Discussion Boards

I am building new physical server running Ubuntu. System is installed on hardware RAID controller. Installed VEEAM agent, made full backup. Booted up from Linux Media (unpatched), restored all volumes and after reboot server can’t boot any more =( Any suggestions?Cheers, 

Hi guys,I am starting to set up CDP replication on Cloud Connect with Veeam 12.The source and target environments are hosted on vCD.I have installed I/O filter and configured CDP proxy on both sites.However, when I go to create a CDP policy to the cloud host/provider, I have no storage policy selectable in the destination.What is not clear to me is if and how I need to apply the VM storage policy on the VMware side .According to the official Veeam documentation (https://helpcenter.veeam.com/docs/backup/cloud/cloud_replication_limitations.html?ver=120#cdp) the custom storage policy for the CDP should be automatically imported from Veeam to vCD, but unfortunately it is not present in my vCD, and the one that Veeam creates by default on the vCenter is not associated with any datastore.Unfortunately, at the moment I haven't found any other references related to these configurations, and before going to make VMware-side changes I wanted to

Hi dear Veeam community, i’m wondering if it’s possible to migrate the configuration database to a PostgreSQL DB on a Ubuntu host?Can’t find anything about that.I’ve setup the db but i’m facing an error:  The port on the ubuntu is listening, credentials are correct.Does someone have a clue?Best regards :-)

Any gotchas/considerations you would like to share?

V12 Launch Event banner. Launch date of February 14, 2023, is listed, along with the V12 and Veeam logos.Hello Community,Here’s a space for discussions on the V12 Launch Event! We would appreciate your thoughts on the event :)  What V12 capability are you most anticipating? How do you plan upgrades to Veeam Backup & Replication? SNARK - Do you tell your boss you are upgrading? How long do you wait before upgrading? Do you set a test lab for upgrades?  

Dear All,I wanted to host Veeam M365 repository on Dell Data Domain CIIFS Share (SMB2.0).  I am completely aware that Veeam M365 doesn't support SMB2.0 and being a jet blue database, it has performance impact also.  Does anybody has some workaround wherein I can backup onto primary Veeam M365 repository and then it should move the data to either CIIFS or NFS? NOTE: Don’t recommend Veeam best practices.  Regards,Sunny 

2/20/2023 2:45:40 PM :: Error: Failed to call RPC function 'FcWriteFileEx': There is not enough space on the disk. Failed to write data to the file [D:\Backups\Path - Backup Job\server - Backup Job.vbm_1_tmp].Is this a space issue or is the file corrupted.  

VMware announced the list of 2023 vExperts last Friday. You can visit the vExpert Directory to see the list and profiles of each vExpert. May I know if any Veeam Vanguards or Legends have been selected for vExpert this year? Please share your profile if you can.My profilehttps://vexpert.vmware.com/directory/155 

Service Providers, FYI, looks like licensing is going up slightly for 2023… As we look to close out the year and kick off fresh in 2023, we’re excited to recap some recent Veeam® enhancements and share some future ones. Q1 brought you Veeam Service Provider Console v6, which included licensing and usage reporting integrations to further enhance your Microsoft 365 data protection capabilities. In June of 2022, we kicked off our new partner directory, aimed at driving prospects and customers to our partner community. We’re seeing an average of 10,000+ unique visitors on this page monthly — a huge win for our partners! Our latest Veeam Backup for Microsoft 365 update included integrations and enhancements for our Veeam Cloud & Service Provider (VCSP) community (i.e., Self-Service Restore portal). Speaking of enhancements, Veeam is committed to continuous innovation and has multiple product and platform re

Hi guys, for those who have installed the RTM version, I report that the patch is out: https://www.veeam.com/kb4415 Marco S.

A few years ago we were a Service Provider with a Cloud Connect setup and offered our customers Cloud Connect Repositories. We then saw tjen object storage really started to take off it would be costly to maintain a datacenter with this service compared to the prices object storage was offered by the hyperscalators! We then started a partnership who ran Veeam Cloud Connect environemnt with service provider console. so we could still track and monitor our customers backupjob etc. but the backup now went to the object storages. I am just wondering, is it necessary to deploy a cloud connect environment at all to just use the service provider console for monitoring jobs, update the agents etc.? I can see in the marketplace (Azure) there is a dedicate appliance with the service provider console. Would that be enough to maintain our clients? We are now using Wasabi for repositories. I guess I am having a hard time to see what we would gain from the cloud connect envir

Saw discussions around this subject elsewhere, and thought it would be good to get the community’s thoughts around the subject. WIth direct to object now possible in v12, would you continue to use/recommend BCJ leveraging Veeam Cloud Connect Backup repository (with Insider Protection) or would you switch to BCJ to off-prem object storage (leverage immutability).Keen to hear peoples pros/cons. Have at it

Hi all,today I updated my Veeam Agents Free for Windows to the new version 6.x. I read about this version is no longer using SQL Express LocalDB and this is also written in the release notes. But looking in the installed software the SQL Express LocalDB is still installed.So I’m asking if SQL Express LocalDB is still needed for the Veeam Agent Free for Windows?Thank You and Kind Regeards

Hi everyone,So as you can see, I have a valid Veeam.com account and I have had it for several years now. But a few months ago, I was in the midst of some important task and logging into Veeam.com to download some software, when I was suddenly presented with a form to do… something. I can’t quite remember exactly what the purpose of it was, but Veeam wanted some additional information from me, for some reason. This included an email address, which was extra confusing since Veeam already had a valid email address for me on file. So I gave it junk data, including the email. After that though, I’m now presented with a form to verify said junk email, and I’m not allowed to access my account information until this has happened.I’m assuming I’m not the first person to have done this, since

For those that attended or signed up but did not attend the VUG Canada you can find the video here which is the Veeam YouTube channel, and I am in the process of uploading it to the VUG Canada YouTube as well.VUG Canada Meeting - Feb 16thIf anyone that attended wants the presentation slide deck just DM me with your email and I will get it sent out.

Hello All,When I log into Kasten-io system, I occasionally get "Slow Connection Dashboard-SVC Respond Slow" Error on the screen. Has anyone encountered and resolved this issue before?Thanks,Emre ÖZER

Hi all, During the V12 event there was an on-demand content video about Veeam-Man: Master of the Dataverse! If you haven't seen it, it's belowAs far as I have been told, the “ad” tells you that the action figures are sold separately. But, as one might expect it isn't (officially) available.  

Greetings,Below is a part of Cohesity's multi-layered protection against a ransomware attack as mentioned in the Cohesity datasheet, there is a document for best practices when configuring carving regular repositories and/or SOBR from Cohesity to the Veeam Server and this is can be done over SMB or NFS protocols. my question is if we followed these best practices, can we leverage Immutable snapshots and Datalock from Cohesity with Veeam Backup?  also I read this on Reddit:  

 Hello,i have this error when trying to perform a replication job with veeam backup:Processing SRVJDEPROD Error: Failed to open VDDK disk [[VMFS REP] SRVJDEPROD_replica/SRVJDEPROD_0.vmdk] ( is read-only mode - [false] ) Logon attempt with parameters [VC/ESX: [192.168.50.194];Port: 902;Login: [root];VMX Spec: [moref=36];Snapshot mor: [36-snapshot-1];Transports: [nbd];Read Only: [false]] failed because of the following errors: Failed to download disk 'VDDK:vddk://[VMFS REP] SRVJDEPROD_replica/SRVJDEPROD_0.vmdk'. Shared memory connection was closed. Failed to upload disk. Skipped argument Processing SRVJDEPROD Error: Failed to open VDDK disk [[VMFS REP] SRVJDEPROD_replica/SRVJDEPROD_0.vmdk] ( is read-only mode - [false] ) Logon attempt with parameters [VC/ESX: [192.168.50.194];Port: 902;Login: [root];VMX Spec: [moref=36];Snapshot mor: [36-snapshot-1];Transports: [nbd];Read Only: [false]] failed because of the following errors: Failed to download disk

A data center consists of groups of networking and computational infrastructure that process and store information for a business in a central location. To keep it secure, businesses must employ both virtual and physical systems designed to protect the data center. In addition to protecting the organization's computational assets, specific network security measures must be implemented to prevent malware attacks and other threats from penetrating the data center. Considering the above details  how Incident management is a series of steps taken to identify, analyze, and resolve critical incidents  to protect from Ransomware attacks what are steps taken veeam 

Friends,I have a backup scheduled to automatically run daily to a network shared folder on a windows 2019 server, which I access through a share as the local admin of that server.After executing this backup, the hd where this folder is located becomes available, showing the error stating that the folder is not accessible with the warning of "incorrect function".That server is a virtual machine and runs on hyper-v.This hd that is unavailable is mounted on this virtual machine (hyper-v).For me to solve this problem I need to turn off the virtual machine and also the host, when it starts it goes back to normal.Thanks,JJ

I would be interested to know which tool for IT infrastructure you use for your or your customers environment. Here is a completely unsorted list of tools I use frequently in various environments:PowerShell with various modules like VMware PowerCLI (by the way, version 12.3 was released today) and Veeam VBR. RVtools. I think this is a widely known and used tool. Get a very detailed inventory of your vSphere environment within a few mouse-clicks. New version 4.1.2 was released yesterday. Brocade SANHealth. I think, this tool is not

Happy Friday! Time for a bit of fun, what date do you think Veeam Backup & Replication v12 will release on? I’ll accept guesses for the next week, and update this post with everyone’s guesses.Rules:1 guess per personFirst come first served on guessing the date, if someone else guessed the date you want already, pick another!Submissions close 4th NovemberWinner will be announced when v12 releases! Entries:@Stabz - 12th January 2023@victorwu - 13th January 2023@wolff.mateus - 14th January 2023@JMeixner -16th January 2023@Chris.Childerhose - 18th January 2023@HangTen416 - 23rd January 2023

Hi Team,Since few days ago I get this error message when run a job in Veeam for Microsoft 365: “JetError -1032, JET_errFileAccessDenied, Cannot access file, the file is locked or in use”And reposity state says “invalid”The repository is a SMB shared and I can access from Windows Explorar without any problem. Can you give me and advice could be the problem? Thanks.

Hi all, I need support to find the correct way to merge 2 VEEAM Server into one.We have VEEAM A and VEEAM B, both with their data domain. for now these two servers are separate and we want to merge A and B to have only A.In my head we have to:Configure the DD of the VEEAM B on VEEAM A and rescan it. Configure a backup job with the VMs of the VEEAM B on the VEEAM A and, during the configuration, map the backup.if we take these steps are we OK or I’m missing something?Thank you.