing, we noticed something. The goal of the restore testing was to test restoring these agent backups to our Nutanix AHV cluster. When using “Restore entire VM to Nutanix AHV...” option, during the wizard when I get to the storage container page, it shows the computer, but with no disks. What I then found was that this “no disk” symptom also occurs if I use the “Instant Recovery to Nutanix AHV”, but it actually gives an error message of “The following machines have no disks, us

Hi Everyone,I am wondering if there is a license for Veeam ONE only (not VUL for Data Platform Advanced) as this license can be used to monitor the Virtual Infrastructure workloads that are not protected by VBR as the VUL is for 10 instances which is covered the backup instances and VONE monitoring for them but what I want to achieve is monitoring the others in the virtual environment, is that possible ? as I read in Veeam Licenses documents but still confused.Appreciate your cooperation

We have configured tape server and rescan, and inventory completed. but insert new tape in tape library and rescan and inventory done but doesn’t show of capacity or media in media pool?while creating media pool, does not appear anyone media? is there any requirement or any process? please guide. already go through following link but not work.https://helpcenter.veeam.com/docs/backup/vsphere/backup_to_tape_hiw.html?ver=120 help us

dears,we have an env where there 2 CSI drivers, ebs-aws that support volumesnapshot, and efs that does not.all pods and data are stored on ebs-aws, the pods on ebs generates a continuous logs and all are stored on EFS and saved as files. the question is, when we run the backup for the applications on ebs, the logs stored on EFS will be backed up and all are protected? or there is additional tasks to do?

I posted the below on Reddit, let me know your thoughts...We're in talks at work to make a new GFS repo where we keep X daily Y weekly Z monthly and maybe a single yearly on the Veeam repository and also take a copy monthly/yearly from said repo to tape and then off to the safe deposit box at the bank. What if I lose my repo and all that data. Yeah, I might have a few monthly/yearly at the bank, but I'm hosed on the daily/weekly side. All that history, lost. Is anyone have a redundancy approach they're using? We're thinking about using a couple Synology boxes in in HA mode basically where they basically stay in sync with each other. Let me know what you think. I also think we could use a second Synology box do do backup copy jobs and keep the same GFS retention points there...

I am trying to backup a physical server with a 81.7TB volume using B&R version 12.1.1.56 and Veeam VSS Hardware Provider version 6.1.0.349.  I have deployed the Veeam agent in managed mode and created a Backup Proxy of the physical server which installed the Veeam Backup VSS Integration and Veeam VSS Hardware Provider.  According to Veeam a volume greater than 64TB can be backed up using the Veeam VSS Hardware Provider.  I don’t know how to reconfigure the managed physical server and/or backup job of the server in the Veeam Backup and Replication Console to use the Veeam VSS Hardware Provider.  I do not have any option to Manage Volumes on my ribbon under this managed server as the Veeam instructions dictate.  I have run a Rescan on my managed server which successfully completes finding all disks and volumes but still no option to Manage Volumes on my ribbon.  How can I ensure my managed server and backup job are properly using the Veeam VSS Hardware Provider?  Everything else is w

Hello Guys,So i had a Hyper V server that was joined to the domain, and it was succesfully onboarded to veeam.Now it was removed from the domain and built-in local admin was renamed from "Administrator to new_username"Now we cannot onboard the sever to Veeam using the local admin with the new renamed name.I have updated the serverI have added the admin account to other admin groups on the serverUpdated WindowsStill no successAny suggestions would be helpful.

Hello, I have made upgrade from Licences 9.5b to 11a Community Edition without any Problem, but by upgrading to Version 12 Community Edition it gives me this: “[Error] Private fixes detected. Please contact our Customer Support to remove the following private fixes that are not supported by the new product version: TFS000100”There is no thread about TFS000100. In Registry there are no “Private fixes” found. Any idea?

Error message: Flow:In my kasten backup, i tried to use blueprints to better prepare my elasticsearch db for backup.But, for some reason, my blueprint cannot render '.Profiles' value in official Blueprint for elastic The command is at the last line:Unfortunately, profile is presented and created on kasten dashboard cannot be reached out. More details on my profileSo, is there anything that can prevent those parameters (blueprint and profiles) to be connected?Note 1Also my profile cannot be reached out in kasten-io namespaces when i tried oc get profiles commandBut I see profiles with this command Any explanation on this?Note 2Pod of the blueprint will start in the different namespace than default kasten-io ( {{ .Statefulset.Namespace }} ). Is that a problem? At first that  was strange to me, but I did not find anything about it in documentation so i left it as default.Any explanation on whole problem or about minor doubts presented in notes would be great!Thank you in advance!

our company is the Veeam partner company, hence we deployed the veeam backup and replication software, in there having tape library issue, therefore I have raised the case, but i can’t connect to support team directly.so, please provide any contact number or else other way to connect technical support team ?

Hallo zusammen,  ich habe mich entschieden meinen Kunden zukünftig Backup als Managed Service anzubieten. Leider aber habe ich derzeit noch ein paar Verständnisfragen. Aber erst noch einmal zum Design bzw. gegenwärtigen zustand: Ich habe Kunden in einer Größenordnung zwischen 1 - 50 Mitarbeitern. Beinahe alle haben keine Virtualisierung oder Serverinfrastruktur. Bedeutet sie nutzen reine Cloudlösungen wie z.B. M365 und Lokal eben Speicherlösungen wie NAS oder SAN Systeme.  Eine meiner Fragen wäre jetzt, wie könnte man es handhaben Veeam Backup & Replication auszurollen als lokale instanz bei Kunden wenn kein Server vorhanden ist? Wäre auch eine installation auf einem produktiv Notebook denkbar, das ggf. nicht immer an wäre? Bei größeren Kunden bekomme ich bestimmt auch einen Server platziert aber bei einem 3-5 Personen Unternehmen wird das schwierig… Wie sieht es auf der Gegenseite mit der V Service Provider Console aus? Installiert ihr das lokal bei euch auf einem PC oder Server,

Hello guys, I’m trying to setup a new Veeam installation with a remote MS SQL 2022 server. I already did it in the past with another version of Veeam but this time I’m facing an issue.The Database server is in another VLAN, rules are ok on the firewall. On the DB server, I disabled for the moment the Windows Firewall.In the SQL Server Network Configuration I set TCP/IP like this: But during the Veeam installation I got the following error:My service account for the installation is local administrator of the Veeam Server and has sysadmin permission on the SQL Server.Any idea? 😄 I’m not an expert with MS SQL so I have maybe miss something.​​​​​​​

Just wondering if there is any official information on Veeam Update 12.1.2 out yet? What might be coming with it, improvements to SOSAPI? I have heard rumors but wanted to know if I had missed any official news.Thanks

Got a weird situation I’m not sure of the right approach.  This setup is new to me and has some issues which I fully acknowledge and will be seeking to rectify. I have a restore request to recover the server VM that Veeam B&R is installed on.  It’s a shared application server running on Hyper-V and one of the other applications has become corrupted and the system will have to be rolled back. My plan was to take a configuration backup of Veeam so I could recover Veeam to the current state after the server itself has been rolled back.  The repository is on separate storage so won’t be overwritten by the restore. What I can’t quite figure out is whether or not Veeam is going to be able to instigate a restoration of the machine the B&R server itself is actually running on.  Can it do that or will I have to install a second copy of Veeam on another server and import the backup before restoring it? 

I need to understand Veeam Backup Proxy servers better. I have two sites.  They are in different cities, but connected via a P2P, so on the same network.   Site one holds my Veeam Backup server, ESX hosts, VMs, primary storage, etc.   Site two contains one ESX server and a very few VMs, (one DC, file server, DHCP) and some storage. At site one, all of my backups are scheduled to run and store locally.  Then, from site one, backup copies are moved across the P2P to site 2 for "off-site" backup.  This works well.   The VMs at site 2 are set to backup to local storage at site 2, but the backup runs and was built from site 1. BUT, at site 2, I have a Veeam B&R server as well and it's listed as my proxy server.  It's not doing anything.  It handles no backups and basically just sits there. So, clearly, I don't understand WHAT a backup proxy is for or how to use it. Can someone explain it to me like I'm a three year old and maybe draw some pictures? Thanks

Hello, I was tasked to research for B&R solutions for our on-prem k8s product.We are using rook-ceph and we want mainly to be able to back up volume snapshots to somewhere external (let’s say S3 bucket) including their contents (not only the k8s resource).As part of the research, I saw that in Velero, in order to copy the volumeSnapshot contents, a pod needs to attach to a cloned PVC with root permissions and possible with ‘privilged: true’. As this is a security concern, I was wondering if in Kasten the situation is the same. I couldn’t find in the docs information about this.Regards,Itay

Greetings, all. I’m prepared to be labeled a “noob” here but I’ve been unable to locate any documentation on what this message actually means in plain language.I have a VM that I’d like to do a test restore on. Walking through the wizard everything makes sense (restore to a different location, disconnect network, etc.) until the final step.The following existing objects will be deleted from the infrastructure.What is this (to my thinking) unclear message trying to communicate? I do not wish for my VM, its virtual disks, or its backup history to be affected in any way, I’m simply trying to restore a second test copy. Thanks in advance.

Hallo zusamnmen, ich nutze Veeam schon etwas länger und möchte nun wieder einmal eine neue Umgebung aufbauen.Wir haben Veeam B&R, eine QNAP Rackstation, eine Synologys DS723 und WASABI Cloudspeicher. Bei anderen Setups hatte ich immer nur 1 NAS.Dort habe ich es immer über Scale out Repository gemacht. Nun möchte ich es im Endeffekt so haben, das eine NAS als iSCSI angebunden wird und dann eine Kopie in die Cloud und auf die andere Nas (räumlich getrennt) geht.Welche NAS als iSCSI und welche als remote, lasse ich mal offen.Wie würdet ihr das ganze am besten Aufsetzen? Liebe Grüße :)