Community

Sorry if this appears twice. I thought I had created the question, but cannot find it.Veeam backup&restore has an application config file that is protected by a password.How to I test this password? I do have something written but I want to prove it is correct.I’m hoping to do this without installing a new copy of the applicationMany thanks

I swear I’ve seen some posts about this but can’t find them.  I haven’t dipped into the Linux Hardened repo’s with immutability yet, but one of my engineers recently set one up for a client, but as a copy repository.  I’m putting together a proposal to replace our internal Synology NAS that is our primary repository with a Dell PowerEdge R550 with a fair amount of local space (8x 8TB disks in RAID 5 or 6) connected via 10Gb or 25Gb links. Backup data is currently copied to a SOBR at a remote site that is using a Synology NAS and Wasabi for immutable object storage.  Right now the primary site is keeping 30 days of Forward Incrementals with Active Full’s with no GFS retention, but I plan to ramp up some more retention locally at some point as I ran into space issues a few months back and ended up doing all of my GFS work on the copy repo at the remote site for the time being.Any gotcha’s I should be looking out for this sort of configuration - primarily in regard to using a hardened box

This is part three of the blogpost. If you want to read it from the beginning, head here: SOBR Archive Tier – Explained and Configured – Part 1 of 4 | Veeam Community Resource HubIn this part 3 of 4, I will walk you through all the things to set up for the archive tier in Azure. How to setup the archive tier for your SOBR in Microsoft AzureLet’s assume we already have a SOBR using a capacity tier to offload data to Azure in a specific schema. Could be either copy or move or even a combination of both to fulfill the 3-2-1 rule. A nice walkthrough of the capacity tier setup could be found e.g. here: https://jorgedelacruz.uk/2019/05/14/veeam-cloud-tier-capacity-tier-in-microsoft-azure-blob-how-to-configure-a-veeam-backup-replication-scale-out-backup-repository/This would be our starting point to enable another shift of the already offloaded data into the cheaper archive tier.Therefore, first of all we have to define another storage account in the correct tier level. In our example for Azu

Email notification is working but I was recivinig somthing like chines letters and i try to fix it with dis article KB2692: Notification emails from Veeam Backup for Microsoft 365 are sent in an unexpected language , and now test mail is working and whan the backup job is finished Veeam Backup for Microsoft 365 in action many said that email notification is sent, but I dont recive any emails.Help ?

Because we had already the option to backup files directly to tape, it was already possible to backup file shares to tape without backing it up to disk before. But this was limited at least to performance. This will be be much better in v12.Another limitation was that it was not possible to copy a NAS backup to tape. This will be available in v12.At least in v12 beta media pools are limited to Standard media Pools and WORM Media Pools.

Recently I had to troubleshoot an error in Veeam Backup and Replication. Error appeared at File Level Restore operations. In detail: restore Windows files from a Veeam Hardened Repository.Environment consists of existing and freshly installed proxies and repositories servers. New repository servers were Windows and Linux as hardened repository (LHR). Mount server was a physical Windows server.Problem that occurredWhen we tried to restore files from LHR we get errors like these:   We also could see that mounting of the restore point worked for a few moments. Restore Explorer also showed first directories. After a few seconds, mount point was disconnected automatically and browsing in Explorer resulted in an error.After some tests we found out, this only happens when we were using newly installed proxies as mount servers. It worked fine with already running proxies and even with new Windows repository server.That was solved the problemWhen we were checking the configuration of new proxy

Hi all,Our setup is currently as follow: Veeam server in seperated VLAN, guest processing is now running with VIX with the domain\administrator account.Regarding the KB we must use the administrator account as it has the -500 at the end of the SID.For safety purpose we want to disable the global domain\administrator account and use another domain admin. Since I change the account, the backup jobs failing because of failing guest processing.When I test the guest processing, the difference is that administrator successfully can make connection with Guest OS via VIX (after failing over to backup server for guest interaction). Another account fails at this step as well.I could open 445 between the VLANS’, but I’m not sure that I break security if I do so.Are there best practise available for this kind of setup? Disabling UAC would not be the best option for us :).Thank you!

hi there, the last couple weeks i face a weird issue which i will describe below.i have Veeam B&R installed on a physical domain joined server 2012 r2. up to now i was able to add all other servers in the infrastructure (one more physical server 2012 r2, some VM servers 2012 r2 and a Azure file server 2019) without any issue.even a remote non domain joined server over a VPN connection.my issue is that i cannot add a non domain joined physical 2022 server located on a remote site which we have VPN connectivity, as a standalone server. need to add it as we are going to have a VN running there.please see attached, thank you in advance for your assistance.ps: i can ping the server and credentials are tested and working just fine since i can connect to that server using RDM

I have a lot of users that require a location accessible to everyone to share files on a temporary basis. (non confidential type info) My issue is that nobody likes to delete anything here… EVER! After having to clean it out multiple times I figured I’d run a scheduled task for a PowerShell script to clean the folder out on the first of every month.  The issue is now people wondering why the files were deleted event though it was explained and called Temporary_Data_Transfer. lol I created a folder titled  “_Instructions” at the top that won’t be removed by the script and the underscore keeps it at the top.  There is a document in it so users can review the date the folder is cleaned out and states that files will be deleted monthly. This has really helped clear things up with people not knowing their files will be removed. The script omits clean up of that folder by increasing the date to make it appear as a new file.  The also script keeps a log of deleted files so when someone is ask

Happy Friday everyone, Interested to see people’s opinions on this subject. RAID for backup storage, most (I really hope all) organisations will use RAID for the storage underlying their backups. But, what type of RAID do you typically use, and why? Vote in the poll and then share any particulars below. For example, if you use RAID 60, but choose to have 4x stripes vs 2. I want to add, there are no right or wrong answers (even you RAID 0/ No RAID brave people!), but there’s always a reason behind the decision, were you after maximum density, improved write vs read, maximum durability, reduced durability due to multiple copies etc.

I am currently using Veeam EssentialsOur HCI is Nutanix and we have roughly about 28 VM’s on itWe are currently evaluating Proxmox VEHow can i restore full Backups of my critical VM’s to the Proxmox VE? 

This weekend happens an Issue on a Copy Job on immutable repository:XX/XX/XXXX 01:02:07 :: Agent: Failed to process method {Transform.CompileFIB}: Input/output errorPOSIX: Seek operation has failed. File: [/XXXX/backups/BACKUP_COPY_JOB_XXXX/BACKUP_JOB_XXXX/BACKUP_JOB_XXXX.vbk]. Distance to move: [504738922496]. Move method: [SEEK_SET]. XX/XX/XXXX 01:09:00 :: Unable to apply retention policy: failed to delete backup files Error: Input/output errorFailed to get file system object info: '/XXXX/backups/BACKUP_COPY_JOB_XXXX/BACKUP_JOB_XXXX/'Agent failed to process method {FileSystem.Exists}. Now I see the repository as Unavailable and if I try to rescan it and I receive the following warnings:Failed to synchronize REPOXXXX Details: Input/output error Failed to get file system object info: 'XXXX/backups'. Agent failed to process method [FileSystem.Exists].I can’t find any info about this specific issue. I’m investigating on repository system logs.Regards

We have a location in the US where our VBR server in DE seem to have some connection issues sometimes. Latency and packet loss I see in smokeping is not that high, even better than for most of our other remote locations. Still we see errors like below in out backup and offload jobs for 2-3 VMs out of 35 on a daily base. The IP is the local proxy there. Processing xxxx Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 172.31.132.113:2508   First job retry is successful most of the time. Anyhow, I’d like to get rid of those errors. Support suggested to change following regkeys to adjust.ConnectByIPsTimeoutSecAgentStartTimeoutSec But this did not change anything. I think we need settings for retries not timeouts. Any other ideas? Network team already checked everything and did not find anything. As I wrote, monitoring graphs also do not look too bad.

Hi,I have a problem with add an organization on veeam Back EM with API.I certainly enter correct “HostUid” that belong to vcloud, but get below error:"FirstChanceExceptionMessage": null,    "StackTrace": null,    "Message": "Unable to find target vCloud host on VBR [25fc543e-0622-4dce-82ff-ee6296bb397c]",    "StatusCode": 500,    "Status": "InternalServerError" Sent body as below:{  "OrganizationName": "Org-01",  "BackupServerUid": "urn:veeam:BackupServer:25fc543e-0622-4dce-82ff-ee6296bb397c",  "RepositoryUid": "urn:veeam:Repository:a3718da3-2b89-4646-a5d4-df6dada65d8e",  "QuotaGb": 100,  "RepositoryFriendlyName": "Backup Repository 1",   "JobSchedulerType": "Full",  "HighPriorityJob": false,  "HostUid": "urn:veeam:ManagedServer:425c2582-d46d-4316-9977-a3e5f49ec1f9" } P.S 1 : I can add it in web UI successfully.P.S 2 : All parameters that sent to veeam, taken from “Get” APIWould you please help me in this regards?

Hello, We’re trying to make a backup on a server using Agent but we’re facing this error message. 

I wanted to ask any Service Providers out there that may use tape with Veeam - do you have sizing set up so that when you have X number of Tenants you add tape drives or another tape server?I am working on our design for our Veeam VCC to Tape offering and I am trying to put together some rough estimations of when you have X number of tenants on VCC you add either - X number of tape drives more or add a second/third tape server to the mix.We have currently 47 tenants with one tape server which had 3 tape drives connected (now it is up to 6 as we added 3 more yesterday) but it still seems to be a bit of a headache due to the number of jobs running plus when a Restore request comes in.Hopefully someone has experience around this as I have also asked our SA at Veeam as well to see if there is any documentation, they have similar to the limit's spreadsheet for VBM365 which is great.Thank for looking and chiming in. 😁

IntroductionOne of the most notable upcoming Veeam Backup and Replication v12 capability is Direct to “Object Storage” backups.I thought it might come in handy to share a small AWS cli cheat sheet with the community. Initial AWS cli configurationThe first step is to run aws configureAll you need to provide are access key and secret key. You specify the --endpoint-url directly in the commands.Next, make sure you are using v4 signature aws configure set default.s3.signature_version s3v4 Creating a simple bucketaws s3api create-bucket --bucket <yourbucketname> --endpoint-url=<yourendpointurl> --no-verify-sslNote: You don’t necessarily need the --no-verify-ssl option except if like me you are lazy with certificates in your lab. Creating a bucket with object lockCheck out this great post from my colleague Steve Firmes where he discusses “How to avoid an Immutability Migraine”.The command is pretty straight forward:aws s3api create-bucket --bucket <yourbucketname> --object-

Morning, Saw an interesting news story today relating to some new HDDs from Seagate, boasting a maximum capacity of 18TB, these 7.2k RPM SATA/SAS hard drive, capable of a maximum sustained transfer rate of up to 554MBps. For those interested it is the Seagate Exos Mach.2. So how does it reach these alleged high speeds? Let’s dive in 👇 Firstly, these hard drives have two actuators, with the disk capacity divided neatly in half between them. As always, the random IOPS falls through the floor with these disks, achieving 304 random read and 560 random write IOPS, tested at 4K Q16.For the cache, it’s a 256MB multisegmented cache helping boost some of these numbers which isn’t that surprising. These hard drives are designed for the datacenter, so pricing isn’t publicly shared and I don’t believe we’ll see these drives on shelves any time soon, and with power consumption of up to 13.5w under load, these will certainly be contributing some heat when used in bulky RAID Arrays. Whilst this cert

Account lockout help keep user accounts secure by preventing unauthorised users etc., from guessing the username and password. When your account is locked, you will have to wait for a specified amount of time before being able to log into your account again. Here is the link to the original blogpost. In the past, it was recommended to disable the local Administrator account due to several known vulnerabilities such as the built-in administrator account cannot be locked out no matter how many failed logins it accrues, making it a prime target for brute-force attacks that attempt to guess passwords. This is no longer true as beginning October 11, 2022, or later Windows cumulative updates, a local policy will be available to enable local administrator account lockouts.  Brute force attacks are one of the prevalent ways Windows devices are attacked today. Previously, Windows devices did not allow local administrators to be locked out. This leads to scenarios where, without the proper netwo

A new feature in vSphere 7 is the ability to configure a VMkernel port used for backups in NBD (Network Block Device) respectively Network mode. This can be used to isolate backup traffic from other traffic types. Up to this release, there was no direct option to select VMkernel port for backup. In this post I  show how to isolate NBD backup traffic in vSphere.ConfigurationIt is quite simple to configure backup traffic isolation. With vSphere 7 there is a new service tag for Backup: vSphere Backup NFC. NFC stands for Network File Copy. By selecting this, vSphere will return the IP address of this port when the backup software asks for ESXi hosts address.So all you need to do is to add a new VMkernel port, enable Backup service and set IP and VLAN ID. Host does not need to be rebooted. Now NBD backup traffic will be routed through this port.   How does it look likeFor verification there are a few options. You can check log file or monitor ESXi network throughput. On my demo ESXi host, I

Hi Folks,It came to my mind long time ago this question, and my answer, but last night after chatting with a friend of mine, the topic came out to the table, so here it comes...What do you miss from your Veeam B&R?And my first answer would be, a Linux Based Appliance, getting rid of the Windows Based Installation at all.I've been "struggling" with this many times, usually people that doesn't want to have a Windows Machine (most of the time, they are full Linux / Unix Infra), or can’t afford a Windows Server License.What do you think? Best regards.Luis.

Hello,we want to change the naming of the media sets in our tape media pools and encountered a situation with the available variables.Our goal is to include date and time in the media set name in format ”yyyymmdd_hh:mm”The variable %date% gives date and time in the format “dd.mm.yyyy hh:mm” (ok, the date format is based on the system locale). But we cannot change the system locale for this…. 🙁With the variables %year%, %month%, %day% and %time% it should be possible to build a date_time string in the desired format. But unfortunately, the value of the %month% variable is the name of the month, not the numberDoes someone have an idea or a trick how to get the number of the month? Are the variables configurable? Just asking all the experts here before opening a support ticket. 😎 Documentation mentions nothing about this…https://helpcenter.veeam.com/archive/backup/90/vsphere/add_media_pool_set.html Please forget my question 😂😂😂You should look at the documentation for the correct vers

So in B&R v12 it is possible to directly backup to an object storage - same is valid for the agents if I’m not mistaken. Testing the current beta hasn’t given me that option to choose an object storage as target repository, so I guess it can only be achieved in combination with B&R? Or does it still have to be developed? Thanks!

Hi Everyone, Veeam Vanguard @mkevenaar has started a mastodon server masto.nu This should be a great place for Data Protection folks and It in general. I plan to push this also through my Kubernetes networks.Please feel free to join.