Solved

Hey guys, I have a query.If you can see the attached screenshot, if I want to store the backup in secondary destination, will the backup run on both the primary and secondary destination simultaneously on the scheduled time?

Hi  What kind of permission is needed to install K10 and for the daily admin operation in K10 ? Is a cluster-admin role in K8S mandatory ? If not, what permissions are required ? Thanks Chris

Hey community, I want to use VBR 11a and VeeamPluginforSAPHANA to backup my SAP HANA database.Howerver, the test result is not ideal, Processing rate is only 1M/s.In my environment, the bandwidth between the VBR server and the HANA server is 10Gbps, and I have tested it with iperf3, everything is OK. and when I use VBR to backup VMs and NAS, everything is OK too. I also tried to set up different repositories using SapBackintConfigTool, but it doesn't work.What could be the reason? tks. 

If the source VMs have virus/infected, technically Veeam can backup that but can Veeam knows that the source is infected with virus/ransomware?

Hey everyone.Can anyone give a reason on why immutability is setup for linux and amazon cloud storage and not for windows and other cloud storage like azure, GCP?

Quando ci sono molti job che si possono sovrapporre, cercavo un tool che mi rendesse un grafico dei vari job nel tempo.Attualmente lavoro manualmente facendo un estrazione dei vari report e mettendoli su un foglio di calcolo, estraggo un grafico che mi permette di vedere le sovrapposizioni, impiegando parecchio tempo.Vi è mai capitato ?

Following on from the excellent advice on what kind of storage server (and direct attached storage within) to use for a hardened Linux repository, may I push my luck to ask for some more advise or where to go next. Presuming I can get my hands on a suitable storage server and storage (as recommended) could anyone shed some light on how we’d need to set this up so that Veeam is able to back up the data on our Infortrend SAN. Here’s some further details of our config.We have a Windows server in our (remote) data centre that is running Veeam B&R v11. It is currently just making some physical backups of critical Windows and Linux hosts. These hosts are physically located in our office and there is a decent enough secure connection to make these backups over the line to the Veeam server in the data centre.However, I want to expand our use of Veeam to make regular backups of the TB’s of data on our Infortrend SAN which is also based in our office and this is where my lack of experience/k

Hi, I am getting below warning which I need to increase the disk size of catalog and job servicesDisk space for service Catalog is low at 17%Disk space for service Jobs is low at 17%Please advice if you share with me the command to increase the disk size of the services  BR, Ali

Hi, We have a lot of backup copy jobs (but far from all) that fails with the error “Failed to dispatch repository file session resource requst. Requested amount of file session (193) is greater than the maximum amount available (192).According to HPE Veeam should know that this StoreOnce has a internal limit of 192 datastreams and should not try to open number 193.  Anyone with a idea of how to fix this?

We have provisioned VBR in production, tecnically with compute and storage. Can we replicate the recovery points from prod VBR to VBR dr? In dr, we will provion as well VBR dr resources.  upon checking with veeam, they can replicate in the dr but the source is the vcenter prod as well, meaning 1vbr is enough as long as they vcenter in dr. Thanks

Hi there. Need help with backup Windows machine to Synology via SMB. I create user with password on my Synology, create a shared folder on my Synology.Than i create New backup job in Veeam Agent. After i complete all fields (i passed a check pair user/password), i receive error (on screenshot). I tried connect shared folder on Syno to Windows machine - it's ok. One more thing, when i push the "Apply" button in New backup job, in the shared folder created file and delete after half second. What i do wrong?I translate the error: "The filename, directory name, or volume label syntax is incorrect. (Exception from HRESULT: 0x8007007B)" 

If I were to create a new copyjob to replace an old one, and I want it to only move over the very latest restore point and none of the previous restore points that are currently in the repository; can this be accomplished by taking a new active full on the source jobs and then running a sync now on the new copyjob and telling it copy over the latest? If not, can this only be accomplished by wiping out all current local and cloud and starting from scratch?

Hey community, can we perform replication job of agent based backups?

We have VMware private cloud, consists of different VMs for different customers, technically is has 1 center. We have a separate infra of backup, with them as a backup solution, different Veeam instances as well for different customers,Now we have ongoing project for backup and provisioned veeam instance1  we will connect to the vcenter of our vmware private cloud and assuming it will be successful, moving forward for veeam instance2 3,4, and so on and we will use as well the existing vcenter for different instances. Is there any problem or error since Veeam instance1 already connected to the existing center? Then definitely we will connect other Veeam instances2, 3,4… Thanks

I run Veeam B&R 11 on a Windows server but at the moment it is just making some physical backups of a number of critical Windows hosts and a few EXT4 volumes on Linux hosts.The majority of our data (give or take 125TB) is hosted on a SAN (mirrored) exposed as EXT4 volumes via iSCSI on a Linux server.As an extra level of backup, I want to start backing up this data on a regular basis with Veeam B&R 11 onto a new suitable storage server with sufficient Direct-Attached Storage or some kind of NAS unit, preferably with this storage configured as a hardened Linux repository in Veeam.This storage server would be in a different location to the SAN, but connected over a 10GBE link.Has anyone got some advice on what would be a good hardware solution for this Linux-based hardened repo?Should I be looking at one of the larger Synology NAS units with sufficient capacity (not sure if this can be used with Veeam as a Linux repo or would a dedicated server full of storage be a better option.

Hello Techies,We use Veeam Backup as our backup solution, and I am planning to configure Veeam as follows to make sure that our data are safe during a primary site unrecoverable disaster.Regularly backup configuration and keep it external storage source ( One Drive, external HDD ..etc )  At the end of each backup, I will configure a copy job to secondary storage  The secondary storage will be mapped from the DR site using the site-to-site link.So, after each job, a copy will be placed into secondary storage and the secondary store will be on the DR site. In the event of primary site unrecoverable disaster, I will perform as follows 1- Install fresh Veeam software 2- Restore configuration3- Map secondary storage backup LUN / Volume 4- Restore from secondary storage Am I missing something? any suggestion? 

While  creating backups in a Hyper-V environment, you need several permissions to be able to properly snapshot and process a VM. What are the  permissions are not necessary for on-host backups, if used?Full Access permission on the targetfolder and share access given. 

Hi guys One of our customer hosts VBO on a Azure VM with managed disk as backup repository. Not the best practice and most cost efficient, but customer started with VBO v2 :)To the problem: Customer tries to restore a sharepoint site of 50GB with many files. The restore performance is quite bad around 3MB/s with bottleneck shown as source.Are we hitting against Microsoft limitation? CPU and disk on VBO VM is low during the hole restore time. Also tried with SSD as managed disk without any effect. SincerelyDaniel 

hi team can any you explain me where the veeam Credentials is store? if it's store in the sql database is the Credentials is encrypted? is it possible to recover Credentials from sql database? 

as v9 only ntfs is supoorting bitlooker? any update in V11 or not.

Production Environment is a four Node VXRail VSAN Cluster. Backup Server is separated on a Physical Machine with local Storage and Backup Jobs are running fine.Want to use SureBackup to proof that my Virtual Machines are could be recovered after been backed up.  Setup everything what is needed for SureBackup but the Job went wrong.At the End i figured out that something goes wrong on the vPower NFS which uses Port 1063 and Port 2049. But even i change the Port 1063 to 1058 there is no success.Have someone a clue what ports are needed for VXRail to work? 

Additionally, for users with tape installations (for file to tape jobs processing more than 1,000,000 files):1.5 GB RAM for file to tape backup for each 1,000,000 files 2.6 GB RAM for file restore for each 1,000,000 files 1.3 GB RAM for catalog jobs for each 1,000,000 files Please anyone expation what its means?

 I did an installation on a new vm (Windows 2019)of the VBR 11a with sql express and the installation does not go to the end but I have this error there:12.10.2021 17:29:05][INFO] Exception occurred (Veeam products installation section).Info: System.Exception: Exception of type 'System.Exception' was thrown.   at Veeam.Setup.Wizard.VmInstallStagePrereqEngine.Install()   at Veeam.Setup.Wizard.PredefinedDialogs.VmInstallDialog.m_installWorker_DoWork(Object sender, DoWorkEventArgs e)I tried with other source same result ifanyone has an idea :)  

As title says, Veeam's new policies change the license per socket to more advanced type of licensing.Will the “community version” be affected / discontinued?Thanks to all :)

Hello,I want to try Orchestrator v4 but having trouble about "Recovery Locations". I can able to select "target storage systems" and "target datacenter" but when ı came to "target compute resources" could not see anything to select.Env; vcenter 7 u3 and Netapp ontap 9.7.Ps; ı was able to see hosts from one collect with vm's. Also can not see "compute resources" when ı select "restore" options.Any idea why compute resources not showing ?Thanks in advance,