Solved

Running Veeam v12 and currently backing up for 14 days to a local HPE storeonce.I want to also put a longer term copy into an AWS S3 bucket for about 1 year. Probably once a month.The best option I think is to perform a backup copy, not via a SOBR.If via copy is there a compatibility issue creating a copy job from storeonce catalyst repos to S3 repos? thoughts?

So we are deploying Veeam for ourselves and I have been fighting with it for a few days.  Our setup is: Veeam server - Non-Domain joinedVeeam Proxy - Linux with XFS volume attached via RDM in VMwareA scale out Repo setup that is backed by the xfs volume from the Linux machineOur primary Altera arrays are also added into Veeam under the storage Infrastructure and i am able to browse the snapshots on them and perform restores. Both servers are located in the same site/network.  The storage is coming from a LUN on an Altera Hybrid array that is presented to both hosts in the esxi cluster.We have a mix of domain joined, non-domain joined windows machines along with some random Linux boxes.  I just have a simple nightly backup job created that has all of our servers included in it.  I have selected the Linux proxy for the backup proxy in the job which then pulls in the Scale-out Backup Repo.  In the advanced settings everything is default with the exception of changing the compression level

Hallo zusammen,heute erhielt ich vom VBS per Mail eine Meldung “Potential malware activity detected (1 malware events)”, die einen Status “suspicious” vermeldet. Allerdings beinhaltet die Mail keinen brauchbaren Hinweise außer, dass ein bestimmter gesicherter Server die Quelle des Problems sein soll.Die Untersuchung der entsprechenden Meldung in der VEEAM-Konsole (Home > History > Malware Events) bleibt auch jeden Hinweis schuldig. Ein Doppelklick auf das Event zeigt weder die betroffene Datei an, noch wird ein Hinweis auf ein Protokoll oder ein log-Datei gegeben.Laut Referenz soll sich das Protokoll im Pfad [%ProgramData%\Veeam\Backup\Malware_Detection_Logs\suspicious_...log] befinden. Der Ordner Malware_Detection_Logs existiert bei mir nicht. Eine Suche nach Ordnern oder Dateien mit dem Suchbegriff *suspicious* ergab überhaupt nichts.Der Befehl [Scan Backup] für den betreffenden Backup-Satz ergab auch keinen Fund. Ein Scan auf der entsprechenden VM fand ebenfalls nichts.Kann es

Hello,I have an environment where I have a domain controller, a domain joined server with a sql server installed. I want to install veeam backup & replication on another server 2022. Do I need to join the veeam server to the domain?Best regards

Hello,Getting the following error when trying to run SureBackup in Veeam which is on a windows server 2019.“Error: VM was created with the later version of Hyper-V than the one installed on host.”The VM’s are configured with version 10 and they are on server 2022. Server 2019 supports only until configuration 9.0.Is there any way to run the surebackup for VM’s with configuration version 10.0 on this host? Thank you.

Hello. Backups failing with message cannot take snapshot on physical server with CentOS Stream 8 and CentOS Stream 9. Please help me fix this. 

Hello to all Backup solutions architects 😀, I will need advice in configuration of our Backups so that I can achieve as close as possible to the 3-2-1-1-0 rule.Our Current Backup Infrastructure is as follow:1 x Synology RS3621xs+ in Vienna, Austria.1 x Synology RS3621xs+ in Novi Sad, Serbia.1 x Synology DiskStation DS1019+ in Novi Sad, Serbia.I wanted to implement Wasabi to our Infrastructure but didn’t get the green light, it is not approved. Current Backups are setup in the following:1. All our critical infrastructure is being backed up to the NAS in Vienna with this configuration:I had an topic where we discussed about not needing Synthetic Full Backups periodically and Active Full Backups both enabled for the job. Need more opinions on this since I’m not professional in Veeam.Current Configuration is set up like this:  I created a Backup Copy Jobs on “Immediate Copy (mirroring) using the two WAN Accelerators. 1 is for our largest VM and 2 is used for other smaller size VM’s all to

I have customer with two veeam servers and we want to de-mote one to just be a proxy. As we transition, could the 2nd veeam server also be a proxy for the main veeam server while we test all backups from the main server. Once all looks good then we can uninstall B&R and just run that host purely as a proxy.thoughts?

Hi All,We are designing a new Veeam Backup Solution. This will be a hardened solution with Linux OS on REPO Server for immutability Snapshot integration will be setup for Veeam to backup from NetApp Snapshots Solution will consist of virtual VMware proxy servers, 1 physical server as the repository server with RHEL installed, iSCSI connected Storage Area Network (SAN) Storage to provide the Repo storage to this RHEL physical serverWe need to understand the Storage Area Network (SAN) Storage requirements such as how much RAM, CPU that SAN should have on the 2 controllers? The Physical RHEL repo server will have 128GB memory, 2 x 18 core CPUs and can see the sizing detail for this in the vse sizer, however have not been able to see sizing around the SAN and the RAM/CPU they should have as we dont want to be in a position where the SAN Controllers are struggling. Thanks, 

Bonjour,Je sais que le sujet a déja été abordé mais j’ai le probléme sur un serveur 2016 qui a un role RDS/AD/FSDepuis l’installation de l’agent sentinel One (23.2.3.358) il n’est plus possible de sauvegarder quotidiennement l’état du serveur.Cela a l’air de bloquer surtout les Srv2016/2019 et pas les 2012R2.J’ai demandé au support informatique de mon client qui supervise le deploiement, mais je n’ai pas de réponse a ma demande d’avoir la passphrase pour arriver a faire passer les commandes que j’ai pu voir sur le support.Je pose donc ma demande ici en désespoir de, car je n’ai pas le droit de desinstaller l’agent Sentinel, mais je dois sauvegarder rapidement et réguliérement ce TSE.27/02/2024 16:03:38 :: Error: Failed to enable DC SafeBoot mode Cannot execute [SetIntegerElement] method of [\\SRVTSE\root\wmi:BcdObject.Id="{87XXXXXX-c9cd-11e9-b85d-4cd98f8782b4}",StoreFilePath=""]. COM error:  Code: 0xd0000022 Merci d’avance pour vos pistes, si je n’arrive pas avoir la passphrase je vais

Environment: Win1022H2, Veeam Agent f. Windows 6.0.0.960, 6 local drivesWhen running backup CBT is functional for all but one drive.Trying to restore gives “driver not installed”There is no option to install Veeam CBT driver Any ideas? Klaus

Hallo allerseits,der Performing backup files health check dauert nun schon 18 Std. und steht bei 60 % done. Während der letzten 6 Stunden wurde gerade einmal ein Zuwachs von 4 %-Punkten “geschafft”.Ist das normal?Ich habe ehrlich gesagt keine Lust, den Rechner noch die nächsten 4 Tage laufen zu lassen, bis die Aktion ggf. mal abgeschlossen ist.Ich nutze Veeam Agent für Microsoft Windows und habe vorgestern ein Backup auf ein NAS durchgeführt (6. inkrementelles).Nachdem die Sicherung wohl abgeschlossen war und der Health Check durchgeführt wurde, wurde die Netzwerkverbindung unterbrochen, der Check konnte nicht abgeschlossen werden.Seit gestern Abend wird nun der Health Check wieder (weiter?) durchgeführt.Hat jemand einen Tipp für mich wie ich den Vorgang beschleunigen kann oder was ich überhaupt machen könnte?Danke vorabGruß Ute

Hi,i have a customer with openshift cluster 3.11 i installed kasten with 4.0.2 for migration purpose, and everything went well.the customer is forced to restart the api server in order to renew the certificate.after the restart Kasten is not able to discover the application inside the cluster. and give me a warning: access denied (user does not have LIST permissions on cluster-scope resources)i didn't configure any RBAC or authorization, i just installed it with the default sa k10-k10 with token authenticationany suggestions?

Hi,I want to test Kasten to see if it will fit in my future k8s cluster but I can’t access the dashboard and I see the pod gateway is always crash and restartgateway-5765cd558f-b5zbs                 0/1     CrashLoopBackOff   7 (4m32s ago)   11mwhen i do:kubectl describe pod gateway-5765cd558f-b5zbs - n kasten-ioin the events I see this:Events:  Type     Reason     Age                   From               Message  ----     ------     ----                  ----               -------  Normal   Created    17m (x2 over 17m)     kubelet            Created container ambassador  Normal   Started    17m (x2 over 17m)     kubelet            Started container ambassador  Normal   Killing    16m (x2 over 17m)     kubelet            Container ambassador failed liveness probe, will be restarted  Normal   Pulled     16m (x3 over 17m)     kubelet            Container image "gcr.io/kasten-images/emissary:6.5.5" already present on machine  Normal   Scheduled  15m                   default-scheduler  Su

Hi,I have successfully installed K10 in my AKS cluster and performed preliminary checks as per the documentation. When running the script curl -s https://docs.kasten.io/tools/k10_primer.sh | bash, all checks passed successfully.However, when attempting to execute the command curl -s https://docs.kasten.io/tools/k10_primer.sh | bash /dev/stdin csi -s azurefile-csi-premium, it failed with the following error:Error: {"message":"PVC failed to become ready: had issues creating PVC: failed to provision volume with StorageClass \"azurefile-csi-premium\": rpc error: code = InvalidArgument desc = copy volume from volumeSnapshot is not supported","function":"kasten.io/k10/kio/tools/k10primer.(*TestRetVal).Errors","linenumber":168,"file":"kasten.io/k10/kio/tools/k10primer/k10primer.go:168"} According to Microsoft Azure File CSI Driver documentation, restoring a volume from a snapshot is not supported for Azure File. The error suggests that Kasten K10 is encountering issues due to the limitations

Hello all, is there any possibility to have report directly from Veeam? We have Veaam v12.2 for really small environment and Installing/configuring VeeamONE is a big hammer for this nail.I would like to have same report as you got when you right click on completed backup job “last24 hours” and click on report. I didn’t find anything that can do that automatically to file.thanks,Ladislav.

I have a 2 node ESXi 7.0.3 host setup and running Veeam v12 to backup 5 VMs to a NFS share (all production VMs exist on node A, NFS share is BSD VM on node B).  The thought is that currently all production VMs can run on a single host and a backup copy of those can be created in a VM on host B.  Each server has qty 2 10Gb network interfaces and I have connected both NICs in a port group and virtual switch along with creating a vmkernel interface on both hosts referencing the correct port group.  After reconfiguring VMWare, I rescanned both ESXi hosts in Veeam and started the backup job.  I am not convinced that the process is using the new 10Gb link between the 2 hosts for the transport process.  What am I missing?

Hi Team, Am facing issues uninstalling VeeamBackup&Replication_11.0.1.1261_20220302.Control panel does not show any Veeam program but when I search through cmd it shows below components. When I try to remove VBR Server is gives error unable to connect to SQL server. Value cannot be null. Parameter name TargetHost. Could you please help if anyone has faced and resolved this kind of issue. 

hi veeam communityIn version 12.1, extraordinary security features are offered, one of which is Early Threat Detection.I want to know what is the out-of-band restore point that is marked in yellow in the picture and has anyone used this feature and has any experience about it? 

Hello together,how can I reverse a hardened Repository on Ubuntu 64 to a normal repository?Thank youRalph

ciao, come dice questa paginahttps://helpcenter.veeam.com/docs/backup/plugins/rman_operation_modes.html?ver=120 con la 12 il plugin di RMAN può lavorare in Standalone, praticamente come era con la 11, oppure in Managed.Mi sono abbastanza chiari i due modi, quello che mi domandav(an)o è:se sono in Managed Mode programmo i job di protezione dalla console Veeam.Rimane possibile lanciare dei backup ‘manualmente’ (o con degli script) tramite RMAN da parte del DBa, oppure no. E quindi, se c’è questa esigenza, si deve restare nel vecchio Standalone Mode?Avete fatto qualcosa di simile in qualche caso?Grazie!

Good morning,What is needed for                - Be individually certified at the commercial and technical level                - Be an authorized reseller of the Veeam solutionSincerely

ciao, con la 12.1 si può fare l’immutabilità con i DataDomain: qualcuno ha già implementato la cosa? Feedback?grazie 😉

We are getting below error message when trying to run a manual backup via VEEAM Plugin.[ERROR]  Failed to backup database ABC. Error: Stopping job session Anyone has any idea about the cause and fix?

Hello all, I have been looking in the forum but I have not found information. In my job we are using Nutanix objects, one of the  buckets shows  450 TB of usage space on Nutanix, but when I review on veeam the backup software it only shows  90 TB. Is there an issue with this space not being reclaimed?, on a  previous post, I found ReFS takes some time to free up space and show the proper amount.I hope you can shed some light on.