Discussion Boards

Hello,it would be great to be able to limit for physical machines veeam agent backup not only for “disallow VPN” and certain SSIDs, but also by defining an allow list for IP ranges: Some sites have a slow S2S VPN connection, there no agent backups shall happen. Just for the sites with fast S2S VPNS. Examples:Main site = 10.28.0.0/16 (allow)fast satelite site = 192.168.10.0/24 (allow)fast satelite site = 192.168.55.0/24 (allow)slow satelite site = 192.168.99.0/24 (disallow)…. TIA, Rudi Stang

Hi there,I recently created a new email address and I’m in the process of switching all accounts to this new email address. On the Veeam website, it is, unfortunately, not possible to change the email address, but I had to create a new account instead. It wasn’t a big tragedy because it is (was) my private email address anyway.I just wanted to register here on the Veeam Community again with that new email address (because it’s using the same account as on the Veeam website). But registering a new account wasn’t possible because my username was already taken (sure, because I took it back in the days).I also can’t change the username on my “old” Community profile.Can someone assist me in either changing the username on the “old” profile or deleting the “old” profile?Many thanks!Best regards,KarlvExpert, former Veeam VanguardOld email: webmaster@kawi.chNew email: karl@widmers.me 

We have begun our 30-day trial, going very well. Except we have no servers (all in the cloud) and need to assign an IP address to a Windows 11 PC which will serve as our Backup PC.Would like to hear from others who have been through this - how did you make that backup server addressable to create a restore portal? Can we somehow use one of our spare domains from Microsoft 365? We’ve been wracking our brains with little to no technical support and I think the question is best addressed in a group such as this. Any ideas?

I cannot find it. It may be very old or a ghost one.  What is the easy way to figure out the “in using an object” from the VBR Management console or PowerShell? Or is there any way to force delete the credentils? 

Hello,I‘m very frustrated now. Had Community for years in use without any problems. Yesterday I could not open management console and get an error message. I try to reinstall software but get this error. Tried an installation on new W2022 same error. Search google - no success. Tried to solve this problem 8 hour. Now I‘m at the end of my knowlegde.  

Hi every body,Please i need help to add hyper-v2019 on veeam B&R11 installed in windows server 2016 standard virtual machine. When i add the host hyper-v2019 i have the error bellow :“Failed to connect to host Access denied or timeout expired.Check if you have local administrator privileges on computer .Possible reasons:Invalid credentials.Specified host is not a Hyper-V server. (System.Exception)”But i add hyper-v2016 on the same veeam B&R11 successfully.the account i use in veeam is added in the hyper-v 2019 host local administrator groupFile and printing share is active and authorized in windows firewall in the hyper-v 2019 host. i can open the folder \\hyper-v 2019 host\c$ successfully on the virtual machine in which veeam B&R11 is installed.Thanks

Hi, I have not been inside Veeam for a while. I am getting errors as in the snapshot below:I understand it is complaining about storage space for backups but I am trying to zero in on what to attack first here. The one that interests me is “Unable to apply retention policy: failed to delete backup files error…...is locked by running session xxx-xxx [Instant recovery]. Is Veeam just too busy to start the backup because it could not apply retention policy? Not sure which item to investigate first...ar

By now i’m using “Veeam Backup & Rep” in the free community edition - for testing some things an maybe buying a commercial license in future. The problem is, that “File Copy Jobs” (not Backup Copy) are very very slow.For Example i have to Copy an ammount of single (168.000) files with about 180 GB together to a local target disk. If i use the integrated windows copy feature these Files are copied within about 4 or 5 hours. The FILE COPY Job from Veeam runs for 25 HOURS (by now) and shows a state of 32% ready. What could be the issue for this long duration? The source and target are the same. thanks in advanceG.Huber

Hi All,As I checked the release notes for the Veeam Agent for Linux that supported most of Oracle Linux 8 versions but when I tried to install the agent I’ve got this error below :2/18/2024 3:24:09 PM Failed [172.17.2.207] Failed to install veeam-6.1.0.1498-1.el8.x86_64.rpm, veeam-libs-6.1.0.1498-1.x86_64.rpm and veeamsnap-6.1.0.1498-1.noarch.rpm packages: error: open of kernel-uek-devel-5.15.0-3.60.5.1.el8uek.x86_64 failed: No such file or directory Failed to invoke rpc command  0:08:012/18/2024 3:32:10 PM Failed [172.17.2.207] Failed to install Veeam Agent for Linux: error: open of kernel-uek-devel-5.15.0-3.60.5.1.el8uek.x86_64 failed: No such file or directory Failed to invoke rpc command  Can somebody let me know why I’ve got this as what I am looking for is using Oracle RMAN backup via Veeam Backup and Replication using Agent and Oracle Plugin Appreciate your help Thanks

I created a “VeeamRecoveryMedia.iso” with Veeam Agent Free for Windows v6.1.0.349,and copied it to my “Ventoy” ssd external usb case. I have a bug in UEFI mode: unable to press any key when prompted, and finally fall backs to the Ventoy menu.(Boots fine in BIOS mode but useless cause of legacy BIOS boot with GPT image to recover) What to do ?

I had to restore the server that Veeam was on to a snapshot and now I cannot get Veeam to run the daily backup job. If I rescan repositories, it will sit forever and do nothing. Is there another way around this to get backups going again? Thank you!

Any can help me about below error2/27/2024 11:54:02 PM :: Error: Could not find file 'D:\TEMP\tmpD1CF.tmp'.   

Hello,I have a problem with configuring the Backup Job.We have one server hosted on Hetzner and I need to backup it just once and restore it.I don’t know what could be the prerequisites for this, do I need to expose our VBR ports to the Hetzner?Currently I manage to create protection group, added Hetzner server without any problems, rescaning is working, but when I try to create a backup job using Veeam agent it fails with the following error message:3/4/2024 14:03:40 :: Failed to send backup job configuration to X Error: Failed to update backup job Managed by agent job name: Agent Backup Policy 3.Invalid job configuration.Connection problems.Exception has been thrown by the target of an invocation.Failed to establish connection: no valid IP addresses were found.A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond VBR IP Addres:10005   

Hello, I need some advise if the VMDK ID is changed and Veeam is not able to find those VM anymore. Recently had to rebuild the host and add VM from the datastore, however their VMDK ID has been changed. Veeam is not longer detecting those VMs. I tired remapping the VM, however, its not continuing on previous chain and creating new restore point.Any advise if we can do anything about it? 

HelloHow to protect AHV VM with vTPM enabled?

Veeam Agent backup failure due to VSS error. When checked in Event logs, found an error for VSS “automatically choosing a diff-area volume processing endpreparesnapshots”. Has anybody worked on this without rebooting the server?

Hi, I vaguely recall seeing an option where a backup job is automatically started when a USB drive containing a backup repository is plugged into the server.  I can’t seem to find it again…was I dreaming?Thanks, Hammer

hi veeam ommunityGuidelines for responding to ransomware. Does anyone have instructions on what to do if, for example, one of the servers is infected with ransomware? I mean the actions related to veeam backup. I want to write an instruction and I want to use the experience of you experts. 

We relocated one of our VMs to another backup job and noticed that the job completion status information for the VM is “Resetting CBT per job settings for active fulls”. Our backup jobs are configured with incremental backups and one synthetic full backup per week.  I am curious if we move one of the VMs to another backup job, does Veeam automatically perform an active full on it? Thanks Pete  

Running Veeam v12 and currently backing up for 14 days to a local HPE storeonce.I want to also put a longer term copy into an AWS S3 bucket for about 1 year. Probably once a month.The best option I think is to perform a backup copy, not via a SOBR.If via copy is there a compatibility issue creating a copy job from storeonce catalyst repos to S3 repos? thoughts?

So we are deploying Veeam for ourselves and I have been fighting with it for a few days.  Our setup is: Veeam server - Non-Domain joinedVeeam Proxy - Linux with XFS volume attached via RDM in VMwareA scale out Repo setup that is backed by the xfs volume from the Linux machineOur primary Altera arrays are also added into Veeam under the storage Infrastructure and i am able to browse the snapshots on them and perform restores. Both servers are located in the same site/network.  The storage is coming from a LUN on an Altera Hybrid array that is presented to both hosts in the esxi cluster.We have a mix of domain joined, non-domain joined windows machines along with some random Linux boxes.  I just have a simple nightly backup job created that has all of our servers included in it.  I have selected the Linux proxy for the backup proxy in the job which then pulls in the Scale-out Backup Repo.  In the advanced settings everything is default with the exception of changing the compression level

Hello all,I'm just curious about license and how it counted. We bought already license Veeam B&R.I would like to confirm if no additional license is required cause I'm bit confused.Is my license sufficient for this needs? Those file shares are also included?My license edition is: Enterprise Plusthanks,Ladislav.

Hello,I have an environment where I have a domain controller, a domain joined server with a sql server installed. I want to install veeam backup & replication on another server 2022. Do I need to join the veeam server to the domain?Best regards

Hello,Getting the following error when trying to run SureBackup in Veeam which is on a windows server 2019.“Error: VM was created with the later version of Hyper-V than the one installed on host.”The VM’s are configured with version 10 and they are on server 2022. Server 2019 supports only until configuration 9.0.Is there any way to run the surebackup for VM’s with configuration version 10.0 on this host? Thank you.

I learned a lot during the last few weeks about Veeam and I am kind of exited about this software. I resolved almost all problems, but there is still one issue I cant get a grip on. Ich have several backup jobs in a chain. No parallel Jobs. I have a lightning fast proxy (Veeam suggests a maximum of 24 parallel jobs).My persisting promlem is, that jobs get stuck absolutly randomly. Sure, after hours the stuck job fails, goes into retry1 and finishes successfull. But thats not satisfying… Is there anything I missed about jobs getting stuck? Just for your information: Jobs launch and run. They get stuck somewhere after 20%, 50% or 90%. So abolutly random… I recognized that the “veeam backup service” gets completly frozen. This service cant be stopped by anything else than a server restart.