Discussion Boards

I’ve randomly had two backups corrupt at one of my clients. Not sure why it happened, but they did. On one of them, I deleted from disk all of the restore points on the local datastore, and took a new full. I left the cloud data alone, and as we speak, the new restore points are peacefully transferring offsite, no issue. The second backup has been a different story… Because of the nature of the server, I decided to take a new full and leave the old data in place, just in case. The new full local backup was fine, but the offsite failed. I tried running an active full of the offsite, but same deal; the offsite failed. So now I am trying a new strategy. I took a look at the restore points and 99% were corrupted (I believe this was the offsites), so I decided to just wipe everything and start from scratch, because I think the corrupted restore points are causing issues with the new data going offsite. The offsite failures have been throwing an error I’ve never seen before.

Team,Having a hard time trying to get physical server boot from the bootable media if Secure boot enabled. Docs says it is supported, but I can boot up from the media as soon as it is disabled. See the error below. Any suggestions?  Cheers,Alex

Time to celebrate as Veeam rated as 19th position out of Top 100 #cloudstorage See the Link  as follows The 20 Coolest Cloud Storage Companies Of The 2023 Cloud 100 | CRN

Hi All, Currently we do an Instant recovery from the ‘Entire Computer’ backup taken by Veeam agent, it goes for P2V conversion. Once the instant recovery completes, when we initiate ‘Migrate it to Production’ (may be to VMware Hypervisor using dedicated proxy which can handle 4 concurrent tasks. But it seems Veeam is treating the restore as single task and the number of VMDK files/Disk associated with the restored VM is migrated one by one which prolongs the RTO. Is there a way to consider each VMDK file as separate task (which will allow for parallelism) during the entire VM restore (using instant recovery method and ‘Migrate it to Production’)?

FYI, for those of you with WordPress sites (looking at you Vanguards, but I’m sure there are others), I came across a nice plugin for backing up to Wasabi.  This isn’t really Veeam specific at all, but I figured I’d share anyway.You can find a WordPress plugin called backWPup and create a Wasabi bucket and point the plugin to backup there.  Wasabi actually has a page dedicated to it, but honestly, it was so easy to setup, it was probably unnecessary.  It can of course backup to FTP, Dropbox, Google drive and such like most apps, and there are probably other plugins that do this as well, but since a lot of folks have Wasabi accounts already, I figured it might be helpful for others if they don’t already have something in place.https://wasabi-support.zendesk.com/hc/en-us/articles/115001900632-How-do-I-use-Ba

Hello world.Hello friend.Welcome to Cyber Security Space. There will never be truly secure backups and backup storage if we don't learn the fundamentals of cybersecurity.Veeam offers awesome solutions to protect you from ransomware or data corruption or backup consistency or much much more. Think about 3-2-1-1-0 rule. Secure Restore. Immutable backup. S3 buckets. Harden Repository. And you'll see what's next in ver12!Amazing solutions, but all of them need our expertise to make them operational, safe and functional. This space was born for this: to help us to understand the vast world of cybersecurity so you can build up your knowledge and be a better IT girl/guy/sysadmin/sysops/ethical hacker/programmer/devops/cat-on-rex/unicorn.What can you do at the Cyber Security Space?1. Create posts and share news2. Check for FREE certification and course

Happy Friday everyone! Anyone that’s worked with Kubernetes for some time has probably seen or used aliases for common commands. For those that don’t know what an alias is in this context, it’s creating your own shorter command that executes another binary. For example, typing k to run kubectl. I was on Twitter the other day and saw Mick Douglas commenting on the state of the Microsoft Graph API, which by itself is a good read: As I got further in I saw an incredibly funny alias he’d said that he’d created to circumvent his frustration:And I just thought it was brilliant! Especially when you see it in action: That’s my story for

HelloSorry if this is a basic question or a topic already discuss in the forum, but I really need advices regarding GFS before doing an upgrade from version 10.0.0.1 to version 11 .In the documentation it’s said: “Do you have backup copy jobs with synthetic GFS full backups? Before the upgrade, make sure that all GFS candidates (incremental restore points created on days when GFS was scheduled and that are expected to be transformed into full GFS restore points) are already transformed into GFS restore points. To force the backup copy job to transform all GFS candidates, you can temporarily decrease the short-term retention to a value less than the number of restore points between the latest restore point and the most recent GFS candidate and then wait till all the candidates are transformed.” I’m not sure what they meen by “short-term retention” This is my config:

This little thread got me thinking, and makes me wonder….if you’re tasked with backing up data with a 50 year or 100 year or infinite data retention, this is more than just running a backup and storing it somewhere.  Because what good is a backup that is 30 years old if you have no infrastructure to do anything with it? On a somewhat related topic, I once had a client that needed to keep their Dell/Quest RapidRecovery backups for 7 or 10 years.  They were looking to move to something like a Dell IDPA appliance (I proposed Veeam with a DataDomain).  But the question what, what do you do to keep the servers and MDxxxx DAS’s appliances with the data available for the next 7-10 years?  Or do you somehow convert or restore all of the data and move it to your new backup solution whenever there is some sort of major change

For legal purpose we have to make a full backup of one of the server and store it in either the server or tape for infinite retention. If I click on inventory, vcenter server, server name, there are few options like Quick backup, add to backup job….. Can the copy of the backup job be stored for infinite retention in the server since we do not have tape copy activated. Can this job be also used to restore files from backup.Backup server stores files(.vbm and .vbk) for 5 months but the edit backup job retention policy is 12 days. Not sure how the files in the backup server are stored for 5 months.

Did you know there is a curriculum in VeeamIQ called “Veeam Advanced Concepts for Partners”? I didn’t until last night. Like the description says, the videos are all about 10 minutes long and cover all topics like how to set up the backup server, proxies, repositories, transport modes, NAS, CDP, VCC, Automation, Tape, SOBR, etc. Take a look if you haven’t seen this before. This is a great resource for deeper learning or for review of areas you don’t work with often.  

I was wondering if anyone else does this.When we delete a VM, I often have someone come ask me where it was 6 months to a year later and sometimes there is something unnoticed that is broken. Due to the amount of storage we use here (PB’s) I tend to not want to keep all these old VM’s powered off, or even on the Veeam SANs as they take up a ton of space for something that most likely isn’t needed. To resolve this I created a media pool on both tape libraries that has a retention of 2 years. When I power the VM off for the final time I do a Veeam zip, then add it to a file to tape job at both sites.In the file to tape job I just grab the VBK from the repo and then can remove the Veeam ZIP when it’s done.  Even though it’s not 3-2-1 technically the VM’s are requested to be deleted anyways. If I lost them it wouldn’t be critical. Having them on tape is cheap, and people are very happy when they can get their data.    

Hi guys, what is the best option/tool/software to migrate, minimizing downtime, VMs from an esxi host with Intel CPU to an esxi with AMD CPU? I can think of: Veeam CDP policy Veeam quick migration VMWare cold migration VMware converter Can you think of any other methods? Marco S.

My backup job suddenly occurred the error beloow:Failed to pre-process the job Error: Failed to call RPC function 'FcWriteFileEx': The file or directory is corrupted and unreadable. Failed to open file [D:\Backup\Backup Job Hyper-V\Backup Job Hyper-V.vbm_1_tmp].Error: Failed to call RPC function 'FcWriteFileEx': The file or directory is corrupted and unreadable. Failed to open file [D:\Backup\Backup Job Hyper-V\Backup Job Hyper-V.vbm_1_tmp]. Thanks a lot for any help.

I know this question has been mentioned several times on various boards, but I have not found one specifically for SQL Express.Anyone have an idea?Unable to truncate Microsoft SQL Server transaction logs. Details: Failed to process 'TruncateSQLLog' command.Failed to truncate SQL server transaction logs for instances:  SQLEXPRESS. See guest helper log. This is one of the errors in the log:1/30/2023 9:06:49 AM   2772                                  Database found: DBName. Recovery model: 1. Is readonly: false. State: 0.1/30/2023 9:06:49 AM   2772  WARN                            Cannot truncate SQL logs for database: IncuitySample.     Code = 0x80040e141/30/2023 9:06:49 AM   2772  WARN                                Code meaning = IDispatch error #30921/30/2023 9:06:49 AM   2772  WARN                                Source = Microsoft OLE DB Driver for SQL Server1/30/2023 9:06:49 AM   2772  WARN

Hello Northwest Veeam Customers and Prospects!2022 was a Veeamazing year! If you missed what happened or need a refresher, please join Vinh Pham and Benjamin Petersen for the upcoming Northwest Veeam® User Group (VUG) recap meeting this Wednesday from 12 p.m. — 1 p.m. MT. During this technical session, tell us what Veeam features you want us to discuss, what demo you want to see and get answers to your technical questions.Register Now!

Morning all! Happy Friday! As the first month of 2023 draws to a close, most New Year’s resolutions of being healthy, or picking up a new hobby, or quitting a bad habit, tend to lay in ruins. So I ask, what goals have you got for 2023? It’d be nice to commit them to this topic and then see how everyone did over the year. It could be passing an exam, learning a new technology, a career change, or anything! What’ve you got in mind? I’m aiming to finish my Azure Architect journey by achieving the AZ-305 certification, and learning more about Kubernetes. 🙂

Hey guys,I am trying to get a Veeam Restore report from Veeam One Web client but I am not finding Veeam backup & replication widget. Can anybody suggest what should be done next?

Is there a way to test the encryption key on backups without having to run a restore? I ran into a situation recently where the encryption password did not work on restored data. I want to setup Enterprise Manager for everyone, but in the interim, I’d like to manually test each encryption key and reset it/run a new full backup if need be. Is there a way to recover an encryption key with Service Provider Console?

Hello Team,Quick question - Does the Veeam Replication Re-IP concept work only for VM with Single network adapter?What if the replicating VMs has multiple network adapters? The Re-ip cannot be used?Thanks in advance!~ Ravi Kumar S

Job site - Backup USB\site - Backup Job cannot be started Job failed unexpectedly Job finished with error. How do I correct this issue? We have plugged and unplugged USB drive but that did not resolve the issue. Using Veeam Back and Replication 10

Hi, everyone! I have a weird error popping up in a replication job for one of my client’s and I need some insight. We have a replication job with a number of VMs that are replicating to a local repository. For some reason, the job has started failing and saying the job can’t continue because the replica has been found in an inaccessible state. I’ll paste an example below. I have tried rescanning the repositories and rescanning the managed servers, but no luck. Retry of Replication job finished with Failed. Job details: Failed to create processing task for VM Error: Found replica VM *** with connection state inaccessible. Cannot proceed furtherFailed to create processing task for VM *** Error: Found replica VM *** with connection state inaccessible. Cannot proceed furtherProcessing *** Error: The request could not be performed because of an I/O device error. Failed to write data to the file [\\.\***Drive]. Failed to download dis

I have two sites a HQ and a remote office on the opposite coast that are connected via VPN, both are running Veeam B&R on a local server at each location to perform local backups. They also do a pull replication of each other for DR. I’m also running Enterprise Manager at HQ. How can I script the server(s) so that the remote pull replication job runs AFTER the local backup job so that the snapshots don’t overlap? I was hoping to use Enterprise Manager to trigger the job to run after the backup completed, but it can only see the local jobs, not the remote ones.

Hello Community,you probably already use the Powershell scripts shared with the community and run them unattended. In the past, unattended sign-in required you to store the username and password in a local file or in a secret vault/txt-file that’s accessed during run-time. But, as we all know, storing user credentials locally is not a good security practice. Microsoft will also disable access via Remote Powershell (RPS). See the following link for more details: https://techcommunity.microsoft.com/t5/exchange-team-blog/announcing-deprecation-of-remote-powershell-rps-protocol-in/ba-p/3695597So why not hit two birds with one stone?The MissionThis post will talk about how to configure Exchange Online Certificate Based Authentication (

Version 12 of Veeam B&R is nearly hereif you haven’t registered yet: https://go.veeam.com/v12and so is our desire to try it in our homelab and play with it in the evening, after dinner. It may happen that we dust off an old workstation with enough resources but one or more Realtek network cards.If we install Hyper-V, everything will almost certainly go smoothly. And in case we wanna install a VMware ESXi solution? Well… We gonna have some headache, thanks to the lack of official support for that hardware. In fact it’s common that network cards remain offline.This mini guide can come to your rescue.You need at least 1 network card operative. If you already have the necessary .vibCreate a datastore and upload the VIB on your host.