Solved

Hey All, Our Synology no longer supports NTLMv1 which is causing the Veeam SMB Repo to disconnect. Anyone know of a way to set the SMB level in Veeam to 2 or higher minimum? Thanks. User [veeam] from [IP address] failed to log in via [SMB] due to [NTLMv1 not permitted].

Hello,We have a VBR 10 with Enterprise Manager in a physical Windows Server 2012 R2. Also we have a secondary VBR 10 in a virtual machine 2012R2 in an external site.I have to migrate all the products to version 11 and I would like to know what is the best way to backup all the configuration necessary to restore the servers in case of problem.I read that I have to perform backup of the SQL Server configuration databases used by Veeam backup servers and Veeam Backup Enterprise Manager server, to easily go back to a previous version in case of issues with upgrade. So, In case of problem, I can go back to a previous version with the built-in configuration backup and the SQL Server configuration databases backup, right?it’s also another option to do a Veeam Windows Agent Backup of that physical server from the other VBR in the external site?Thanks in advance, Omar De Souza.

Hello y’all! I’d like to know what software or tools you often use to project and draw your Veeam environments.Do you use MS Visio, LucidChart or something else?

Hi,i work for an MSP where a lot of clients are small businesses still using Shadowprotect. (even larger clients..) not always setup by us, but as we onboard them we want to start converting to Veeam.Certain smaller clients have physical machines acting as the Veeam B&R Console + backup repository with WD RED NAS HDD’s (only for the purpose of a backup destination, not a failover/actual backup server - due to $$)I’m trying to design a standard quote to help our sales team for a certain client type that doesn't mind spending a bit more money.Thinking of a Lenovo SR250 Maybe?? as the “entry level” Veaam setup(virtualised). (if clients require faster recovery against host failure of their production servers then a custom quote would be created for more of a 1:1 setup)I just want something that will still allow for replication failover (run replicas decently)So consider this, most these clients have a Domain controller VM, File Server VM, and MAYBE exchange VM.The backup server host wo

HiMy setup is as follows : - 1 server (in a workgroup) with Veeam ONE (service account of service is a standalone user, member of Veeam ONE Administrators group and local administrators group)- 1 server (also in a workgroup) with VBR- several domain-joined Hyper-V serversProblem is situated in Veeam ONE : Adding the hyper-v servers with a domain-user (with of course local administrator group) is no problem.Adding the VBR server with a local administrator account is no problem.Adding Veeam ONE Agent on the VBR server is no problem.Problems : - in Infrastructure View : I am getting the error of bad hyper-v username logon attempt (refers to the user being used as service account on the server with Veeam ONEthe info of the Hyper-v server seems to be correct including the CPU graphs and so..Is there a way that another user can be chosen to collect the data instead of the Veeam ONE service account?- in Data Protection View : VBR server is not responding and getting the alarm : Server connect

We have total of 700 VM , we are planning to migrate 200 VM in first phase and 500 VM in second phase , we have veeam on front end and HP storeonce 5650 on backend ... I am not sure how to calculate number of catalyst required for total 700 VM for replication between two data centers ...is there a formula for this ..could some one please help

 Could anyone share tutorial for configuring repository replication (backups) for Google Cloud Storage?t's giving user login error, I'm having configuration difficulties between Google and Veeam for Storage Standard

Hello,  I have a monthly tape job that started last Monday. Today I found that the tape job failed with the Data error (cyclic redundancy check) for some backup jobs.I decided to manually start again the same tape job with new cartridges, however, I realized that it’s taken only the missed backup jobs from the previous failed jobs, for the other backup jobs the result is “success” but with the message “no backup files found”. Do you have an idea? Thanks in advance, Omar De Souza. PS: VBR 10

Hello there,I have a backup job which was going seamlessly. but in the last days it was failing after reaching 80% with error message attached below. I tried the job by disabling firewall rules nothing new occurred. All backup infrastructure components are working fine for other VMs. I have also checked firewall logs but there is nothing blocked related to this backup.Error message:Error: Unstable connection: unable to transmit data. Failed to upload disk. Skipped arguments: [vddkConnSpec>]; Agent failed to process method {DataTransfer.SyncDisk}. Exception from server: An existing connection was forcibly closed by the remote host Unable to retrieve next block transmission command. Number of already processed blocks: [11956]. Failed to download disk 'VM-Name.vmdk'. I need to figure out how to resolve this issue immediately.

Dear all,Apology I am a newbie here and my question may sound naive. We appreciate any help from your guys.We used Tivoli in the past to backup Oracle for both long term data keeping and DR. We created 3 sets of tapes. 2 sets would  be always in the tape library and one at remote site. Every 2 weeks we get back the offsite set and load it into library, and send one set of tapes to remote site for storage.Could you please give some idea how to set up file-to-tape job (let say daily full backup of Oracle) in Veeam in similar fashion? Our idea is to create a media pool with 3 media sets. One media set online for backup for 2 weeks, another offline in the tape library and one media set in the vault (to keep in remote site). And we will rotate in that way for every 2 weeks.Will that work? We value your input very much.Thank you.Hien 

Hello everyone,So, I just tried out my new tape library (Powervault 124T) and it worked for the first job I did. I erased some tapes, let that job finish, ejected the magazine, reloaded with some tapes that had data, I did an inventory on them, and while I thought it finished. It must not have. I ejected the tape magazine, changed tapes, and discovered there was one still in the drive, and the job was not doing anything. It was stuck.I canceled it, said okay I’m going to re-run it, but now the drives shows locked & I can’t unlock it.

Hello everyone! I’m calcing somethings about blob on Azure and I’d like to know what movement Veeam do when it sends some data to blob.I saw these kinds of things on API Azure:PutBlob PutBlock PutBlockList AppendBlock SnapshotBlob CopyBlob SetBlobTierAny idea?

Dears Community memberi did backup using Veeam Backup and Replication community edition my backup server based in Windows 2012 R2 i do backup from SMB and its success the size i over 100 GB now im trying to restore the files to Backup server by using Restore entire share but the restored size is only 1.3 GB only iam trying with more than one backup set

im testing the veeam in our environment im using veeam Backup and Replication Community edition the backup server is based in windows 2012 R2 im trying to add normal windows PC as physical machine its fresh windows 10 enterprise edition directly and take the Agent from Downloaded ISO but  i found error Current Operating system is not supported or Lacks the required service back what the solutions please

Hello,I use a post-job script and I got an error code … terminated with exit code 11”  Is there a table with all the exit code definitions? ThanksDieter  

Product: Veeam Backup & Replication Community EditionIssue: exception was thrown during licensing process Additional Details: when copy from Nas using SMB below error occured7/4/2021 7:19:40 PM :: Failed to perform file backup Error: Unhandled exception was thrown during licensing processany help please  

is there a link tojoin to get the t-shirt

I did get a private message from the user haider2012, which is spam obviously. How to deal with it? There is no button like “report spam”.

Can Veeam backup and replication Community edition be installed on Client PC? Can we control security for the user so that they will not have access to modify configurations.

Cleaning tape is in slot 10 and unrecognized. Can it be visible in Media Pool? What would be the process to replace the cleaning tape and add it to the slot. Where do I find the I/O slot? Sorry asking basic questions will be taking a training course soon. We are using Community edition Veeam Backup and Replication 10

Hi All , Hope great.I was practicing some fail-overs last night to our DR. If I am correct it seams that after you fail over the original VM from Prod it does not shutdown. This leaving two machines on the network with the same IP.Very keen to hear your thoughts. Being Prod and DRSincerelyJay

What do you guys think of installing ubuntu server as  a VM on Qnap 8Bay - Raid 10 NAS.Then pushing Immutable backups to it. The NAS will not be connected to the internet.I would love to learn the possible risks and vulnerabilities of this?We still follow the 3:2:1 rule. This is just for extra.Thanks all.Jay 

Hi, everyone! I have a quick question about coypjob intervals. If I have my copyjob set to 1 day starting at 4am, does that mean that the copy starts at 4am and runs until 4am the next day and then just starts over? I am seeing some warnings about things not being copied over in the copy interval. I’m a little confused on how this works. How can I make the copy interval longer?

Hello everyone, I need to restore “incremental backup” to another “new server” on the network.I have “export disk” to VHD from backup the “old server” and attach this disk to “new server”.In this moment I need to restore “incremental backup” to “new server”. Is this possible? Thank you

Hi All - Hope well.I was hoping some one could shed some light on this. It seams when I replicate VM’s from our production server to the DR server, hyper V also makes a snap shot.What is the correct way to start the replicas? I imagine just for the replication job to stop and then start the VM’s normally on Hyper V without using Hyper V snapshots?What is the correct procedure? - I would also like to use the fail-back option so I dont want to hyperV snap shots to upset the process. Please find the image attached. Thanks all!