Discussion Boards

Saw discussions around this subject elsewhere, and thought it would be good to get the community’s thoughts around the subject. WIth direct to object now possible in v12, would you continue to use/recommend BCJ leveraging Veeam Cloud Connect Backup repository (with Insider Protection) or would you switch to BCJ to off-prem object storage (leverage immutability).Keen to hear peoples pros/cons. Have at it

Hi all,today I updated my Veeam Agents Free for Windows to the new version 6.x. I read about this version is no longer using SQL Express LocalDB and this is also written in the release notes. But looking in the installed software the SQL Express LocalDB is still installed.So I’m asking if SQL Express LocalDB is still needed for the Veeam Agent Free for Windows?Thank You and Kind Regeards

Hi everyone,So as you can see, I have a valid Veeam.com account and I have had it for several years now. But a few months ago, I was in the midst of some important task and logging into Veeam.com to download some software, when I was suddenly presented with a form to do… something. I can’t quite remember exactly what the purpose of it was, but Veeam wanted some additional information from me, for some reason. This included an email address, which was extra confusing since Veeam already had a valid email address for me on file. So I gave it junk data, including the email. After that though, I’m now presented with a form to verify said junk email, and I’m not allowed to access my account information until this has happened.I’m assuming I’m not the first person to have done this, since

For those that attended or signed up but did not attend the VUG Canada you can find the video here which is the Veeam YouTube channel, and I am in the process of uploading it to the VUG Canada YouTube as well.VUG Canada Meeting - Feb 16thIf anyone that attended wants the presentation slide deck just DM me with your email and I will get it sent out.

Hello All,When I log into Kasten-io system, I occasionally get "Slow Connection Dashboard-SVC Respond Slow" Error on the screen. Has anyone encountered and resolved this issue before?Thanks,Emre ÖZER

Hi all, During the V12 event there was an on-demand content video about Veeam-Man: Master of the Dataverse! If you haven't seen it, it's belowAs far as I have been told, the “ad” tells you that the action figures are sold separately. But, as one might expect it isn't (officially) available.  

Greetings,Below is a part of Cohesity's multi-layered protection against a ransomware attack as mentioned in the Cohesity datasheet, there is a document for best practices when configuring carving regular repositories and/or SOBR from Cohesity to the Veeam Server and this is can be done over SMB or NFS protocols. my question is if we followed these best practices, can we leverage Immutable snapshots and Datalock from Cohesity with Veeam Backup?  also I read this on Reddit:  

 Hello,i have this error when trying to perform a replication job with veeam backup:Processing SRVJDEPROD Error: Failed to open VDDK disk [[VMFS REP] SRVJDEPROD_replica/SRVJDEPROD_0.vmdk] ( is read-only mode - [false] ) Logon attempt with parameters [VC/ESX: [192.168.50.194];Port: 902;Login: [root];VMX Spec: [moref=36];Snapshot mor: [36-snapshot-1];Transports: [nbd];Read Only: [false]] failed because of the following errors: Failed to download disk 'VDDK:vddk://[VMFS REP] SRVJDEPROD_replica/SRVJDEPROD_0.vmdk'. Shared memory connection was closed. Failed to upload disk. Skipped argument Processing SRVJDEPROD Error: Failed to open VDDK disk [[VMFS REP] SRVJDEPROD_replica/SRVJDEPROD_0.vmdk] ( is read-only mode - [false] ) Logon attempt with parameters [VC/ESX: [192.168.50.194];Port: 902;Login: [root];VMX Spec: [moref=36];Snapshot mor: [36-snapshot-1];Transports: [nbd];Read Only: [false]] failed because of the following errors: Failed to download disk

A data center consists of groups of networking and computational infrastructure that process and store information for a business in a central location. To keep it secure, businesses must employ both virtual and physical systems designed to protect the data center. In addition to protecting the organization's computational assets, specific network security measures must be implemented to prevent malware attacks and other threats from penetrating the data center. Considering the above details  how Incident management is a series of steps taken to identify, analyze, and resolve critical incidents  to protect from Ransomware attacks what are steps taken veeam 

Friends,I have a backup scheduled to automatically run daily to a network shared folder on a windows 2019 server, which I access through a share as the local admin of that server.After executing this backup, the hd where this folder is located becomes available, showing the error stating that the folder is not accessible with the warning of "incorrect function".That server is a virtual machine and runs on hyper-v.This hd that is unavailable is mounted on this virtual machine (hyper-v).For me to solve this problem I need to turn off the virtual machine and also the host, when it starts it goes back to normal.Thanks,JJ

I would be interested to know which tool for IT infrastructure you use for your or your customers environment. Here is a completely unsorted list of tools I use frequently in various environments:PowerShell with various modules like VMware PowerCLI (by the way, version 12.3 was released today) and Veeam VBR. RVtools. I think this is a widely known and used tool. Get a very detailed inventory of your vSphere environment within a few mouse-clicks. New version 4.1.2 was released yesterday. Brocade SANHealth. I think, this tool is not

Happy Friday! Time for a bit of fun, what date do you think Veeam Backup & Replication v12 will release on? I’ll accept guesses for the next week, and update this post with everyone’s guesses.Rules:1 guess per personFirst come first served on guessing the date, if someone else guessed the date you want already, pick another!Submissions close 4th NovemberWinner will be announced when v12 releases! Entries:@Stabz - 12th January 2023@victorwu - 13th January 2023@wolff.mateus - 14th January 2023@JMeixner -16th January 2023@Chris.Childerhose - 18th January 2023@HangTen416 - 23rd January 2023

Hi Team,Since few days ago I get this error message when run a job in Veeam for Microsoft 365: “JetError -1032, JET_errFileAccessDenied, Cannot access file, the file is locked or in use”And reposity state says “invalid”The repository is a SMB shared and I can access from Windows Explorar without any problem. Can you give me and advice could be the problem? Thanks.

Hi all, I need support to find the correct way to merge 2 VEEAM Server into one.We have VEEAM A and VEEAM B, both with their data domain. for now these two servers are separate and we want to merge A and B to have only A.In my head we have to:Configure the DD of the VEEAM B on VEEAM A and rescan it. Configure a backup job with the VMs of the VEEAM B on the VEEAM A and, during the configuration, map the backup.if we take these steps are we OK or I’m missing something?Thank you.

I have a very unstable wireless connection on an endpoint that likes to go down during periods of high use, or just whenever it feels like it. Addressing the connection issue remains its own task, but for the time being, it seems like the Veeam Agent (Agent for Microsoft Windows 5.0.3.4708) is very intolerant to any sort of network issues. When the connection inevitably goes down, the backup process will be cancelled with the error:Error: write: An existing connection was forcibly closed by the remote host Failed to backup file. I’ve looked through the backup settings, and I did see one section titled Backup Cache which apparently is supposed to cache the backup locally until Veeam can connect to the server. Despite having this option enabled, the Agent still throws its hands up at the first sign of network trouble.Hoping there is someone here who knows a magic trick to get the Agent to tolerate unstable connections, or c

Just a reminder if you have not already signed up and want to learn more about Tape join the VUG Canada group of myself, @HangTen416 and Vinh Pham (SE) on February 16, 2023, at 12PM Eastern as we discuss all things tape!  Link below to register -VUG Canada - Feb 16/23

File backup job is failing with above error please assist.

Hello,I need support to restore an Oracle base via RMAN with the Oracle Plugin on another server.Running the command below returns the following message:[oracle@oracle01]<ORACLEBKP> #OracleRMANConfigTool --configure-restore-from-copyYou will be unable to run RMAN backups while "Restore from copy" mode is enabled. Proceed with enabling?  (y/N): yNo secondary destination jobs available[oracle@oracle01]<ORACLEBKP> #I followed the directions in the link:https://helpcenter.veeam.com/docs/backup/plugins/restore_from_copy.html?ver=110Can anyone help me please?Regards,Jackson 

The workstation is in a Protection Group and Agent Version 5.0.3.4708 is installed.The workstation was added over the Active Directory and the AD shows Windows 10 Professional is installed.  I also logged into the workstation and yes indeed Windows 10 Professional is installed.  Windows 11 is blocked from installing in our Network using a GPO and the Workstation was not upgraded to Windows 11 and then reset back to Windows 10.Its been showing the warning since Tuesday.  Removing it from the Protection Group and re-adding it does not help. 

Happy Friday everyone, Today’s inspiration for Fun Friday comes from Reddit. I saw a picture today of a fibre cable broken by… an arrow!https://www.reddit.com/r/nevertellmetheodds/comments/10ya76l/arrow_accidentally_pierces_fiber_utility_line_and/?utm_source=share&utm_medium=web2x&context=3 Sometimes shocking events like this happen that you just wish you’d caught on camera. Reminds me of the time that I had a 2-post UPS, had just installed it into the rack, and all the cage nuts sheered simultaneously, and it crashed down onto an LCD monitor that we weren’t allowed to relocate. The best part? The hinge bent back on the monitor but was still in-tact, and the screen! Of which the bezel had taken the

I’ve randomly had two backups corrupt at one of my clients. Not sure why it happened, but they did. On one of them, I deleted from disk all of the restore points on the local datastore, and took a new full. I left the cloud data alone, and as we speak, the new restore points are peacefully transferring offsite, no issue. The second backup has been a different story… Because of the nature of the server, I decided to take a new full and leave the old data in place, just in case. The new full local backup was fine, but the offsite failed. I tried running an active full of the offsite, but same deal; the offsite failed. So now I am trying a new strategy. I took a look at the restore points and 99% were corrupted (I believe this was the offsites), so I decided to just wipe everything and start from scratch, because I think the corrupted restore points are causing issues with the new data going offsite. The offsite failures have been throwing an error I’ve never seen before.

Team,Having a hard time trying to get physical server boot from the bootable media if Secure boot enabled. Docs says it is supported, but I can boot up from the media as soon as it is disabled. See the error below. Any suggestions?  Cheers,Alex

Time to celebrate as Veeam rated as 19th position out of Top 100 #cloudstorage See the Link  as follows The 20 Coolest Cloud Storage Companies Of The 2023 Cloud 100 | CRN

Hi All, Currently we do an Instant recovery from the ‘Entire Computer’ backup taken by Veeam agent, it goes for P2V conversion. Once the instant recovery completes, when we initiate ‘Migrate it to Production’ (may be to VMware Hypervisor using dedicated proxy which can handle 4 concurrent tasks. But it seems Veeam is treating the restore as single task and the number of VMDK files/Disk associated with the restored VM is migrated one by one which prolongs the RTO. Is there a way to consider each VMDK file as separate task (which will allow for parallelism) during the entire VM restore (using instant recovery method and ‘Migrate it to Production’)?

FYI, for those of you with WordPress sites (looking at you Vanguards, but I’m sure there are others), I came across a nice plugin for backing up to Wasabi.  This isn’t really Veeam specific at all, but I figured I’d share anyway.You can find a WordPress plugin called backWPup and create a Wasabi bucket and point the plugin to backup there.  Wasabi actually has a page dedicated to it, but honestly, it was so easy to setup, it was probably unnecessary.  It can of course backup to FTP, Dropbox, Google drive and such like most apps, and there are probably other plugins that do this as well, but since a lot of folks have Wasabi accounts already, I figured it might be helpful for others if they don’t already have something in place.https://wasabi-support.zendesk.com/hc/en-us/articles/115001900632-How-do-I-use-Ba