Skip to main content
  • EN

Discussion Boards

Join discussions around Veeam community projects, Veeam events, industry and technology news

  • 3,424 Topics
  • 30,800 Comments
3424 Topics
K
Kwok EddieComes here often
asked in Discussion Boards
SQL Server backup send a packet to Veeam Server Port 445

When Veeam Backup Server is backing up with SQL Server, SQL Server will send packet port 445 from Veeam Backup Server. What is the problem and how to solve it? 

876
coolsport00
A
ArinComes here often
asked in Discussion Boards
How to tell which backup proxy is being used by agent based backup job

How to tell which backup proxy is being used by agent based backup job? NAS file share backups show the proxy server being used but not seeing the same for an agent based backup job.

4875
coolsport00
A
ArinComes here often
asked in Discussion Boards
Is it possible to throttle specific backup copy jobs ?

I want to give copy job A 10 MB/s but copy job B 2 MB/s. Both go to the same target offsite repo

9766
coolsport00
J
jmaticurenaComes here often
asked in Discussion Boards
I cannot read tape after ejecting it from the drive using the Eject option

Hi team: I have a question: it turns out that I was going to read a tape in Veeam, I took out the previous one (tape3 that's what it's called), it came out without problems and I put the other one in (tape2). When it read the device, Veeam recognized the tape but with the same information as the previous one (tape3). When I took it out with Eject it came out without problems and when I put it back in it didn't read it as Idle or Free.What could have happened to make him behave that way? I played the tape I had at the beginning (tape3) and it reads it without incident.Regards,

6910
coolsport00
A
ajsoldevillaNot a newbie anymore
asked in Discussion Boards
Change socket liscenced name

Hi all and thanks for reading!!I have a socket liscencing in a host called “roma6-1”. Now, i updated the esxi and the new name of the host is “roma-linux-1”. Well, i revoke the liscence of the host “roma-1” but when i run a job, it still appears with the old name “roma6-1”, i dont know why doesnt appear the new hostname “roma-linux-1” as appears in the inventory of veeam for example. I have searched in my dns, esxi conf, idrac conf, etc. and all is fine. Id should be something cached in veem, i suppouse, but i dont know where looking for.¿Can you help me please?

32426
coolsport00
A
ArinComes here often
asked in Discussion Boards
prevent admins from deleting backups

I know theres immutable backups but i dont have that repo right now. How can i prevent admins from them inadvertently in 2 clicks delete an entire decade worth of backups ? 

34711
coolsport00
Scott
ScottVeeam Legend
posted in Discussion Boards
12.1 install and Malware Detection

Well, I just did the upgrade to 12.1 and things could not have gone more smooth. I did have to uninstall the console on my desktop manually and reinstall it but the server side went great.It seems like it’s running quick, and the new features are fantastic. The malware detection is going to take a bit of tuning, due to the amount of files, and odd file types some of these video players use, but I am very excited that these are now included in B and R. 

1146
dloseke
k00laidIT
k00laidITVeeam Vanguard
asked in Discussion Boards
Importing 12.1 encrypted backups to v12

Hi all, had an internal report of having a challenge with taking a backup chain encrypted with 12.1 and being able to import those backups into a v12 VBR. Has anybody else tried this?I know that 12.1 is considered a non-breaking release and backups definitely work when you take 12.1 to 12.0 VCC servers, but not being able to import could be an issue, albeit one that can be worked around with extract.exe.

662
dloseke
k00laidIT
k00laidITVeeam Vanguard
posted in Discussion Boards
What's your favorite VBR Trick?

We all know that Veeam Backup & Replication is great for doing exactly what it says, backing up and replicating virtual machines. What is less talked about is all the other things it enables through those and other capabilities such as Sure Backup, application aware backups and secure restore. What is that thing that you’ve done with VBR that isn’t necessarily a listed feature or use case but is a great time saver?I’ll start with my favorite: Created a process where I launched a full Cisco VoIP HA stack (2x CUCM, 2x Unity, 2x UCCX, 2x something else i can’t remember) into a Veeam Sure Backup lab from the backups, upgrade the entire stack in the lab, shutdown and removed the production from inventory then migrated the lab ones into production, Rebooted the phones. Cut my system downtime for major version upgrades from 24 hours to 10 minutes.

25412
dloseke
J
jmaticurenaComes here often
asked in Discussion Boards
domain administrator credentials used in veeam

Hi team:I have a question regarding the title above. It turns out that for many things in Veeam (access to hosts, jobs, console, etc.) I use the domain administrator's credentials. If I have to change said password, should I make adjustments to all the accesses described above? Regards,

80213
coolsport00
A
Andrew ManujaComes here often
asked in Discussion Boards
How to identify physical hard disk drives sitting in multiple SAN devices connected to a single ESXi host?

Hi Team,Got two question and appreciate your response.Q1.In my work environment, we got 3 ESXi hosts and each have connected to multiple SAN devices to store data in different locations. I need to do a mapping exercise to identify the physical HDD’s (inside each SAN device) locations to above said individual ESXi host. I can access the ESXi host from a web interface and can view the datastores connected to individual ESXi host. Further, I can retrieve basic information of  the HDDs (physical) but not an option to locate in which SAN device they are stored.Hope my question is clear and appreciate your valuable support to obtain the best eway to perform this exercise?Q2.Also would like to know a tool or a mechanism to detect the health status of the physical HDD. The HDDs are in the production environment would like to know an industry best practice to determine the health status please?Than you in advance. Kind regards, Andrew 

646
coolsport00
T
tedewComes here often
asked in Discussion Boards
Immutable backup (LHR) and VMs

Hello,I have a question about backuping VMs on LHR.Is it ok to backup VMs with snapshots on LHR (retention is set 20day)?? I'm asking because i heard that it is danger - but no details why…. Thanks,   

18510
coolsport00
R
Rick WNew Here
asked in Discussion Boards
Veeam Backup Repository Access is Denied

Fairly new to Veeam so this may be a silly question.I’ve had Veeam for Office 365 setup and running for a while, but recently my repository which had been working fine stopped working.The repository is a shared folder on a Buffalo NAS.  Editing my Repository, and checking Free Space I get “Access is Denied”. yet through File Explorer I can  fully access that share.

7098
coolsport00
D
dikaComes here often
asked in Discussion Boards
helper appliance veeam

Hi all,  I have read about helper appliance in Veeam documentation, is helper appliance will give better performance while we backup to AWS ? Because, now when I backup to AWS, there is always bottleneck on target, it is around 95% for bottleneck 

29813
coolsport00
K
Kwok EddieComes here often
asked in Discussion Boards
Creating VM recovery point but failed to finalize guest processing (Hyper-V Guest)

I received a backup job problem today. Successfully created Hyper-V Guest (creating a VM recovery checkpoint with Veeam application-aware processing). The next step is Failed to finalize guest processing. Error: RPC function call failed. Function name: [BlobCall]. how to fix it and resolve the issue. thanks 

15229
coolsport00
P
ptmy305Not a newbie anymore
asked in Discussion Boards
Slow backup problem

I’m testing the Veeam Backup & Replication Community Edition on 2 Windows 10 Pro PCs, connected with Gigabit Ethernet.  Everything’s functional.  With no throttling, backup read speed fluctuates between around 60Mb/s and 140Mb/s (note - when the read speed was around 77Mb/s, network usage shown in Task Manager on the server computer for Veeam Agent was around 940Mb/s).  But browsers and email applications on the client computer become unresponsive at times.  Setting throttling (via a Network Traffic Rule on the server) to 50Mb/s fixed the unresponsiveness problem.  But with the throttling, backup read speed dropped drastically, hovering between 1Mb/s and 5Mb/s.  I got the same result after disabling firewall and antiVirus on both computers. Does anyone have a recommendation on how to track down the cause of this problem?  

696615
coolsport00
A
ArinComes here often
asked in Discussion Boards
Can VBR server also be WAN accelerator ?

Can my physical VBR server also be a source WAN accelerator ? Can my target repository server also be the target accelerator? 

1199
coolsport00
Shaokat
ShaokatInfluencer
asked in Discussion Boards
VMware RDM Replication

Hello all,One of my customers has two node SQL DB cluster using VMware RDM. Customer wants to replicate this using the Veeam Backup and Replication. Is it possible to replicate this RDM?what is the process for this ? Thanks you

86017
coolsport00
MavMikeVBR
MavMikeVBRInfluencer
asked in Discussion Boards
Veeam v12 - AD Explorer restore issue

I’m running Veeam v12 and performing some restore tests via AD explorer.When I try and restore object to the domain (this is another domain we are backing up, not the domain the Veeam server is connected to), the credential window appears. Enter that but always get error box “The supplied credential is invalid”here is the extract from the veeam log file:Connecting to domain controller rd.domain.org (port: 389, user: RD\serviceusername)…Error: The supplied credential is invalidAny help would be welcome, thanks.

62424
coolsport00
DrObject
DrObjectNot a newbie anymore
asked in Discussion Boards
Cannot find any buckets in Region

I’m testing several On-Prem S3 Object Backups ( Backing up Object Storage in 12.1) no matter which of the 4 systems I try I get the attached error. All of the systems have “buckets” that Veeam 12.1 has written to, and they have data in them, and are set as repo’s in VBR that I am using for this test. Suggestions? Error is attached - I get it on all of them. 

76913
coolsport00
A
ArinComes here often
asked in Discussion Boards
Unable to restore mailbox items that contain attachments

When I using Veeam explorer to restore mailbox items with attachments to a user’s mailbox on On- premise Exchange Server the restore job fail with the below error:"Failed to create items. The underlying connection was closed: An unexpected error occurred on a send. Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host."Any ideas? 

65020
coolsport00
MicoolPaul
MicoolPaul
posted in Discussion Boards
Fun Friday: What do you use to lab/test?

Happy Friday everyone! I’m back for another Fun Friday question: What do you use to lab/test/play with technology? Whether you’ve just got a preferred cloud provider, live on the “hands on labs” of a particular vendor, or have a substation in your garden powering a giant datacentre in your basement, I wanna hear it! I’ve currently got a 48 Port 1Gbps PoE switch with 6x 10Gbps uplinks, 2x HPE quad core servers with 32GB RAM each running ESXi and if I need to overflow I’ve got VMware workstation on my quad core 32GB PC, all sat under my desk! (#toasty for the winter)

28523
Geoff Burke
M
miriam1989Comes here often
asked in Discussion Boards
Veeam Backup Enterprise Manager Invalid username or password

hiI first created local users and made them members of the portal administratorI removed the enterprise manager server from the domain and now it works as a workgroup.Now I have the Error of invalid username or passwordDoes anyone have a solution?

131314
Link State
D
dtheoNew Here
asked in Discussion Boards
Veeam Proxy without domain

For security reasons, our backup proxies should not be domain servers. Can anyone tell me if and how I can add a non-domain server as a backup proxy? Both the server and the proxy are VMs and in the same networks.

91220
Link State
A
ArinComes here often
asked in Discussion Boards
Install 2nd VBR server in secondary site

I’d like to install a second VBR Enterprise Plus server (different catalog) to my secondary site for backing up servers at that location. Question is, can I use my existing license on it and have both VBRs running at the same time?I have a 30 instances license. 

5018
k00laidIT

Badge winners

Show all badges
Terms & Conditions