Solved

Hi, I was working with older version of veeam long ago and I remember I never had any issues with it, currently I am trying to set a backup and restore solution and I’m evaluating veeam with our Ovirt Node 4.5.4 infrastructure.I did the setup step by step and later installed the RHV plugin and connected to the engine and got the proxy vm up and running I can setup backup jobs and all is good until this point, I do get a warning during backup but it finishes anyway, here is the error I get :{VM-Name}: Image transfer URL is inaccessible: CURL error 6: Couldn't resolve host name, switching to the proxy URLI tried to restore an VM and I am now getting this error and task fails:10/18/2023 2:18:16 PM Error    {VM-Name}: Unable to write data block. Offset=0, Size=1048576 : CURL error 6: Couldn't resolve host name10/18/2023 2:18:12 PM Error    {VM-Name}: Data transfer error10/18/2023 2:18:12 PM Error    {VM-Name}: Unable to write data block. Offset=0, Size=1048576 : CURL error 6: Couldn't reso

Morning all. Hoping someone can help identify the best method available to us for migrating to new hardware. Overview of current setup:All in one VBR server (physical)  Currently on v11 Local storage (ReFS volume)  SOBR using Wasabi S3 for the capacity extent. Backups are copied to capacity.  1 job (agent managed) backing up 7 physical servers at remote sitesOverview of new setup:All in one VBR server (physical)  Fresh install of v12 Local storage (ReFS volume)How would we best approach moving the data/job from the current setup to the new setup? The approach needs to consider the following: Ideally, we want to use VeeaMover in v12 to move the data between current and new setup so that we maintain the ReFS block cloning savings.  The storage from the new system cannot be directly attached to the current system, but the servers are on the same LAN.  We want to use a SOBR on the new system that utilises the same Wasabi S3 bucket so that we don’t have to re-seed wasabi (if this is possibl

We are planning to replicate from DC to DR. which ports need to be open for this? we just replicate and recover from replication we also plane deploy the Backup proxy at DR. Thanks 

Hi Heros,can some one tall me details about the VRO? Like what is the main purpose of using VRO, what is the license type for VRO, I have currently VBR enterprise so if i want to using VRO which type of License I need, If my primary VBR goes down is it possible to recover the VBR using the VRO? is it possible to use VBR like the cluster? I know that Veeam Not supported the clustering, so if I need cluster type solutions what can I do for this? Thank you

Hi, my customer has centOS 8 installed on bare metal, i have already installed agent on centOS8 but it showed not supported. any solution ? 

hi veeam communityI want to turn on the firewall of the backup server and configure the firewallI have veeam backup and enterprise manager on my serverThe servers that are backed up are mostly on hyper-v cluster.There are several physical servers, including SQL Server, which is also a cluster.My question is how can I do this very accurately and professionallyIs there a tool for this?How can I test whether I have considered all the desired ports or not?Thank you for sharing all your experiences with me 

Hello,I’m trying to setup backup policies, but almost all policy runs fail at the action “Exporting RestorePoint” with the following error: cause: cause: cause: message: '["{"message":"Failed to export snapshot data","function":"kasten.io/k10/kio/exec/phases/phase.(*artifactCopier).convertSnapshots.func1","linenumber":408,"file":"kasten.io/k10/kio/exec/phases/phase/copy_snapshots.go:408","fields":[{"name":"type","value":"CSI"},{"name":"id","value":"k10-csi-snap-rttwnskswscjph98"}],"cause":{"message":"Error creating portable snapshot","function":"kasten.io/k10/kio/exec/phases/phase.(*gvcConverter).Convert","linenumber":1178,"file":"kasten.io/k10/kio/exec/phases/phase/copy_snapshots.go:1178","cause":{"message":"ActionSet Failed","function":"kasten.io/k10/kio/kanister.(*Operation).Execute","linenumber":114,"file":"kasten.io/k10/kio/kanister/operation.go:114","fields":[{"name":"message","value":"{\"message\":\"Failed while waiting for Pod to be

I have a Hyper-V VM in TN. Our VBR is in TX. I set the backup job for said Hyper-V VM to use on-host proxy and store data to a repo local to the Hyper-V VM in TN.  Started the job ~1940 CST and let it run, it was stuck on 50% completion, and stuck on hard disk 1 processing (like below) for almost two hours. I ended up stopping the job, not gracefully, but immediately. 7:41:16 PM    Hard disk 1 (931 GB) 1024 KB read at 1 MB/s    01:49:24 I’m using an NFR to test this because we have a Hyper-V VM in TN that we want to bring to TX but to VMware using Instant Recovery (Instant Recovery to VMware vSphere - User Guide for VMware vSphere (veeam.com)) I was directed here for possible help. I have logs here https://we.tl/t-CHOg5OnEjz  (make sure to click Agree if prompted, I tested it out using WeTransfer). If anyone could point me to the direction “why” the job froze and didn’t process the disk, I’d be grateful. EDIT: P.S. - The second hard disk processed fine.. 7:41:16 PM    Hard disk 2 (931

As of now I know that Veeam VBR is not supported the Cluster solutions.Is there any plan for Veeam VBR clustering in future any body know that?Couple of my client asking for Veeam VBR cluster solution,

Hello all,I'm doing backup of client Windows 2022 Standard. Active full backup failed on similar error but different file. Then incremental backup failed as is listed below.my OS backup failing all the time by error message:2/18/2024 8:03:09 PM :: Current file C:\Windows\System32\d3dxof.dll and backed up file D3DSCache.dll are different  2/18/2024 8:04:52 PM :: Task C:\Windows\System32\d3dxof.dll failed: Current file C:\Windows\System32\d3dxof.dll and backed up file D3DSCache.dll are different  2/18/2024 8:04:54 PM :: Incremental backup: Current file C:\Windows\System32\d3dxof.dll and backed up file D3DSCache.dll are different   VSS on server is enabled and working properly when I did backup over OSin my log I see only:[17.02.2024 11:42:16.547]    <01>    Info (4)    Task progress: '62%', '40,494,724,824' of '65,038,805,285' bytes, '40,494,724,824' of '40,494,724,824' used bytes, object '45784' of '377750', totals calculated: Yes[17.02.2024 11:42:16.547]    <01>    Info (3)

Why Veeam isnt’t able to use the whole capacity of LTO-tapes? E.g.: Why can't Veeam write a new mediaset to the end of another mediaset?Tapes are in the same mediapool. Mediapool setting “Do not create, always continue using current media set” ist active. If i edit some settings on Backup-To-Tape-Job, a new MediaSet-Name is setting. On next run of this job veeam uses a new fresh tape, although the last tape still has enough storage capacity.I’ve got LTO-7 Tapes (12TB mx. capacity). Veeam uses, for example, only 2TB of capacity in case of doubt.

Hello,we are just some newbies in Veeam and have following problem.The Veeam Linux Agent 12.1 is correctly installed on an Oracle Linux Machine i have tried both methods, manually and per install service from Veeam Backup and Replication Server, the installation were completed with DKMS and build step what is workig very well. If i try to make ab backup of the machine i receive errors in Serverlog as follows:creating volume snapshot;thanFailed to take snapshot;Broken Pipe;Failed to write data into pipe.the linux log:[29.01.2024 08:01:29.072] vmb | [SessionLog][processing] Creating volume snapshot.[29.01.2024 08:01:29.073] lpbcore | Polling request: [job][UpdateManagedJobXmlLog][29.01.2024 08:01:29.780] lpbcore | Polling request: [job][UpdateManagedJobXmlLog][29.01.2024 08:01:29.780] lpbcore | Created snapshot [b9e92c64-5562-479d-8e2a-625ead940a8f][29.01.2024 08:01:29.783] lpbcore | Finish oracle dbs backup[29.01.2024 08:01:36.774] lpbcore | PostgreSQL is processed.[29.01.2024 08:01:36.

Does Veeam plan to provide an install platform for Linux-based OS, referring to the installation of the Veeam Backup and Replication Application?

Hello all,I have really small environment(manufacture) with 2x virtual server on HyperV where HPE autoloader is connected over switch. This autoloader is used as backup destination of course. After installation of Backup Server on one of the servers(this server has also other role), Veaam discovered share and automatically added as Backup Repository. This share has different purpose, not for Veaam. Because is the only repository I'm not able to remove it from Veaam. Any hint?

Hello,I have a backup job (file backup) that is stored in a repository with rotating disksWhen i try to restoring a file it tells me that it cannot find the backup What is the correct method of restoring files in a repository with rotating disks? Thanks

I have a user who is having issue logging in to the VEM Self-Service portal. We have added groups to have access and I have added myself to their group so I can test every now and then.I can login just fine as a member of the group but he keeps getting Invalid username or password error. We are sure that his credentials are good since he is able to use them on other servers and applications so it is only in Self-service portal where he is getting the error. He cleared his browser’s cache and used other browser as well to no avail.I looked at the Veeam.WebApp.log, these are the entries that I see for the userConnecting to [ServerBEM] under [current account]. Selfrestore modeFailed to create user context from authentication data. Data: [Username: domain\user,  Invalid username or password (System.Security.Authentication.InvalidCredentialException) When I login as part of their group, this is what I seeConnecting to [ServerBEM] under [domain\myself]. Selfrestore mode:Remote session opened

I am using Evaluation Enterprise License on Veeam server and actually I manually installed Veeam agent for Microsoft windows 6.1.0.349 and CBT drivers in windows 10 endpoint system. As per my understand, once installed CBT drivers, if any file level changes then incremental backup will perform. But it is not happened. So what is the use of CBT and how to work ?

Hopefully someone with experience can help me with this. I'm struggling to understand the SOBR in combination with GFS, and if what i want is possible within Veeam.What i would like is the following:Backup job to local storage attached to backup server. Copy result to tapeThis i can manage. Now...Copy result to SOBR containing: Performance tier: local repo immutable, store recent 4 weeks Capacity tier: Azure S3 hot immutable, store recent 4 weeks (copy instant checkmark) Archive tier: Backblaze S3 immutable, store month and year backupsI'm trying to save cost here, so what i don't want is for Veeam to send the files from Azure S3 to Backblaze S3, since this will result in read and egress costs. What happens on the last week of the month? Will Veeam SOBR copy from performance tier (thus local to Backblaze (ingress)), or will it copy from capacity tier?Or should i use plain copy jobs with GFS?

I’ve had a problem with a Windows 10 workstation waking up from S3 sleep every few minutes all night long.I tracked the problem to Veeam-created waketimers, created repeatedly by the Veeam.Archiver.Service and the Veeam.Archiver.Proxy.Service.  Stopping those services stops the waketimers, and the system returns to normal sane behaviour.  These services run under Veeam Backup for Microsoft 365 and Veeam Backup Proxy for Microsoft 365. Even when I have scheduled backups turned off at the server console, this keeps happening.  Note, I do WANT the system to wake for backups -- once a night, every night. But that's all.So it appears those services are creating those timers, but I see no Veeam-supported way to stop it or make them behave sanely.  Stopping backups at the console does not seem to affect these timers.Now, I did install Veeam Agent for Windows 6.0.2.1090 -- Workstation Edition as well as backup for Microsoft 365 on that workstation, using a local swapped hard drive, before inst

Hi All,Previously I was a Veeam Legends Members, but i loss my Veeam legends member badge, Now I want to become a Veeam Legends member again. Can some one help me how can I become a Veeam Legends , which step need to be done from my side? Thanks 

I have a new installation of Veeam Backup & Recovery and I’m trying to add an Azure Stack cluster. I’ve tried adding it as a Hyper-V virtual infrastructure but this fails with a very generic permissions type error / node is not a cluster error. The account I’m using has domain admin permissions.I’ve been unable to find any documentation on how this should work. Has anyone experience of this? Andrew

How to take backup over the Inernet? what is the process ?

Hi,Ich habe 2 Server mit Windows Server 2019 Standard und diversen HyperV-Gästen, meist Windows 2019 am Laufen. Ein alter Server mit einem HyperV-Server Betriebsystem (tatsächlich nur der HyperV 2019) ist als Restore/Laborserver am Laufen, um die Rücksicherungen in einer geschlossenen Umgebung zu testen.Manche Restores funkionieren. Manche schlagen fehl mit der Fehlermeldung 32768.Failed to create planned configuration. Unerwarteter Fehler im HyperV-Verwaltungsdienst. Hat da mal jemand eine Idee? GrüßeHeinz

Edited properties of Proxy, compiled successfully. Rebooted Proxy server but still the same issue.

If I backup two Linux appliances (VMware ova) in different backup jobs which have the same SSH fingerprint name but different values so the backup jobs take it in turn to fail after I have trusted the untrusted SSH fingerprint.  They alternate between being trusted.Is there a way for Veeam to trust both or do I need to look at changing the name on one of the two appliances?