Discussion Boards

Hi everyone,I have a SureBackup issue and I’m trying to understand the IP selection behavior.SetupRepository server has two NICs:Management NIC 192.168.10.191 Has gateway Domain profile iSCSI NIC 172.16.100.11 No gateway No DNS Used only for iSCSI to Synology ProblemSureBackup fails with: Failed to connect to the endpoint [172.16.100.11:2500]Veeam is trying to connect to the iSCSI IP instead of the management IP.What I verified VBR can connect to 192.168.10.191:2500 → OK VBR cannot reach 172.16.100.11 → expected VeeamTransportSvc is running

I have a 7 node HyperV failover cluster and each host is running Windows server 2022. I have about 20 Red hat linux VMs in my cluster and added the cluster to my Veeam inventory. Most of the VMs added sucessfully with the cluster, but about 6 of them are added with all blank fields. There's no name, no node info and the host OS says unknown. When I try to add these VMs to a backup job in Veeam 12.3.2.3, they show the accurate disk capacity on the VM page, but when I run the job they all fail. I get an error about how Veeam failed to get the VHDX information.Many of the VMs had multiple HyperV checkpoints that were all deleted and merged. There was also an issue where our HyperV cluster had cluster traffic blocked on certain nodes in the past, which may have cause some Cluster synchronization/ownership permission.  Please advise on how to make Veeam able to read these VMs.  I understand this may be a more of a Microsoft issue, but any assistance is appreciated.  

My recent discovery so it could help someone not to loose time. And maybe if there is a solution I’ll be most thankful.So with Proxmox version 9 you need to set Machine type to version 9.2 instead of Default as it defaults to 10 and that causes Veeam backup to fail.  That will insure that your backup will be sucesful and restore will work too. I have issue, where I am migrating servers from Hyper-v to Proxmox and usual and most painless solution was to use Veeam Backup&Restore as intermediary as we are already using it.But in this case restore to proxmox fails as when VM is created is created with default version for machine type and this defaults to 10 and this results in: Failed to prepare disks for restore. (If anybody knows how to convince the process to default to 9.2 Mychine type I’

Hey guys,I’m installing a VM on our Synology NAS to act as a Veeam Hardened Repo. I already had it before but now doing it trough Infrastructure Appliance.When I start the installation I get’s stuck in this process: Any recommendations for it? 

After upgrading to Veeam 13 on Windows, I am unable to login with UI console. Access throw WEB conole works. 

Receiving error message “invalid system configuration detected”. Checked the logs under C:\ProgramData\Veeam\Setup\Temp\ but not finding anything. The logs end with Vmacheck upgrade.

I wanted to abandon my bare-metal Windows Server/VBR12 instance because of Microsoft and finally switch to VSA.So I set up and configured a bare-metal test installation of VSA on the server.This server has a direct connection to the HPE MSL 4048 tape library via a SAS controller.Full of anticipation, I then read: "Note that Veeam Software Appliance cannot be used as a tape server." at: https://helpcenter.veeam.com/docs/vbr/userguide/connecting_tape_devices.html?ver=13Seriously? That's incredibly counterproductive!Now I'm supposed to set up and maintain another server because VSA doesn't have the usual integrated tape server role? I also haven't found any option in the web UI to integrate and use the currently running tape library via a tape server, as is usually the case.Seriously? Did the DevOps team drop the ball here?

Sorry to rant, but I have nowhere else to turn, and it's beginning to impact our clients. Veeam 13 has been absolutely horrible to install on all our backup servers. The upgrades are breaking the installs on current backup servers. It is straight up failing to install and start the Veeam service on a brand new server, and Veeam support has been unable to figure it out for two weeks. I've put escalation requests in and I'm getting nowhere. has anybody seen behaviour like this? The people on the Veeam subreddit agree that Veeam 13 has been horrible to roll out.

Hello,I’m currently planning to migrate from Windows VBR to VEEAM VSA. I’m currently working with tape library, when i installed the VSA, and logged via the WEB interface, i was amazed that the console doesn’t support adding tape servers (Am i missing something ?)Installing the desktop console will fix this ? the desktop client support creating tape libraries ?If working with the client desktop console, the MFA is still supported? we can benefit from the update feature of the VSA or updating the console should be manually ? is there a way to disable the VSA Backup and replication WEB UI to keep only the console working ?Thanks in advance

Hello everyone! So currently we have deployed VBR 12 CE on a virtualized Windows machine running on Proxmox VE 8.4.11. We are backing up our OES Server running on version 24.3.3. We want to be able to backup our OES Server including the network volumes running on NSS and all the metadata for the files on these volumes. Currently we are only doing VM backups. Is this enough to backup the metadata?If not, what would be the best way to ensure the metadata is getting backed up aswell?Is it possible to perform File level restores in this configuration? Thank you, Nico

Hi All,As I checked the release notes for the Veeam Agent for Linux that supported most of Oracle Linux 8 versions but when I tried to install the agent I’ve got this error below :2/18/2024 3:24:09 PM Failed [172.17.2.207] Failed to install veeam-6.1.0.1498-1.el8.x86_64.rpm, veeam-libs-6.1.0.1498-1.x86_64.rpm and veeamsnap-6.1.0.1498-1.noarch.rpm packages: error: open of kernel-uek-devel-5.15.0-3.60.5.1.el8uek.x86_64 failed: No such file or directory Failed to invoke rpc command  0:08:012/18/2024 3:32:10 PM Failed [172.17.2.207] Failed to install Veeam Agent for Linux: error: open of kernel-uek-devel-5.15.0-3.60.5.1.el8uek.x86_64 failed: No such file or directory Failed to invoke rpc command  Can somebody let me know why I’ve got this as what I am looking for is using Oracle RMAN backup via Veeam Backup and Replication using Agent and Oracle Plugin Appreciate your help Thanks

Does anyone know if the issues with adding a workgroup (non-domain) host is limited just to VSA? Or are the same requirements in the Windows version of v13?

Hi everyone,Lately, "AI Agents" (especially autonomous agents, agentic AI, etc.) have become super popular. Lots of companies are starting to automate their business processes with AI agents. So I got curious:On the Veeam side (Backup & Replication, Veeam ONE, Veeam Recovery Orchestrator, etc.), is there any custom-built or in-use AI Agent project / tool / integration specifically for Veeam?From what I know:Veeam officially released something called Agent Commander (announced in February 2026). This focuses on detecting risks created by AI agents, protecting against them, and even undoing AI mistakes (rollback/restore). But it's more about "managing / protecting AI agents" rather than an agent that automates Veeam backup operations itself. In the community, I came across BackupPaw (shared around March 2026). It's an AI agent built on top of n8n, using Veeam REST API to let you manage bac

I am running Veeam V12 in a vSphere 7 environment and trying to upgrade to 12.3.2.4465. I mount the ISO, run setup and click Upgrade. The upgrade fails every time with the following message."An error has occurred: The system cannot open the device or file specified". I click ok to the message and the upgrade stops. We identified Possible OS or Windows Installer cache corruption.Potential missing or inaccessible .msi files.Potential ISO corruption or mounting issue. Would it be possible to move to a virtual appliance  instead of preparing  a new Windows Server, install the same or newer version of Veeam Backup & Replication, and restore configuration backup to this new server? Please advise.

I am trying to deploy Veeam Data Platform v13 on my windows server however i am getting the error “License is not valid for this product” when attaching the license to it before the deployment. Deployment cant proceed like the previous versions with no license.The foundation license was purchased late September before V13 was released so I suspected that was the case, I went into the license portal and generated a new license for V13 however the same error occurred. I have the windows defender the Kaspersky antivirus disabled to avoid having any error in deploying the license however I am stuck here.

I have ran a backup for the microsoft exchange, now i am testing the restore. We have deleted an email from the inbox. Now I have selected restore application item, microsoft exchange mailbox, the veeam explorer for microsoft exchange opened, I went to the mailbox, selected the email and started the restore. Step by step i added the target mailbox that i want to restore to, selected the onprem microsoft exchange server, i specified the admin user that has access to the exchange server, it didnt automatically populate, so i added the mailbox server manually and selected restore to original folder, is that correct? It is stuck at validating for a whileI am following the guide step by step : https://helpcenter.veeam.com/docs/vbr/userguide/restore_to_onprem.html?ver=13

Hi,I try install Veeam Backup and Replication trial, but I receive this error==An error has occurred: One or more errors occurred. (This action is only valid for products that are currently installed.)==Before I try other Veeam product veeam one.RegardsJaroslav Jasek

Is Surebackups Virtual Lab on the to do list to work with Proxmox?

Hello,I‘m very frustrated now. Had Community for years in use without any problems. Yesterday I could not open management console and get an error message. I try to reinstall software but get this error. Tried an installation on new W2022 same error. Search google - no success. Tried to solve this problem 8 hour. Now I‘m at the end of my knowlegde.  

Good afternoon, all!My customer is at the very front edge of a complete virtualization refresh - hardware, software, virtualization platform, the whole picture.We’re currently using Veeam B&R and VeeamONE to support our VMware stack, with an onsite performance layer and a cloud storage tier for long-term archiving.If we moved to Hyper-V or Nutanix, would we be able to retain our VMware-based backups for file and data recovery or would we need to repatriate and convert?Thanks!

Hello Im very new to Veeam and i installed on a server Veeam Backup and Replication. Now i get this error message: (it never worked)  I read that the API Service needs to be started, but this is not working and an error occurs.  Also its not possible do uninstall the Veeam Software with the Error → Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. It is the adiminstrator user. The new Update i was able to install but also after this update f

Hello,We are facing a backup issue with Veeam Agent for Microsoft Windows on one specific Windows 11 Pro workstation.We have two Windows 11 Pro PCs, both fully updated and both backing up to the same SMB share.On PC #2, backups work fine.On PC #1, backups always fail.The job starts normally and goes through: Initializing Preparing for backup Creating VSS snapshot Calculating digests Reading EFI partition Reading OS (C:) The failure occurs during

Hello,I have a backup of a Windows PC on the NAS and have added the NAS IP as a backup repository. However, the program says that the path contains invalid characters. If I map the NAS as a drive, I no longer get the error, but the backup cannot be found. If I download the backup to the PC, it works. What could this be?The path is:\\192.168.68.136\PC_Backups\laptop_ideapad_2026\Ideapad_Job_Aeternum\Ideapad Job Aeternum2026-03-08T115126.vbkReplacing spaces with underscores does not help either. As I said, downloading it works.I use a QNAP NAS. Regards 

Environment: Windows 10 / 11 (Desktop edition) Attempting to install Veeam Agent / Veeam Backup components Description:While trying to install Veeam, the process fails immediately with the following runtime error: An error has occurred: Dieser Vorgang ist nur für Produkte gültig, die zurzeit installiert sind.Translated: “This action is only valid for products that are currently installed.”The installer runs, but the product does not appear in Programs & Features. Previous versions of Veeam were fully removed, including all files, services, and registry entries. Even after a clean install attempt, the installer fails silently or reports this error.Steps Taken: Verified that all previous Veeam installations were removed. Cleared registry entries related to Veeam under: HKLM

Hello,we have been used company certificate into VBR console in main menu …but now we have issue with agents managed by VBR8/10/2025 10:44:54 PM :: Error: Managed session has failed: Failed to validate remote certificate  any hints, how to fix that I will appreciatethank you