Solved

HiWe have Fortinet Fortimanager and Fortianalyzer running as VMs. Up until last week, these got backup up absolutely fine. We upgraded these from 7.2.11 to v.7.4.8. Since then, the backups have been marked as suspicous with potential malware activity detected.I’m wondering what is going on. It may just be a coincidence but I don’t believe there is any malware.If I mark the backups as clean, the next backup just gets flagged as suspicious. This only happens on these 2 VMs. All other backups are running fine.  Has anyone come across this sort of issue before? Or am I missing something somewhere?ThanksRoy   

Hi everyone,I believe I’ve encountered a bug in Kasten K10 version 8.0.6. When creating a backup policy using a preset that includes block mode export, I noticed that the system automatically forces "Export snapshot references only", even though the preset explicitly specifies full volume export and a PersistentVolume (PV) is present.To test this, I created a policy that should export the full volume. However, once applied, the policy is transformed into "Export snapshot references only", and even after removing the policy, the export behavior remains unchanged.Has anyone else experienced this issue?Thanks in advance!

Has anyone set up an HA Cluster with Veeam 13 and figured out how to update the SSL for the FQDN that is used when managing a cluster?  When I go to my FQDN the SSL being is used is the Primary Node SSL so the browser shows unsecure.I would have thought this would have been done automagically when setting up the cluster.  Any ideas or thoughts from those that have done this?

Hello, I am trying to simulate retention for Veeam Agent Linux with this information:So it's a “Forever Forward Incremental” retention mode.The problem is that there is no periodic full backup with this retention, and it seems that the calculator does it by default:  I find 1.3TB, whereas if I calculate manually:   1 full backup (300GB source, 50% compression) = 150GB 29 incrementals (5% daily change, 50% compression) = 15GB × 29 = 435GB Total estimated storage: 150GB + 435GB = 585GB  Is it possible to simulate this type of retention? Best regards,Thomas

I have setup a new server on our network. Connected to domain, network, hyper-v installed and I am unable to add this server to the Virtual Infrastructure > Microsoft Hyper-V > Standalone Hosts > (server).  I have my Veeam server trying to contact our new server and there seems to be a road block. I am running Veeam V11a trying to setup a new 2019 windows server. During the hyper-v setup process I have added the name and/or IP address, I have selected the last option (standalone) which matches the description of the new server.  My credentials do work because I ran a test to setup a VM running server 2019 and I was able to set that up right away. For some reason the physical server is blocking the Veeam connection.  Is there a firewall exception I need to add?  I did attempt to manually add the physical server to Veeam so the agent might create its own firewall exceptions. I was unsuccessful at that as well.

When trying to add a Hyper-V host to VBR 13 from either the web console or GUI, we receive the error ‘Samba failed with error: NT_STATUS_ACCESS_DENIED - Can’t load /etc/samba/smb.conf.  The same error occurs when trying to add MS Server 2022 and 2025.  The MS server has it’s firewall disabled.Anyone else experienced this issue?Dave 

Hi Community,Does anyone knows if the calculator is under maintenance for CPD replication?I’m getting the error below. 

Hello everyone,I am new to this community and have already tried my luck in a closed thread about the Veeam VM Migrator Utility.However, I currently have a question about this utility.Are there any experience reports on migrating individual vSphere VMs using the Migrator Utility?Is individual migration with this tool even intended? Thank you in advance for your feedback!

Since yesterday all our existing configured backup jobs to Azure Blob storage are failing and attempts to create new object storage repository are failing on Validating Credentials.  Error: Unable to access object storage (reason: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (xstorageaccountnamex.blob.core.windows.net:443))Any ideas?  I’ve tried rotating the access key in Azure and updating that in the Cloud account in Veeam m365 backup.  This has started to occur a week after upgrading to v8 which was ok initially.

Hi all,I want to update Veeam Agent for Windows from 6.3.2.1205 to 6.3.2.1302. The in place upgrade doesnt’t work:  Will my backup job settings be safe when I uninstall the current installed agent and reinstall the new version of Veeam Agent for Windows?Kind Regards

I started my first backup on the 9th. I have retention set to 12 days and Synthetic on Saturdays (default)  . No files have yet been removed from my NAS. I have attached details 9kinow there are extra backups on some days) but its over 12 days now. When will deletion start ? Tony

Does VAMWF support scheduled backup jobs?  I was able to create one with the GUI, but it didn’t run, probably because there was no entry in Task Scheduler.

 "Failed to establish connection: no valid IP addresses were found. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 10.x.x.x:10005"The problem here is my Veeam VM is not on that network. It is only home network 192.x.x.x using  hyper-v switch.  The network referenced in the error strictly a closed vlan for security cams which is a secondary nic on the host server.  The host server and domain controller backup fine but the win11 clients Veeam keeps trying to use secondary nic which is not connected to the vm. AD DNS does not have any enters for the other network.  so somehow it Veeam is trying to use the host server nics at will.I have set the global traffic preferred network to the home network. makes non difference disabled all firewalls on all devices not joy same error.  my only other thought would be to force all the firewall rules to a scope for th

I back up our Organization sites nightly. Sometimes I get a warning on a job that a site was deleted and I have to go into the job and remove the deleted site from the backup. Is there any way for deleted sites to just be removed from the backup automatically? So the program is only backing up what exists?  Note that currently ‘select objects to back up’ is set to ‘back up the following objects’ which is 23 of 25 sites. So I don’t have ‘Back up entire organization’ selected. Although would that maybe be my fix and dynamically adjust what sites are available to back up? 

I’d like to setup Veeam Windows Backup and Recovery for 1 physical PC. What software and license are required to set this up?

I need to migrate multiple VMs from the old vCenter to the new one and want to keep the existing Veeam backup chain. Is there an easier method than the Veeam VM Migrator Utility?

Hi all,  Maybe I’m not understanding how the Backup Server calculation at https://www.veeam.com/calculators/simple/vbr/server is supposed to work, but seems to give inexplicable results. 1000 Workloads with 500 workloads per job (2 jobs) == 36 cores, 80 GB RAM 99999 Workloads with 500 workloads per job (300 jobs) = 12 cores, 24 GB RAMLess extreme examples produce similar results, seems like we end up with kind of strange requirements no matter what values are added.

We have recently inherited a Kasten system and we are trying to (1) understand how Kasten works and (2) figure out why some of our applications are non-compliant. One issue that we are currently investigating is why one application in particular always fail due to timeout. We are trying to backup a namespace with a couple of PVC:s (using CSI:s - Ceph RBD and Ceph FS). The total backup size is approximately 1.5 TiB.When we first noticed an issue with this application, we saw that the backup failed due to timeout (10h). We then increased the timeout (to 24h) and the next backup worked! (It took 11h.) However, all subsequent backups have failed due to timeout. We have been troubleshooting this for quite some time now but have been unable to find anything conclusive. The worst part is probably that we don’t really understand where in the Kasten deployment to look for relevant logs. Any help figuring out the particular issue or general information about best practices w.r.t. troubleshooting

Hallo an alle,ein herzliches willkommen nun auch von mir. Ich leg direkt mit einer Frage los. Ich würde gerne meine Veeam Agents for Microsoft von der Version 6.3.2.1205 → 6.3.2.1302 updaten.Die Agents sind managed/deployt zentral durch meinen B&R Server. Ich möchte aber nicht meine komplette B&R Umgebung dafür updaten. Gibt es eine Möglichkeit, nur die Agents für Microsoft zu aktualisieren?Danke euch.Viele GrüßePhilipp  

We have received an update alert for recent CVE for KB ID 4771, to install a patch. What we want to understand is not in any guide, is - Is this patch just for our Windows VBR server…? Are there any pre reqs. Going through the setup of the .exe from the ISO there are no checks and no reboot required, this was tested installed on a non Veeam server which may not give the correct results…?Thanks in advance Tony

Just installed brand new Widnows 10 VM, installed 12.1 veeam backup and replication but what ever I do this does not work.  Checked and all services are running  any thoughts would be much appreciated. 

Hi, this is my first time posting on here - hoping to get some advice from the wonderful community!I have been busy studying for the VMCE exam and I’m close to the point where I am ready to take the exam. I was doing some research into where/how I book the exam and I came across this on the Veeam website:This is very unfortunate timing on my part, but I was wondering if anybody could tell me what is replacing this exam? Have I wasted months of my time prepping for an exam that is being retired? Any advice would be greatly appreciated

Hello Veeam Community,I’m performing a restore process in Veeam Backup for Google Cloud and encountered an issue after the data restoration phase. Here are the key log details:  The disk restore completed successfully, but the instance restore failed due to snapshot creation error. Question:Has anyone faced this issue in GCP restores? What could cause snapshot creation to fail after disk restoration? Any recommended troubleshooting steps or permissions to check? 

hello!client of Veeam for 10+ years, previously use Veeam Backup & Replicationnow we add another server and need additional licenses, our Veeam seller said, that we must change our product and now we are proud Veeam Data Platform usersbut how with convert our installation from VBR to VDP? backup server be the sameI must uninstall VBR and install VDP or there is more safe way?(i ask this 24 October to Veeam representatives, but don’t get answer at all) BRSaules Ieleja 

We have licensed Veeam via Socket License and want to Backup our Windows DCs from a different Console than the Rest.They are running on the same ESXI Hosts as the other VMs we already Backup.Is this possible with our license?