Solved

Hello,I’ve upgraded from 4.5.10 to 4.5.13 this week, since then my backups are failing.Looks like there is a new ambassador version since 4.5.12, which can’t be pulled (Back-off pulling image "quay.io/datawire/ambassador:2.2.2")Can’t find that image version on the quay.io registry. Is this a known issue? 

I try to backup a VM Machine on hyper-v but i get error: 20.04.2022 10:56:18 :: Processing DC-01 Error: There are no available IP addresses to connect to Hyper-V Integration Service.   How can I solve this, with anoter hyper-v server it works. Thx Peter

Hi,Can anyone guide me as to how to take backup from QNAP using Veeam B&R community version. I tried various ways such as create protection group but it is not able to install veeam agent and likewise but not able to configure.Please adviseManish

Hello everyone,I am trying to federate the Kasten setup behind an Ingress Controller (see here for more info https://blog.kasten.io/posts/how-to-set-up-alerts-in-kasten-k10-to-immediately-catch-failed-backups) . It seems that everytime my Prometheus server tries to scrape data from the Kasten K10 Prometheus instance, located at the address http://<ingress>/k10/prometheus/federate it requires a login. I managed to do that by passing “authorization: credentials: inside the Prometheus job config.Are there anywhere any best practices to do it? What kind of service account, with restricted permissions, shall I create in order to just have the exact permissions to get monitoring data?Thank you!Mattia

Hi,Since I am new to Veeam B&R, I faced an issue that if I close Veeam B&R app will the backup jobs schedule will execute or not ?Because I observed that after clsoing the app Backup was not executed.Please advise Manish

Hi,I recently started using Veeam B&R community version. Successfully taken backup, now I want to know as to how to restore the data. Manish

Hi,Hereby attached backup job screenshot, can anyone guide me the options to be configured as best practise.Manish

Hi,  I have one VBR Server 11 wherein I have created the SOBR having capacity tier of azure blob.  While creating SOBR I have defined move policy with 0 days.  My retention policy is 7 days with 1 full and 6 incremental.  My requirement is to move the data onto azure blob automatically as soon as it reaches to performance tier.  In my case data is not offloading to azure blob and veeam is taking its default counter of every 4 hours with 0bytes of data offloaded to azure. Can anybody help? Regards,Sunny 

Sottopongo alla community un tema dal quale non riesco a trovare via di uscita.Ho un file server windows con filesystem deduplicato che ogni fine settimana esegue il processo di garbage collection. Il processo di garbage muove in quella circostanza 700GB-1TB di dati che Veeam tratta e backuppa di conseguenza. Questo delta significativo incide in maniera importante sullo spazio del repository ( repository linux con file system xfs + immutabilità ) portandolo a riempirsi.Chiedo se qualcuno ha un consiglio su come aggirare il problema, agendo lato Microsoft o lato Veeam, o se siete a conoscenza di best practices per queste circostanze di cui tener conto.GrazieLuca  

Hello, 3 days ago I upgraded Veeam Backup & Replication from 11 to 11a (11.0.1.1261).Since then in the notifications in case of Warning I’m not getting the Details anymore.Actually I know the details of the warnings because they are “historical” and I can still see them in the console, but why they are not written in the e-mails anymore? (see example picture attached, the last column is empty even in case of Warning)Thanks for your help.

i have some backups that are failing   

Customer is running backups of their VM’s at PROD site to at SOBR and running a backup copy for that job to their DR site (also to a SOBR).   They want to replicate some key VMs to their DR site as well and was hoping to seed those replicas from a the backup copy at the DR site.  Apparently seeding replicas from a backup (or backup copy) on a SOBR is not supported.   Trying to understand why not and how to work around this other than going back to non-SOBR backup repositories?  

We attempted a disaster recovery test for servers backed up at Wasabi and 7 of our 8 servers recovered just fine.  We have a decent sized file server (2.4 TB) that won't restore from the capacity tier storage.  It gets to the same point each time and fails.  We have a support ticket and have attempted some fixes and no luck.  We would like to clear out both the performance and capacity tier of this one server so that it can create a new full backup at performance and then send the new backup to wasabi.  What is the optimal way to clear this out?  Just select this server from that object storage and select delete from disk on that server?  Or should I create a new job with this one VM and run it?

Hey guys,Is Veeam endpoint backup now called agent backup?

I have installed Veeam B&R Community Edition. I have to take backup from x.x.x.6 to x.x.x.10I have successfully created Backup Repository for x.x.x.10Now I am creating Protection Group where in I am adding x.x.x.10 from where I have take backup. As soon as I Test the credentials (Either Local Host / Domain ) in both cases I am receiving the below error. I tried to OFF the Windows Defender but then also no success. Kindly advise 

hello everybody, i want to backup my server ubuntu to external repository (Google cloud storage).i find folder result backup from veeam on google cloud storage. How to restore from the google cloud storage file to vm like Aws EC2 or GCP ? This file a result SOBR from veeam to google cloud storage  

VBR 备份的时候是通过vphere去选择的备份服务器，如果vphere挂了，还原备份的时候会有问题吗？

Hello Team,  I am working on a project where customer would like to backup their M365 data (mailbox, onedrive, sharepoint etc.) using Veeam Backup for Microsoft Office 365 and also backup Azure VMs using Veeam Backup & Replication.  I see Azure has both these available in the market place. So if I use them and deploy them directly on Azure Subscription it is good enough right? Or should I need any other instance of Veeam Backup and Replication or Veeam Backup for M365 in on-premise infra or Azure VM etc.? Cause I saw this video - Here I see the Veeam is installed else where and we are trying to connect to cloud appliance. So I am confused 

我是做了一个定时备份任务，1个T的容量，第一次完备大约是300多G ，后续的增量每次约30G左右。我定时任务约3天一次。备份仓库容量有限约4T左右，每次30G不是很快就满了吗。如果执行完备后一个会覆盖前一个吗？，增量备份算法上他是如何覆盖的。。。求大佬指点

Hi team, I have a new backup I am running that is failing at the first full. It fails and says that it cannot find a VMDK file that is located in an excluded disk. The error reads: “Processing servername Error: File 'X.vmdk' was not found. This disk is a USB attached storage device, but it was added to vmware as an iscsi drive so that we can exclude it in VBR. I have double checked the disk exclusions and confirmed that I have told the job to only back up the correct disks (the disks that aren’t this USB attached storage). I have also checked the checkbox to remove excluded disks from configuration. The file is present in vcenter. I checked. I can’t figure out what is going on and why this job is failing due to a file that should not even matter because I have excluded from the job, the disk the file is located on.

This is more of a processing issue but . . . I have one VBR system that processes some rather large file servers.  We’re going to be setting up Scale Out Repo to Wasabi into an object locking bucket.When Veeam locally merges the latest incremental into a new full, does it push the complete newly created full out to the bucket or is there some magic that happens where Veeam is only updating the current full that’s sitting out in the cloud.  People with small internet pipes want to know.  With a small domain server it’s no big deal to push 20gig but when it’s 25TB…..I’m also going to assume since Veeam is in control of the object locking and retention, I won’t have to figure out when things will be unlocked and the magical merge is going to happen.Thanks ahead of time.

Hi !I’m using the extract utility for test all the password of encrypted jobs and it work well. Just a problem when the password contain a double quotes (“).I pass the good password but it seem that the extract utlity fails when we used password with double quote.The main command i use is that one : .\Extract.exe -dir $full_dir -password $mdpI got the error message “Password is incorrect”obviously I already have verified the password and he is correct. Does anyone have an idea ? or do i have to change all the password that contain a double quote ?

Hello everyone!I am using kasten k10 v4.5.8 (with airgapped installation) on kubernetes rke v1.21.8 and I am performing some logical backups for some db (Mongo/Postgre/MsSQL).The snapshot are exported to a S3 Compatible MinIO Object Store (version RELEASE.2022-02-18T01-50-10Z) that is installed on barematel infrastructure.I defined some policy to backup application three times at hours and as retain I have defined 'ONE HOURLY EXPORTED SNAPSHOT' to have one local and exported restore point.In the blueprint I have the delete phase that is  delete: inputArtifactNames: # The kopia snapshot info created in backup phase can be used here # Use the `--kopia-snapshot` flag in kando to pass in `mongoBackup.KopiaSnapshot` - mongoBackup phases: - func: KubeTask name: deleteFromStore args: namespace: "{{ .Namespace.Name }}" image: ghcr.io/kanisterio/mongodb:0.72.0 command: - bash - -o - errexit - -o - p

HI,We are doing a POC on client with all instalation parameters OK. There are 3 CSV volumes and on volume02 with 104TB all VM backup failed with this error: Failed to create snapshot (Microsoft CSV Shadow Copy Provider) (mode: Crash consistent) Details: Unknown status of async operationVss error: '0x80042306' Only with this CSV Volume.Does anyone have any idea?ThanksWeberth Moreira

i am updating Veem backup free edition but it is sending me an error.[05.04.2022 15:53:29][INFO] Creating Installer Application instance.[05.04.2022 15:53:30][INFO] Installer Application instance created.[05.04.2022 15:54:04][INFO] InstallerEngine session started.[05.04.2022 15:54:04][INFO] Stopping tray application.[05.04.2022 15:54:04][INFO] Tray application successfully stopped.[05.04.2022 15:54:04][INFO] Stopping exisitng services...[05.04.2022 15:54:05][INFO] Service name: VeeamEndpointBackupSvc[05.04.2022 15:54:05][INFO] Service process: Not specified[05.04.2022 15:54:05][INFO] Stopping service...[05.04.2022 15:54:16][INFO] Service successfully stopped.[05.04.2022 15:54:16][INFO] Exisitng services have been stopped.[05.04.2022 15:54:16][INFO] Checking presence of Microsoft Universal C Runtime redist.[05.04.2022 15:54:16][INFO] 'ucrtbase.dll' module is found, redistributable is already installed.[05.04.2022 15:54:16][INFO] Checking presence of Microsoft SQL Server 2012 System CLR