Discussion Boards

In addition to Veeam's current capabilities for ransomware recovery and prevention, Coveware by Veeam will offer proactive enterprise readiness and industry-leading cyber-extortion incident response services. Through the Veeam Data Platform, Coveware will provide proactive services, forensics, and remediation capabilities to Veeam Cyber Secure clients. https://www.veeam.com/news/veeam-launches-most-complete-support-for-ransomware.html 

hello,I have two instance of Veeam with Hardened repository. On each there is one Job and this contain all VMs from specyfic vCenter.But on one instance of veeam i have one VIB file per day contining all VMs and on second instance I have one VIB per VM per day. Is it configurable somehow on second instacne to also have one VIB file per day for all VMs??  Thanks,

Hello Veeam Community! This is a community thread so we can talk about our VeeamON 2024 experiences. Join the chat and share your thoughts about the events and announcements.Are you participating virtually or in-person? Wh

Customer's tape needs to be erased, prompt  Error  Unable to perform Tape erase for library IBM 3573-TL E.70: cannot lock tape drive。I don't know how to operate it

Hi guys,I have a problem when searching for information in jobs type "EpAgentBackup", in the "Backup" type I can search for all the information, but in "EpAgentBackup" I can't... I would like information like the following:                Job                          = $JobName                Name                      = $jobObject.Name                Size                         = $jobObject.ApproxSizeString

We tried to  restore ( entire computer ) one of our production computer due to slowness. we tried multiple full backups from different dates. But all restored Hard disk ( New ) having some booting issue.Automatically go to automatic repair mode and failed Cant boot into safe mode Went through the startup chkdsk - failed** Noticed a warning as shown on the image during restore process . does it related to this booting issue ? 

Hi All, I need a Veeam powershell command to fetch agent based backup. I am using below command to fetch last night backup status but it doesn’t include agent based backup. Get-VBRBackupSession | Where-Object {$_.JobType -eq "Backup" -and $_.EndTime -ge (Get-Date).addhours(-24)} Do you know single command to fetch all types of backup or different command for agent based backup? Thanks in advance

Actually, we logged the case to Veaam support team for some issue. they analyzed upgrade the Veaam server version from 12.1.1.56 to 12.1.2.172 and we are getting notification for upgrade the version on Veaam console. As per my understand, can we do through below steps ?first completed all jobs then disable all job take a configuration backup to another location. then start upgradation from Veaam console.is it right process or can we upgrade from new latest version install on same server ?Please suggest.

Hello,We are using self-service portal for our backups and we've discovered different size for each backup job. For example backup job on portal is showing 747,1GB of given backup but vbk file showing 855GB. what is the reason of this differences?thanks,Ladislav.

I have an Netapp A900. Volumes have a lot of shares in them. Adding shares individually would be tedious. So the question is, can I add the entire volume to a NAS job and then Veeam will protect all shares within the volume ?

I have a tape library with 4 drives. Veeam seems to be only using 2 of them. For example, right now I see all 4 drives - 1 is writing to 1 tape job, a 2nd is writing to another tape job, the other 2 drives are sitting, showing “idle”. Yet I have 5 more tape backup jobs sitting in queue, all showing status “0% completed”. Why isn’t Veeam writing some of those jobs to those 2 idle drives? I do have a setting on each tape job to limit it to no more than 2 drives, because I don’t want any 1 job to monopolize all tape drives. But Veeam seems to think that means to use only 2 drives *total*, not per-job. Have I missed some setting? Or set something wrong? I have a lot of data to write to tape every night, and more to come. In fact, I am waiting on 2 more tape drives, for a total of 6. But Veeam isn’t utilizing all the drives in the library. I did ask Tech Support, while I was troubleshooting another tape issue, but I never got a resp

Tape issues, Hey guys, I have been round and round with support and we are not getting far I have 28 tapes in my tape library and VEEAM sees them and reads them, but they are only showing 107gb free of 107gb total storage.  These are 30tb LTO8 drives and the systems UI itself shows the drives are 100% clear thoughts on what else I could try? I have done everything using the itdt.exe tool and still no luck    Thanks in advance

Hey folks,I want to share this one cause there are already impacted organizations.Cybersecurity experts have identified a critical zero-day vulnerability in Checkpoint’s security software that hackers are actively exploiting. The flaw assigned to the identifier CVE-2024-24919. Summary: A high-severity vulnerability (CVSS: 8.6), identified by CVE-2024-24919, has been discovered in Check Point products. In its bulletin dated 28/05/204, Check Point reports that this vulnerability allows enumeration and extraction of all password hashes from connected users, which could be reused later.Affected Versions:For Check Point Quantum Gateway and CloudGuard Network products, the affected versions are: R81.20, R81.10, R81, and R80.40. For Check Point Spark products, the affected versions are: R81.10 and R80.20.Solution: To mitigate the risks associated with this vulnerability, Check Point has pub

Hi Everyone,  I have a notification of potential malware detection on one of my VM with the message "potential malware activity detected: *.purge(Globe):1”  Does anyone know how to resolve this ?

Cloud team has done final sync-up of the source and destination bucket , so we disabled the backup job , created one object storage repository with the new aws account and then added to the capacity tier extent of existing SOBR , but we are unable to see the synchronize data option , please help

I know the answer is really “it depends”, but if customer says “what would you recommend” ..as they tend to do, what would be your go-to recommendation. Feel free to offer other options.

Hi Everyone, VeeamON is next week. I have some new shoes!! Also for all the shoe lovers out there don’t worry my previous pair are in good health! 😂  

Can someone help me with info on how Veeam processes parallel VMDK’s? Does it uses VDDK Libraries or bypasses VDDK and uses its own libraries?  I have seen few backup solutions still struggling to achieve this parallel processing.  

a)I have a VBR 12 running on Postgre DBb)I am setting up another VBR and this time I dont want to use the default Postgre DB.Hence I an selecting Miceosoft SQL Server but its asking me to create the SQL Instance first. Am I supposed to install SQL Full Blown Instance or SQL Express Instance?  

Sadly, as my friend @Scott , I wont be able to attend this year,my family will grow and we are expecting this to happen at the end of July, so too risky.Im very happy and surprised about all Im seeng with the Virtual Event,Isnt like in person, Miami was a blast and a dream! but Hopefully I will catch the things that cut my eye, and engage with y’all and enjoy the presentation.I will miss the hallway talks, brekfasts, swimming pool and parties… OMG, Im gonna stop writing or I will start to cry.Thanks for preparing all this Virtual experience for the ones not allowed to attend in person.To me, Im still in love with the “Direct to S3” backup, Now the implementations in my case turn the table to be more flexible with Branches and ROBO offices, same with Home VIP users with the Agent.The Cyber and Malware features are more than welcome!Im very exited and looking forward to the “big announceme

Hello, Thanks, I cannot install latest VBRso this is what happened.For years, at VBR 11 installed and worked great. thanks veeam! Now, tried to update to latest 12.1. i downloaded .iso and checked md5 hash. That update failed, complained could not uninstall veeam for linux. I tried again to update and this time, instead of being asked to upgrade, i was only given option to Install. I tried to install, but VBR complains about seen belowSo I tried to manually remove VBR using:https://forums.veeam.com/veeam-backup-replication-f2/how-to-uninstall-v12-community-edition-completely-t89675.htm

We have Veeam Data platform enterprise plus premium license and need to install license file on physical laptop client. but no luck. we tried to install same license file on physical laptop. but no luck.Please suggest.

Hey all,I have installed veeam backup in GCP and in the policies I have created, both the snapshot and the backup are working (attached images).now i would like to clone this backup that veeam has generated, in a new instance of GCP, but i don't see how to do it.the idea is not to use the veeam windows backup (VBR) or another system, but to do it from GCP.take the structure that veeam has created when leaving the backup and restore or clone the machine in GCP.I don't see the option to do it. maybe it is not possible. someone help me to clarify this issue.I have consulted articles like the ones below, but they do not help me:If it is not possible to do it as I indicate, and I have to use VBR as a prerequisite, what is the point.I mean, is it essential to use it? is it mandatory to hav

Hi all… greetings…I am wondering if expiry date can be shown in the Veeam GUI under backup properties?With using Dell DataDomain immutable repo