Discussion Boards

I have a Hyper-V VM in TN. Our VBR is in TX. I set the backup job for said Hyper-V VM to use on-host proxy and store data to a repo local to the Hyper-V VM in TN.  Started the job ~1940 CST and let it run, it was stuck on 50% completion, and stuck on hard disk 1 processing (like below) for almost two hours. I ended up stopping the job, not gracefully, but immediately. 7:41:16 PM    Hard disk 1 (931 GB) 1024 KB read at 1 MB/s    01:49:24 I’m using an NFR to test this because we have a Hyper-V VM in TN that we want to bring to TX but to VMware using Instant Recovery (Instant Recovery to VMware vSphere - User Guide for VMware vSphere (veeam.com)) I was directed here for possible help. I have logs here h

As of now I know that Veeam VBR is not supported the Cluster solutions.Is there any plan for Veeam VBR clustering in future any body know that?Couple of my client asking for Veeam VBR cluster solution,

Hi all, I’m working to understand more about question in object. In specific I start from @regnor blog using StoreOnce. If I set an immutability ends in 3 years but a customer want to exit from this service after 2 years what are the correct ways to remove all backup data after export? I know good start is to have xx days (30?) for immutability but if customer wants GFS policy up to 3 years immutable how can I operate? I know this is a MSP based question for this I hope someone can help me.Thanks.   

Can we please have an option to export the configuration of a VBR VLAB. And create a VLAB from this export? Too many times the VLAB gets broken and support just states recreate the VLAB but its like 50kazillions configuration option to reconfigure. I have 6 VBR VLABs to manage and its rough keeping up with this.  

Worked with 5 different Veeam support resources and implementation specialist with my problem. DRO backup testing restores to a stack and creates mass migrations because of vCenters DRS. Tried forcing it to use the required VLAB and its reservation that VBR restore test uses. But for some reason ive been told DRO was designed to not use this existing VLAB reservation. Can this be implemented? 

Hello all,I'm doing backup of client Windows 2022 Standard. Active full backup failed on similar error but different file. Then incremental backup failed as is listed below.my OS backup failing all the time by error message:2/18/2024 8:03:09 PM :: Current file C:\Windows\System32\d3dxof.dll and backed up file D3DSCache.dll are different  2/18/2024 8:04:52 PM :: Task C:\Windows\System32\d3dxof.dll failed: Current file C:\Windows\System32\d3dxof.dll and backed up file D3DSCache.dll are different  2/18/2024 8:04:54 PM :: Incremental backup: Current file C:\Windows\System32\d3dxof.dll and backed up file D3DSCache.dll are different   VSS on server is enabled and working properly when I did backup over OSin my log I see only:[17.02.2024 11:42:16.547]

Why Veeam isnt’t able to use the whole capacity of LTO-tapes? E.g.: Why can't Veeam write a new mediaset to the end of another mediaset?Tapes are in the same mediapool. Mediapool setting “Do not create, always continue using current media set” ist active. If i edit some settings on Backup-To-Tape-Job, a new MediaSet-Name is setting. On next run of this job veeam uses a new fresh tape, although the last tape still has enough storage capacity.I’ve got LTO-7 Tapes (12TB mx. capacity). Veeam uses, for example, only 2TB of capacity in case of doubt.

My company have 20 servers location in 4 different locations (Hong Kong, Shanghai, Beijing, Guangzhou), I would like to know how many license pack I needed to purchase for these 20 instances?

Hello,we are just some newbies in Veeam and have following problem.The Veeam Linux Agent 12.1 is correctly installed on an Oracle Linux Machine i have tried both methods, manually and per install service from Veeam Backup and Replication Server, the installation were completed with DKMS and build step what is workig very well. If i try to make ab backup of the machine i receive errors in Serverlog as follows:creating volume snapshot;thanFailed to take snapshot;Broken Pipe;Failed to write data into pipe.the linux log:[29.01.2024 08:01:29.072] vmb | [SessionLog][processing] Creating volume snapshot.[29.01.2024 08:01:29.073] lpbcore | Polling request: [job][UpdateManagedJobXmlLog][29.01.2024 08:01:29.780] lpbcore | Polling request: [job][UpdateManagedJobXmlLog][29.01.2024 08:01:29.780] lpbcore | Created snapshot [b9e92c64-5562-479d-8e2a-625ead940a8f][29.01.2024 08:01:29.783] lpbcore | Finish ora

HI,    A backup job failed since the windows-host been reinstalled. Here is the error message: Cannot connect to 192.168.1.11 Details: The network path was not found. The network path was not found. (ERROR_BAD_NETPATH).The default share of ADMIN$ has been set, and the port 445 is open.Shoud I clear all of the setting and data-file of the host ?What is worng?  Thanks a lot!

Hi everyone,We are currently using Veeam CDP and are very pleased with its performance. However, we would like to configure the CDP bandwidth to utilize its own VLAN instead of the LAN network. We are operating within a 10GB physical network environment.Thank you for your assistance.

I was looking in to an issue today for something and happened to look at the Veeam KB page that shows versions and updates for v12.1 - KB2680: Build Numbers and Versions of Veeam Backup & ReplicationI noticed there is a cumulative patch that released on the 17th (Wednesday) with a new build 12.1.1.56.For those that are using the Veeam Hardened Repositories this update addresses the need for the SSH to be enabled for updating.  I have run tests, and it works much better for updating.You can download it here - KB4510: Release Information for Veeam Backup & Replication 12.1 and UpdatesIt also addresses a bunch of other fixes as well like the Invalid XML when opening reports that some reported here - 

Does Veeam plan to provide an install platform for Linux-based OS, referring to the installation of the Veeam Backup and Replication Application?

Hello all,I have really small environment(manufacture) with 2x virtual server on HyperV where HPE autoloader is connected over switch. This autoloader is used as backup destination of course. After installation of Backup Server on one of the servers(this server has also other role), Veaam discovered share and automatically added as Backup Repository. This share has different purpose, not for Veaam. Because is the only repository I'm not able to remove it from Veaam. Any hint?

Hello,I have a backup job (file backup) that is stored in a repository with rotating disksWhen i try to restoring a file it tells me that it cannot find the backup What is the correct method of restoring files in a repository with rotating disks? Thanks

I have a user who is having issue logging in to the VEM Self-Service portal. We have added groups to have access and I have added myself to their group so I can test every now and then.I can login just fine as a member of the group but he keeps getting Invalid username or password error. We are sure that his credentials are good since he is able to use them on other servers and applications so it is only in Self-service portal where he is getting the error. He cleared his browser’s cache and used other browser as well to no avail.I looked at the Veeam.WebApp.log, these are the entries that I see for the userConnecting to [ServerBEM] under [current account]. Selfrestore modeFailed to create user context from authentication data. Data: [Username: domain\user,  Invalid username or password (System.Security.Authentication.InvalidCredentialException) When I login as part of their group, this is what I seeConnecting to [Server

I am using Evaluation Enterprise License on Veeam server and actually I manually installed Veeam agent for Microsoft windows 6.1.0.349 and CBT drivers in windows 10 endpoint system. As per my understand, once installed CBT drivers, if any file level changes then incremental backup will perform. But it is not happened. So what is the use of CBT and how to work ?

Veeam Backup & Replication 12, I have already installed the Server,and I have one old Filesystem and one new Filesystem,I can add the old one to protection group, but the new one Failed.The network environment is same for both FS.And there seem like no problem when I Ping them.What can I do next to find out the problem? 

Hopefully someone with experience can help me with this. I'm struggling to understand the SOBR in combination with GFS, and if what i want is possible within Veeam.What i would like is the following:Backup job to local storage attached to backup server. Copy result to tapeThis i can manage. Now...Copy result to SOBR containing: Performance tier: local repo immutable, store recent 4 weeks Capacity tier: Azure S3 hot immutable, store recent 4 weeks (copy instant checkmark) Archive tier: Backblaze S3 immutable, store month and year backupsI'm trying to save cost here, so what i don't want is for Veeam to send the files from Azure S3 to Backblaze S3, since this will result in read and egress costs. What happens on the last week of the month? Will Veeam SOBR copy from performance tier (thus local to Backblaze (ingress)), or will it copy from capacity tier?Or should i us

Current setup.I have a regular Veeam backup job. It backs up my VMs, keeping 15 copies.I have a backup copy job, that copies the backups created above to the performance tier of my SOBR. This job has set as the retention policy: 2 restore points.It also keeps 13 weekly, 13 monthly and 5 yearly backups.  The option ’Read the entire restore point from source backup instead of synthesizing it from increments ’ is setIn my SOBR, I have the option set: to Copy backups to object storage as soon as they are created. Move the backups to object storage as soon as they age out of the operational restore window: Move backups older than 1 days.What this results in is:15 backups in the backup repository from the regular backup job. Up to 7 daily backups in the SOBR performance tier AND in the capacity tier. They get deleted as per Veeams retention-logic. But always a minimum of 2. Weekly/Monthly/Yearly ba

 HiSQL servers encountered this error What could be the reason and how should I fix the problem?

Good morning friends I'm having a problem that has never happened to me, when trying to open the program options it gives me the error in the photo. Has it ever happened to anyone?  

im trying to open veeam backup and replication console i update to latest version (12), and the program wont start it close at splash window. i had the 11 version and happnened again. i went trough a network problem in my job and some of the virtual machine get damage. i want to restore it but need help to open veeam backup and replication.

I need assistance in adding  a veeam agent   

I’m currently using Veeam B&R v12. Having a screen Refresh option would be nice rather than having to constantly hit FN F5 on my keyboard.