Solved

We have multiple backup servers and run a configuration backup on them daily. I’m looking for suggestions on how to keep these config backups safe ?I originally had a script that emailed these to a mailbox to keep “air-gapped”, but the size of the file became too large.  Perhaps there’s a way of reducing these, but I suspect the size will creep up again making them too big. Currently the config backup for Site A goes to Site B and visa versa, but i want something better. Yes, I  could have a scheduled task to copy them elsewhere. Any other thoughts / suggestions. TIA 

We are using Veeam Backup & Replication(V12)  to take backup of Virtual Machines with Application-aware processing.Some of the virtual machines have SQL Server Databases.We take backup to Disk and Tape.Is it possible to restore SQL Server Database directly from Tape?If yesIs it possible to restore to different virtual machine? 

We have initiated vm instant recovery and migrated to production . The issue is that we have completed the Migration from vCenter instead of the Veeam console, we just wanted to confirm that we are able to hit stop publishing in the Veeam console without impacting the restored and migrated VM.Please advise.

A little while ago we purchased an additional SAS storage enclosure for our existing Linux Hardened Repository server. Due to the number of disks, and also because we only have a Host Bus Adaptor rather than a hardware RAID card, we attempted to set this up as 5 md-raid6 arrays of 12 drives each, combined into a single volume using LVM.While initially this seemed to be working, after a little bit we have been getting tons of I/O errors. We exhausted all possible troubleshooting steps in collaboration with Veeam support, but it just seems like this is a wrong setup for a Veeam repository.I recently discovered the concept of “XFS on ZFS”, i.e. the idea of being able to set up a ZFS ZPOOL - which would replace the md-raid and LVM parts mentioned above - and then format this with the XFS filesystem. Apparently this is not a new idea either, as I found it was mentioned briefly in a Veeam webinar at https://www.veeam.com/resources/videos/build-secure-repositories-17144.html?rwty.Does anyone

Hi, I notice that when I backup the same machine with different jobs (each job contains the same machine) via Agent that B&R stores the backup copies under different directories and hence multiple copies of that machines backup up are saved.  Is there a way to get around this so only one copy is saved? Thanks

Hi all … greetingsI am deployed an Ubuntu Immutable Repo and its utilization is high. Meanwhile I have a spare QNAP NAS TVS-h1688X, I am thinking if I can use it to expand the immutable repo capacity.Having checked the spec, the QNAP NAS support iSCSI and CIFS, might I use either protocol connect to the Immutable Repo for expansion? Will the immutability maintained because it is controlled at the OS level? Alternatively, leverage of QuObjects make the NAS become S3 compatible storage connecting to the VM host, and add both storage into SOBR, is workable too?

Hello Team,I’m receiving error trying to update from K10 7.0.7 to 7.0.8. Environment k8s and the storage CSI used is Longhorn.The StorageClass is already true to allowExpansion.So anyone can help?

Please assist with errorProcessing  Error: Unhandled exception was thrown during licensing process    

Need some clarification. On this scenario i have a windows server that run an app and i want to backup the whole server (in case we ever need to restore it i can just dump it on a vm) but i want to make this whole backup daily and immutable. For what i understand there is a set number of days for immutability but not sure how does this work for daily backups.  Whats the correct settings to do on this case?  Are these backups like whole backup every day or its incremental only? Thanks.

Hey,I have configured Linux Rocky 8.10 with kernel 4.18.0-533.16.1.e18_10.x86_64 to the Hardened Repo. However, I encountered an issue when trying to add this server to Veeam. The problem is with the Installer Service, and I receive either an exit code 1 or a timeout when connecting to Rocky via SSH. I have already turned off all firewalls and allowed all traffic. My question is whether version 8.10 is supported.I can connect to the repository via SSH using the command line from Veeam server. Veeam version 12.2.0.334 Here gave info that Rocky 8  is supported..https://helpcenter.veeam.com/docs/backup/vsphere/hardened_repository_limitations.html?ver=120

I asked this in the Veeam forums, I figure I ask here as well: I have Veeam B&R server1, with a SOBR repo, the capacity extend going to Azure. i have a Veeam B&R server 2, with a SOBR repo, with the capacity tier going to Wasabi.What is the best way of getting the backups going to Azure on Veeam server 1 to Wasabi on Veeam server 2? Goal is to eventually decommission server 1.I can recreate the backup and backup copy jobs on server 2, so then point forward, it will use Wasabi. But how will I get the existing historical backups in Azure on server 1 to Wasabi on Veeam server 2?

GuysI am migrating my VMs from an old cluster to a new one. NO problem so far - 7 out of 8 VMs moved. Veeam continues to back them up. Great stuff.The last one has a large VHDX drive - 4TbWhat will happen when the backup job tries to back that up whilst Hyper-V manager is moving the machine? With the old (1Gb) NICs in the source cluster this might take a while to copy (7h ish).Does the backup job just fail (becasue the machine won’t quiesce, or perhaps because there is already a snapshot created by the move process) or will it get stuck in some horrible sort of a loop and eat up all the storage on the cluster with checkpoint files?I ask because, back in the day (when I was new to Veeam), I did try to backup a machine that was the target of DFS-R and the results weren’t pretty. I realise this is a different scenario but I just want to be sure! B.  

When creating the pve worker using a static IP, it fails saying i don’t have a valid DNS server, but it’s nowhere to be configured. Also, we use tagged vlans on the vmbrX interfaces, and it’s nowhere to be configured from veeam... 

Hi,after backuping ubuntu ever since without problems, the first fresh installed ubuntu 22.04 came up with this warning message in our latest veeam b&r 11: Failed to index guest file system. mlocate was not found.   As since ubuntu 22.04 the package mlocate is just a transitional package to plocate, there is no mlocate binary.So I did a ln -s plocate mlocate  and expected the message to be gone - but it keeps reporting, that mlocate was not found. updatedb and locate do not show any errors:root@ubuntu2204:/var/log# updatedb -Vupdatedb (plocate) 1.1.15Copyright (C) 2007 Red Hat, Inc. All rights reserved.This software is distributed under the GPL v.2....root@ubuntu2204:/var/log# locate -Vplocate 1.1.15Copyright 2020 Steinar H. Gunderson...So whats to do now?

Good day team,Is there way to connect more than Veeam B&R server/software on different servers across both wan sites and/or locally? How can this be achieved?It is recommended that i install Veeam Enterprise Manager on the first server and/or site then start the  connecting. If so, is this free/does this require a license? Any other method?

Hello I recently installed k10 via helm by “helm install k10 kasten/k10 --namespace=kasten-io”as per documentation to access via load balancer I then upgraded:helm upgrade k10 kasten/k10 --namespace=kasten-io \ --reuse-values \ --set externalGateway.create=true \ --set auth.tokenAuth.enabled=true But still it just doesnt load gateway shows these logs 2024-09-11 09:05:09 diagd 3.9.1 [P38TThreadPoolExecutor-0_0] INFO: 92614743-2FC2-471D-8676-12B154066E1B: 127.0.0.1 "GET /metrics" 18ms 200 success2024-09-11 09:06:09 diagd 3.9.1 [P38TThreadPoolExecutor-0_0] INFO: CEFD4281-DBC4-4C05-8463-852F92557FB9: 127.0.0.1 "GET /metrics" 15ms 200 success2024-09-11 09:07:09 diagd 3.9.1 [P38TThreadPoolExecutor-0_0] INFO: 507BD583-608E-43E9-8AB7-FD9E4D708B87: 127.0.0.1 "GET /metrics" 17ms 200 success

I am getting the error shown in the image. UAC is disabled. I can connect via IP, but I cannot connect via machine name. Can anyone help? Thank you.

Hi to all,I need to rename the Veeam Enterprise Server hostname that has already been joined to the AD domain.In the past, on version 11, with the change of ip and hostname I had several problems, do you know if they were fixed in the latest version?Thank youFederico   

Hi alltogether,a customer of mine is planning a NetApp solution running NetApp Synchronous SnapMirror as DR / HA solution. I know it is offically not supported stated in the documentation.But is only the snapmirror to the secondary system and restore from second system not possible? Or is the backup from primary storage snapshot and snapshot creation possible within NetApp Synchronous Mirror? Thanks, Dennis

Hello,Can you add a feature to generate a pop-up on remote Veeam consoles to warn the user of an upcoming action on the server (update, reboot...)?Thanks in advance,

Buenas noches,Bloqueado "OK" para guardar la modificación o configuración del ProxyLuego de hacer instalado el Veeam ONE en Windows Server 2022 no puedo modificar la configuración del Proxy de Windows (inetcpl.cpl), al dar CLIC en “OK” no lo acepta, así que no me permite asignar el proxy para poder actualizar la huella del Antimalware.Ya revise la políticas locales y no tengo ninguna para las opciones de Internet.Puedo agrégalo de forma manual a nivel de registro de Windows y puedo navegar, pero sin embargo, sigue fallando la actualización de la huella del Antimalware.Por favor, alguien me puede ayudarSaludos y gracias de antemano,--------------------------------Good evening,After installing Veeam ONE on Windows Server 2022 I cannot modify the Windows Proxy settings (inetcpl.cpl), when I click on “OK” it does not accept it, so it does not allow me to assign the proxy to be able to update the Antimalware footprint.I have already checked the local policies and I do not have any for the I

Hi Community.  I have an Azure storage account I am no longer using as a repository for VBAz policies.  I was going to delete the account until I noticed there are three containers named “veeamdeployer<random>”, and each container contains the same 3 files: veeamDeploymentdll.dll, veeamDeploymentSvc.exe, and veeamNetworkRedirector.exe.  Does anyone know if these containers and files are needed now that I’m well beyond deployment into Azure?  Thank you.

Hi, has anyone configured the Oracle plugin/RMAN file, so that one copy is made locally and then it is sent to the Veeam repository using the plugin? Is this possible or if I want to have a copy in two locations (local and Veeam) do I have to use, for example, the Linux Agent and copy the folder with the copy made by RMAN?

Hello I setup the policies for backup job and it created snapshots successfully but failed at export operation with errors  Looking at the volume pod error which is trying to create, it shows  0/5 nodes are available: pod has unbound immediate PersistentVolumeClaims. preemption: 0/5 nodes are available: 5 Preemption is not helpful for scheduling.AttachVolume.Attach failed for volume "kio-57c7a59970eb11ef8059e2b67c8c8805-0" : rpc error: code = Internal desc = failed to attach disk: "bbdf69b2-e841-493c-b015-b6d86a530292" with node: "423e15a9-8fjd-45d9-df64-64208ca72806" err failed to attach cns volume: "bbdf69b2-e841-493c-b015-b6d86a530292" to node vm: "VirtualMachine:vm-93261 [VirtualCenterHost: iu-op-vcsa01.abc.com, UUID: 423e14a9-8fed-45d9-df64-34208ca02806, Datacenter: Datacenter [Datacenter: Datacenter:datacenter-7, VirtualCenterHost: iu-op-vcsa01.abc.com]]". fault: "(*types.LocalizedMethodFault)(0xc001211f20)({\n DynamicData: (types.DynamicData) {\n },\n Fault: (types.CnsFault) {\n

Hi,I have upgraded Veeam backup and Replication from V12.0 to V12.2.When I logon to console it ask me to upgrade Veeam VSS Hardware snapshot provider.If I try to upgreade it give me this error:Product: Veeam VSS Hardware Provider -- Minimum supported OS version for Veeam VSS Hardware Provider is Microsoft Server 2012 (64-bit only). How can I resolve this issue? thanksFabio