Discussion Boards

Hi, all. I have question about how to perform large backups on a slow network. My current infrastructure is : headquarters and the IDC where the physical servers(119 TB) are located are more than 100km apart, connected by a 1Gbps network. (This network is for business, and I don't have any plans to set up a backup network yet.) Initially, I wanted to have the backup server and repository server at headquarters so that I don't mind if the initial full backup takes a long time, but if I need to recovery backups, it will take too long. (Single largest server is over 7TB). The second way I thought of is to install the backup server and repository server in IDC and make a backup copy to HQ.However, the backup copy is also downloaded at 1Gbps, so I think the business network will be disrupted on the day of copying the full backup data. How would be the best way to configure it in my situation?Will the 'WAN Accelerator' feature help?Also, does this work on a local network? I need your advice.

Hey guys,I tried to install I/O filters on vCenter for CDP and it showing the error “ the operation is not allowed in current state” . Can anyone tell why it is showing like this and suggest what needs to be done. Please refer the screenshot for more details. 

Hi, I’m trying to understand SB mainly the networking side of things. In short I want to be able to ulitise SB as a sandbox to spin up a SQL server, however only spin up the OS of the SQL server - I then want to test attaching the databse to this SQL OS to see how it would perform in a reallife DR scenario. So I need to ensure that it is fully isolated from the existing environment but then I would like the SB VM to be accessible from an RDP session if possible but then to see network shares so we can attach the DB. Any ideas if this is possible and could someone maybe give me some information on the following as there really isn’t much learning material out there to understand this:  

Hello All, I am trying to backup a windows 10 pc and and restore it on a different machine so I have a backup PC ready to rock if something happens to the current one, the first PC has the windows files etc on a 1TB SSD but it only has 100GB used on it and I want to restore that onto the new PC but only onto a 256GB SSD so I don’t have wasted space, but in doing the back up the veeam software backs up the whole 1TB drive and when trying to install on the new 256GB SSD I get a VDS storage error and it doesn’t restore. 

Good day team,I created a test job of an oracle linux server(database server), job appeared in the job listing, ran 2 job tests, both failed with errors:I had the wrong credentials first, so i thought that was the problem, I now found the correct credentials, managed to successfuly connect to my oracle linux server using correct credentials using a non standard ssh port. I was adding the server under backup infrastructure->mananged servers, entered correct ssh creds, reached the review page to install the Installer and Transport service( so clearly the linux login creds are correct). Concerns:My boss said to HALT on installing these 2 required services on this DB server as he does not want any services impact or catastrophe lol, he is new to veeam. For me lol, i am very cautious as well, i dont want to any overtime because of any unforseen issues Would the absence of these 2 services have caused the errors above, will backups work if these are installed? Is it safe to install (thoug

Is this possible and if so, how is it done in Veeam?

I have already enter the password in Manage server but that did not resolve the issue

Hi everyone, i have a question but let me explain the situation first:We have some tens of hetzner cloud servers for our customers for which we provide a secondary backup with Veeam agent on a s3 share that you can reach via SMB, apart from the one that comes integrated with hetzner.Each server has its own public IP and his own local subnet.We would like so know if there is a way to manange all these backups in a centralized way.We also have our own Veeam B&R server we use to manage our own on premises vmware infrastructure, (4 sites, one of which is a cloud esxi all with their own local nas and veeam proxy servers).I saw you can creare an s3 repository on veeam B&R but i don't know if there is a way to manage all the veeam agents via protection group over the internet, ergo over public ip? Is it possible? We have firewalls so we could limit the connection to a specific public IP if we wanted to. Do we just have to open some ports and that's it?Another question: can we create o

Hello. Used VEEAM 12.2.0.334 Veeam Cloud Virtual Machine Using agents for Windows operating systems, I copy and backup data. Virtual machines on Linux can recover granular files. When trying to restore Windows files, an error occurs when mounting FLR browser.Veeam is installed on a Windows 2019 server, reduplication is enabled on it. Using the agent, I make AD backups and can restore files.  But if I do exactly the same task on a friend’s virtual machine, changing only the virtual machine that I want to copy, I can’t restore the files.  It turns out to do instance recovery and extract data from the running VM.But when copying, exchange does not allow you to restore letters. If I backup only drive C, then I can restore the files of the Windows guest operating system.  Although the tasks are completed without errors.  It turns out that the backup browser works very selectively. Maybe because some virtual machines have a server core?

 When I create a backup job and enable GFS retention, are the GFS backups automatically included in the secondary backup Copy jobs or do I need to configure GFS retention separately for the secondary Backup Copy jobs?

Backup Jobs not doing Storage Snapshot using vSAN.We have a VBR in Azure (AVS). The VMs are on volumes in vSAN. So the backup job finishes successfully. However, instead of doing a storage snapshot, the job does hot-add. The job has been configured to use storage snapshot. Since the VM snapshot is not removed right away, consolidation takes longer which affect the application running on the servers.   

Hi!We have a Hypervisor server running Windows server 2016. On this we have veeam backup and replication. We had multiple electric outages. UPS damaged and the server received multiple power outages. Fortunately it started, but Veeam does not. It has sql server, but its service with automatic delayed start but is not starting. To manual start still nothing. Event log saying: “the log scan number (5815:437:1) passed to log scan in database ‘master’ is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, recreate the publication. Otherwise, restore from backup if the problem results in a fuilure during startup.”Seems to me the database damaged. What can I do to fix this? Fix would be preferred if fails how can i create new database to start creating new backups?Thank youPeter

Hi,I have a NAS which is supposed to be offline and switched off most of the time and which will be brought up only for rare occasions to save a monthly manual backup i.e.. It is attached to my vSphere/Windows Server/Veeam VBR-setup.I have played around with my normal steps like I normally attach repositories to Veeam, but due to the NAS being offline most of the time there are too many things any involved component may and will stumble about (Windows Server missing a disk while booting, Windows Server freezing when NAS shuts down etc.).What would be a promising approach to make the storage available to Veeam without having all the red warning lights?RegardsKarl

I am not seeing any option to export the jobs. Am I missing something here? I dont want to use Configuration backup option just to export job configuration. There has to be a simple way to export the jobs or an enhancement should be raised to include this in future releases.  

Hello,We have an issue on some Veeam backup server, some jobs do not do the synthetic backup and here we will have an excess on the number of restore points set by veeam job.We need to get alert on job who’s exceeds a number of restore points.Need help 

If the Veeam Management Agent for a client is removed (stop managing) from the SPC, the option should be present for the Management Agent to first uninstall the Windows Backup Agent and delete all configuration from disk first (full cleanup for customer leaving). At present the Management Agent is removed but the associated Veeam Windows Backup Agent is left behind, orphaned (and in the case of a locked UI, inaccessible to the user) and then requires manual uninstallation.

Are full backups always created during daily tape jobs, or does it depend on the specific backup configuration?

Today Veeam updated the VB365 v8 page with an update to a new patch version - 8.0.3.1044 - KB4656: Release Information for Veeam Backup for Microsoft 365 8 Cumulative PatchesI downloaded and tried to run the installer and received the following error, so wanted to know if anyone else has tried this latest ISO?  I am not in Production just yet with this so just working through updating and have opened a case with Veeam too.If anyone has got this and fixed it let me know.  I will post back once Support gets back to me.

I have recently seen many people posting about issues with jobs, etc. and then some of the error messages they are seeing.  If you want to analyze the Veeam logs to see if you can troubleshoot the issue yourself you can follow the attached PPT file which is a Log Diving session from 2017.  It is a great resource and shows you where and what to look for in the logs with examples too.Log Files are located here - C:\ProgramData\VeeamThis is where you will find the logs for the respective jobs.  Like backup jobs are located in the “Backup” folder then broken down in to subfolders by job name.Hopefully this helps people when it comes to troubleshooting job failures as I have used this PPT file many times to help me prior to calling Support. 

Hi all…If I have 3 sites each have individual VBR serve, Veeam console and own repo.They are managed by 3 different departments staff.And there is a DR site only has 1 physical server and repo , which save some critical VMs for the 3 production sites.To increase the SLA, can I deploy CDP and VDRO for this 3-to-1 environment?First thing is need to virtualize the server on DR site?   

Adding hyper v host fails with "invalid credentials" or "spedified host is not a hyper v server"

 I have a question about backup job configuration when using S3 repository with immuability enabled.In the job retention if I set only 14 days without GFS, it means Forever incremental mode for me.If I click next I don’t have any error or warning to enable GFS like I could have with a Hardened repository.I remember on object, we only copy new blocks not files. Once immutability expires, unused/expires blocks are just deleted, but it’s not really clear for me.More intrigant Veeam is in capacity to “Merge” the files … and apply the retention ...The immutability works if I tried to delete the files 

Hello,have a Veeam B&R   Kasten / K-10       phases: - attempt: 3 endTime: 2024-10-11T05:27:03Z errors: - cause: '{"cause":{"cause":{"cause":{"cause":{"file":"github.com/kanisterio/kanister@v0.0.0-20241002234128-99368fcea567/pkg/kube/snapshot/snapshot_alpha.go","function":"github.com/kanisterio/kanister/pkg/kube/snapshot.GetSnapshotClassbyAnnotation","linenumber":489,"message":"Failed to find any VolumeSnapshotClass in the cluster"},"file":"kasten.io/k10/kio/exec/phases/backup/snapshot_precheck.go:108","function":"kasten.io/k10/kio/exec/phases/backup.runCSIPrechecks","linenumber":108,"message":"Failed to get K10 VolumeSnapshotClass"},"fields":[{"name":"PVC","value":"data-my-release-mariadb-0"}],"file":"kasten.io/k10/kio/exec/phases/backup/snapshot_precheck.go:90","function":"kasten.io/k10/kio/exec/phases/backup.isCSIPVC","linenumber":90,"message":"Failed to run CSI prechecks for PVC"},"file":"kasten.io/k10/kio/exec/p

Hi,using OpenShift 4.16.14 with Veeam Kasten free 7.0.9.Need to connect to Veeam BR 12.2.0.334But if I fill out the form add Profile at Kasten DashboardSettings → Kasten DR Setup got no saved profile nothing happen when click    What did I wrong ?

My organization uses VMWare ESXi to manage all of our virtual machines.  We do not have the correct license to be able to do simple “copy” backups of our virtual machines (according to the error messages that I get when I attempt those).  We are having to run backups from the VEEAM agents, but, the last time that I had an issue and needed to restore, it was a pain in the a$$.  I’m assuming that this is because of the way that we are using the agents, but I really don’t know any better way.Would it be possible for someone to point me to or help me out with a step-by-step for the best practices for backing up our virtual machines?  How should my VM hard drives be set up to allow for the quickest possible backup/restore?