Community

Today i googling that VBR can connect to the VDC for backup repository. Anyone ever using this scenario? And if VBR conencted to VDC is there any additional cost?

Came across a new error a bit ago within the Veeam Agent and I’m sharing this for my future self (and anyone else).  If all of the actions I performed took care of the issue, or if it it was just a single item, but here’s what I had to do for the below errors. The Errors10/18/2023 1:35:22 AM :: Data Partition (F:) (604.9 GB) 342.2 GB read at 69 MB/s10/18/2023 3:00:25 AM :: Error: The device is not ready. Failed to schedule asynchronous read operation Failed to upload disk. Agent failed to process method {DataTransfer.SyncDisk}. Exception from server: The device is not ready. Unable to retrieve next block transmission command. Number of already processed blocks: [1402697]. Failed to download disk '0f9d11e0-8171-459b-819c-ebf55d31c45c' The Actions/ResolutionIn my case, researching this error indicated there was an issue with the volume, possibly with a disk table not matching the actual size or something along those lines.  It was indicated that I should try shrinking the volume.  There

Recovered VMs not powering up in Datalab test due to unable to access virtual hard disks.Have a couple of large VMs with multiple disks (60 and 90 TBs and 10 disks on each VM) that will not power up due to the error above. We are using storage failover and we have daily replication of the production volumes to our DR volumes. Replication status on our Storage device show that replication is successful but vsphere shows host incompatibility/permission issue accessing the disks.I don’t think that this is either a host or permission issue since the other virtual disks for the same VMs can be seen in vCenter. There are other VMs in the Orchestration and these are the only 2 servers that would not come up. Below is a screenshot from vCenter.  

Hi All,We have the Veeam Service Provider Console 8.1 installed and it is generally working fine, but suddenly on many job for Windows Agents, operation mode Workstation, we see this error message. Error: Cannot set many inner exceptions to exception System.Exception VSPC and VBR is installed on the same VM. As a first step we upgraded VBR to the latest version. Windows Agent Version are on 6.3Any hint is highly appreciated.Thanks,Edy  

Hi thereToday, I want to share with you all a technology/partner that caught my eye at VeeamOn 2025 in San Diego, CA.Have you ever wondered how to «enforce» or «protect» your Veeam Windows Setup, with local / presented Storage, without modifying or adding Appliances/devices to your Infrastructure?Here is where Blocky comes into Play.The Only Ransomware Protection That Runs on the Veeam Windows Server.Blocky installs and runs directly on Windows-based Veeam Backup & Replication (VBR) servers—securing backup jobs at the source without requiring added hardware, Linux, or infrastructure changes.Blocky hardens the Windows VBR against ransomware threats by transforming the ReFS and NTFS volumes into a zero-trust, Write Once Read Many (WORM) volume.This creates robust ransomware protection for Veeam backup volumes without disrupting operations.Another important aspect is that the learning curve is relatively easy to learn/manage.No extra Hardware/tech needed, and no modifications (or big

Hi,I am using the free Windows Agent program.  I have two 4TB external drives that I want to use for backups.  I don’t know if this can be done, but this is what I’m envisioning:Drive A is in my house.  Drive B is off-site.I connect Drive A to my laptop and kick off a full backup.  Every couple days, I reconnect Drive A and run another backup (incremental).  At the start of the next month I will go swap Drive A and Drive B.When I connect Drive B, I want to run another Full backup.  Then every few days I run an incremental.  At the start of the next month I swap drives again.At this point, I want to treat it as a new chain of backups and start with a Full and then go to incremental.  As long as the drive isn’t full, I don’t want to ever delete backups just because they are “old”.  Can any/all of this be automated with the Free Agent for Windows program?  Is there a better way to handle this whole thing?Just looking for advice for this whole process.Thanks!

Im trying to run a powershell script to turn off/on a service on the remote computer. I run Veeam VBR as a local service instead of an AD service account. Is this why my script is failing?Ive tried both of these and using SNMP as an example. Of course they both work interactively from the VBRserverGet-Service -computername RemoteComputer -DisplayName "SNMP Service"| Stop-Serviceinvoke-command -ComputerName RemoteComputer -ScriptBlock {Get-Service -Name "SNMP"| Stop-Service}  **********************Windows PowerShell transcript startStart time: 20250807125230Username: WCG\SYSTEMRunAs User: WCG\SYSTEMConfiguration Name: Machine: VBRserver (Microsoft Windows NT 10.0.17763.0)Host Application: powershell.exe -ExecutionPolicy ByPass -Command  try {& 'C:\VeeamScripts\freeze-tk.ps1'  -ErrorAction Stop } catch { exit 1 } Process ID: 24996PSVersion: 5.1.17763.7553PSEdition: DesktopPSCompatibleVersions: 1.0, 2.0, 3.0, 4.0, 5.0, 5.1.17763.7553BuildVersion: 10.0.17763.7553CLRVersion: 4.0.30319.4

Now that V12.1 is available, I wanted to share with you a featured YARA rule set that can give you on-demand scanning for some top ransomware threats. Attached to this post is a file named: Top10RW_YARArules.zip. In this file are YARA rules for some common ransomware threats that have been seen recently:Attribution: This great collection was made by Felix Bilsten. Links: X: Felix Bilstein (@fxb_b) / X (twitter.com), website: Felix Bilstein - project overview (cocacoding.com) and Github: fxb-cocacoding (Felix Bilstein) · GitHub

I’ve been using the free Veeam Windows agent for quite sometime, to backup my 3 Windows desktops to my TrueNAS server.  Wonderful product, I might add!One of my Windows machines is a Windows 10 box that cannot be upgraded to Windows 11 due to hardware limitations.  So I have installed Linux Mint Cinnamon on this machine.  I have then installed the free Linux agent to allow me to backup this system to my backup server.  This is where the problems begin.The machine now running Linux Mint will not wake up at the specified time to do a Veeam backup.  I have installed the Linux agent (blksnap) and have created a backup configuration, performed a full backup, created and patched the recovery imaged and tested the recovery all without any problems.  Now, I have put my Linux system into “suspend” mode and then waited till 02:30 to see if it would wake and do an incremental backup.Well, nothing happens; the system does not wake up at 02:30.I have done a manual incremental and it works fine, but

Hello All, I have recently encountered an issue with the Veeam Self restore portal being unavailable after upgrading the VSPC console server version. We have the Web UI and Console Server roles deployed in a distributed architecture.Initially, when clicking on the File Level Restore portal, it would redirect to URL "/Connectors/VeeamAgentsSelfServicePortal" and then return to the VSPC main portal. What I found initially was that the VeeamAgentsSelfServicePortal Application Pool was missing from IIS sites, and I had to recreate the pool to resolve the page loading error. After that, I encountered an issue where the Restore portal was responding with a "Service unavailable" error.  Here is the fix how I resolved the “Service Unavailable” error  1) Navigate to WebUI server to:C:\Program Files\Veeam\Availability Console\Integrations\VeeamAgentsSelfServicePortal\APIs\appsettings.jsonCheck for TrustedServerCertificate and ConnectionCertificateIf it's not the correct one then you need to repl

I'm stuck.Veeam Threat Hunter is used by default to scan backups. I would like to scan my backups with my own software as well.Why didn't Veeam leave this as an option in the XML file? 😣 Has anyone tested this yet? So third party + Veeam Threat Hunter.

hello, thanks, i ran a manual re-scan of the backup repositories.why are some repositories have `skipped` ? some of the .vbm files are damaged? i know VBAR has this scary quirk where for agent backups, even if i have the .vbk, i cannot restore without the .vbmplease advise, thanks, david          Starting backup repositories synchronization         Enumerating repositories         Found 10 repositories         Processing backup repositories         br_theserver03_theen10_cdrive_old: Synchronizing         br_theserver03_theen10_ddata: skipped 1         br_theserver03_theen10_cdrive: skipped 1         br_hetz05: Synchronizing         br_theserver03_theen10_falconer_02: skipped 2         br_thevserver03_Virtual-Machine agent_vserver03_01: skipped 1         br_theserver03_theen10_cdata: No backups found         Default Backup Repository: skipped 1         br_theserver03_ts-ubuntu01: failed 1         br_theserver03_theen10_falconer: failed 1Warning    Failed to import backup path V:|br_thev

Hi Community, If you have just deployed Veeam Backup for Google Cloud (VBGC), the next step is proper configuration to smooth backups and restores. Here’s a simple, step-by-step guide to help you get started quickly: 1️: Add GCP Projects:Go to Configuration → Projects → Add Project.Use Service Account credentials to connect.Make sure the Service Account has the required IAM roles:Compute Admin Storage Admin Cloud SQL Admin Spanner Admin 2️: Set Up Worker Profiles:Navigate to Configuration → Workers → Profiles.By default, you’ll have:Primary Profile (e2-highcpu-8) for regular backups Secondary Profile (e2-highcpu-2) if quotas are tight Archiving Profile (e2-standard-4) for archive jobs 3️: Configure Backup Repositories:Choose Google Cloud Storage buckets or connect external object storage. Use separate buckets for short-term and long-term retention if possible. 4️: Create Backup Policies:Go to Policies → Add Backup Policy.Select projects, regions, and VMs to protect.Define:Backup type (

VMware Cloud Foundation (VCF) 9.0 brings a redesigned architecture that changes how private cloud infrastructure is structured and managed. Whether you're coming from earlier VCF versions or looking at the platform for the first time, this guide breaks down what’s new and how it works in practice. At a high level, VCF 9.0 is a hierarchical system that scales from a single site to globally distributed infrastructure. Here’s how it’s organized and how each layer fits into day-to-day operations. Three-Layer Hierarchy of VCF 9.0VCF 9.0 structures infrastructure into three layers, each serving a clear purpose: Layer 1: Private Cloud (Top-Level)This is the entire footprint of your private cloud environment. It encapsulates everything…your regions, Fleets, and Instances. You can think of it as the top-level container where policy and strategy decisions start.Layer 2: Fleet (Mid-Level)A Fleet is a logical grouping of infrastructure that shares centralized services. Each Fleet includes: VCF Ope

I have backup olicy to backup sharepoint using VDC and this job run from Jul 29 and until now the job still in ‘Object waiting for processing’. Already open ticket but until now the support team still investigate. So i posted here hopefully someone here know how to solve this 

We are building a “green zone” where basic infrastructure systems including a hot standby backup environment should be running. This env is completely separated from current pro environment. This env will have no AD at the beginning. VBR is using a dedicated SQL server.Our current VBR server is running in prod domain (ideas to move it and all Veeam systems to a dedicated domain exist for a long time but were never implemented. The idea to remove the systems from domain and use Workgroup also exist).The very simple idea is currently to have a second VBR VM instance running there + some other Veeam components + a empty Linux repo and start downloading/stage backups from immutable Cloud Object Storage to a local Linux repo in this green zone ASAP to have everything local again and ready to restore. VBR server and all Veeam systems will run in Workgroup mode then. Ideally we would at least have the Veeam config backup available + all needed credentials an keys.Would this be possible out of

case: 07735344keyword:  Server 2025,  24h2,  upgrade ReFSA few days after upgrading to Server 2025 (in-place upgrade ...yeah yeah...i know but options were limited), the CPU started to peg on the VM which would also max out the CPU of the host.  The VM would be unreachable/unusable until after a cold restart. Ultimately, it looks like ReFS version was slowly being upgraded on our SAN due to the upgrade and it was incompatible with Veeam.  If I kept all veeam services off...no issues.  Once the services were on (even with all jobs disabled), the CPU would once again peg and the VM would hang.After weeks of troubleshooting, I had to cut my losses and reformat/reinstall using server 2022....blowing away all backups.  Importing saved backup config did bring the Veeam server back with all settings and I was able to slowly bring all my backups online (I had to do it slowly because we have backup copy jobs going over a wan which took days. CMadison

Whenever I'm involved in a project that includes a deduplication appliance or even a dedicated storage system, the hardware vendor typically recommends implementing replication at the hardware level.In these scenarios, I often suggest using software-based replication, orchestrated by Veeam.Which approach is truly more appropriate? Is there a best practice for this? Do both methods work effectively?My recommendation is always based on the ability to control data retention and expiration, as well as the use of GFS (Grandfather-Father-Son) policies.Should I continue to follow this line of thinking? Does using hardware-based replication affect this in any way? Is retention management compromised?

Hi Veeam Community, I have seen many questions (and experienced a few issues myself) when deploying Veeam Backup for Google Cloud (VBGC) in production environments. Most of these could have been avoided with some pre-deployment checks. So, I wanted to share a quick checklist that might help others save time and frustration. 1️: Service Account Preparation Create a dedicated Service Account (SA) in GCP. Assign all required IAM roles/permissions for each project you plan to back up. Test SA access via the VBGC diagnostics tab — all checks should show "Passed" before deployment.  2️: Quota Review Check CPU, disk, and instance quotas for each region where VBGC will deploy worker instances. Adjust quotas in advance if you plan to use higher-spec worker profiles (e.g., upgrading from e2-highcpu-8 to n2-highmem-16).  3️: Network & Access Ensure VBGC and worker instances can access the internet when needed (especially during updates and temporary VM deployment). If using private ne