Discussion Boards

Even though the datastore exists and can be referenced at destination ESXi host, the workingDir parameter was removed during restore with the following message.2022/12/02 11:48:46          Removing workingDir parameter because it points to a non-existent datastore /vmfs/volumes/63652fbd-aed4fef5-8da8-48210b3d7365After checking with support(Case # 05738353), we were told that the Veeam specification is that if the root directory of the datastore is specified, it is removed even if it exists.Please note that there may be few cases where the root directory is specified.

Backup frequency - Daily one  incremental and Weekly active FullReplication - Every 15 Minutes

I’m using VBR Enterprise and I’ve an issue with a SQL Server database restore to a Hyper-V VM.  I am currently backing up the VM using guest application processing which is working fine.  It uses PowerShell Direct because the SQL VM is on a private VLAN, which cannot be accessed from the VBR server which is hosted in a different data centre. It can however access the hypervisors and all backups have been successful.  Frustratingly, I’m unable to restore using the same methodology in reverse.  Surely if I can backup successfully using PSDirect, I should be able to restore using the same method?  I asked Veeam Support and they sent me here. 😐When I try a restore, I get an error saying VBR cannot access SQL… I can confirm that Named Pipes is enabled. Has anyone else ever run into this issue and found a fix?  I really don’t think it’s acce

We are new with using Veeam P2V. We’ve successfully P2V’d a couple of servers without a issue.We have been asked to P2V a Dell server running windows 2012R2.  Has 1 Hard drive that is 1TB.We deployed the Veeam agent and backed it up OK. We migrated into production (with NIC not connected and powered off). Once it was completed, we removed the nic from it in VCenter and added the VMXNET3 adapter and the correct assigned the Vlan back to it. We powered it on (w/NIC not Connected) and the server comes up and displays “Getting Devices Ready” and it just sits there with circle spinning.Anyone seen this before and have any suggestions of what the issue could be?  

I just want to say how grateful I am for the Veeam culture and the way they operate as a company and their extensive involvement in the Veeam community. I have extensively also used a competing product and I feel largely ignored by them and I have deep seeded impression that the company’s engineers couldn’t care less about the customers’ ideas and concerns and believe they know better than the customer and just choose to ignore 99% of what is suggested to them, meanwhile they seem to have the development  acumen and abilities of first year college students. Meanwhile, a company like Veeam, that is a giant and a powerhouse, goes out of its way to not only make an amazing product, but also is incredibly involved with their client community, includes them in the decision making process through the Veeam Legends and Vanguard programs, and goes out of their way to make sure their customers know they are heard and cared about. I have so much respect for 

I had a co-worker who is blind. One of the things that was really frustrating for him was images, and especially images that do not have an ALT text or a description below. Some do have an ALT text like “logo 322kb” but that does not describe the image.As you might have noticed when I post an image here on the community hub, I try to describe the image below the image in the Caption. Currently this platform does not support ALT texts, so next best thing is using the caption below the image. From what I have learned from him, try to describe the image in the ALT text/caption as complete as possible. For example, do not use things like “Veeam logo” but use “Veeam Company logo; contains text VEEAM in white with a light green background” or “Picture of my cat” but “Picture of my cat attacking a laser light” Adding a caption on the Community Hub is easy:

Hope this thread don’t breaks any rules BUT.We all love Veeam, right?Legends and Vanguards apart, that they already have super fancy socks too, all of us want some Veeam swag, right?Maybe free, right?YOU GOT THIS.  Until January 15 2022, there’s this contest.Just:Register on that page Share some Veeam Love on socials and use hashtag #VeeamandAWShttps://bddy.me/3pgerCMAll participants will receive a T‑shirt, magnets, stickers and playing cards.

Happy Friday everyone! For those of you with access to a lab/test environment, what do you use when you’re “on the move”. Maybe it’s public cloud, maybe a VPN back to a DC/Home, maybe it’s a portable enough workload you can run it from your laptop. Curious to hear how people tackle this when mobile 🙂

Hey all.  Using Veeam Backup and Replication 11 we backed up some files using a files to tape job as a once off outside of our normal backup routine.When I look at the properties of the tape I can see the individual files listed.However when attempting to restore an individual file I get the following:Can I not select individual files to restore?  Do I have to restore the entire tape or am I doing something wrong?thanksjc

- 1 to many destination replication job- ability to resizing the replication job menu/console- when I edit replication job and go to virtual machines tab, I wish to have more info of the source VMs presented like (cluster, vcenter, etc). it is helpful when you have the same VM name in multiple vcenters. 

Most of you are following the twitter saga. Politics and other issues aside I wanted to address one leitmotif brought forward by Musk and his horde of sycophants. Numerous times I have seen the argument “time to fight IT entitlement” used as a battle cry before performing massive layoffs. I have worked in IT for 20 years and while I have encountered some bad apples, on the whole the majority of Engineers and IT tech folk have been hard working and diligent people. I was working abroad from North America for 16 years and I was shocked when I returned to see the level of C Level, CEO etc entitlement. The salaries of this class of worker (and remember we are all a team as they love to say in the meetings!) had in my opinion unjustifiably skyrocketed to levels their predecessors could not have dreamed of. Inevitably to justify such a situation one must find a scapegoat and the hard working IT tech folks are an easy target.Or are they?My buddy and fellow Vanguard 

Happy Friday everyone! To those that don’t know, when you create a Scale-Out Backup Repository you can configure it to automatically create a new full backup if a required extent is unavailable. I had a few conversations recently whereby I was the only one endorsing this option. So I ask, who uses it, who doesn’t, in both scenarios, why?  

Hi Folks, I know some of you were planning taking exams from the Linux Foundation (Linux, Kubernetes etc) and they are normally quite pricey! Cyber Monday is one of their biggest sales up to 65% off which for people on a budget is no small deal. I am thinking about attacking the PCA next :)  https://training.linuxfoundation.org/ cheers Geoff

HI Everyone. I seem always to be doing at least 2 IT courses at the same time. The reasons are many but I can enumerate a few: One I enjoy IT :), Two I am worried about getting behind, Three I want to get ahead, Four I am addicted to getting the course completions certificates and certifications because it makes up for my years of goofing off in grade school and all but the last year of High School. Back then teachers were not very politically correct so I was called a moron, a pain in the a, imbecile, lazy, annoying and many other attributes which in today’s world would land the teacher in court :) . This obviously inflicted me with deep impostor syndrome whenever I find myself sitting at a table with smart folks :).So I am always doing courses. Now no one really pays you do do courses so you have to somehow fit them in with the boring stuff. i.e. work. I have a few tricks but wanted to know if you had any as well. For one thing on most courses you can t

I am happy to announce that my new book “Dell VxRail System Design and Best Practices” is available to pre-order on the amazon website now. This book contains the different topics, e.g. Veeam. You can pre-order at the link below if you are interested. Thanks to @Rick Vanover, @NikolaPejkova approved me to join the Vanguard program in 2019, then I can learn the knowledge of Veeam products from this great community. And also thanks to @Chris.Childerhose recommendation for this book. This book will publish in Jan 2023.  Table of Contents of this book:Overview of VxRail Appliance 7.x System Benefits of Hyperconverged Infrastructure Design of vSAN Storage Policies

Sorry if this appears twice. I thought I had created the question, but cannot find it.Veeam backup&restore has an application config file that is protected by a password.How to I test this password? I do have something written but I want to prove it is correct.I’m hoping to do this without installing a new copy of the applicationMany thanks

I swear I’ve seen some posts about this but can’t find them.  I haven’t dipped into the Linux Hardened repo’s with immutability yet, but one of my engineers recently set one up for a client, but as a copy repository.  I’m putting together a proposal to replace our internal Synology NAS that is our primary repository with a Dell PowerEdge R550 with a fair amount of local space (8x 8TB disks in RAID 5 or 6) connected via 10Gb or 25Gb links. Backup data is currently copied to a SOBR at a remote site that is using a Synology NAS and Wasabi for immutable object storage.  Right now the primary site is keeping 30 days of Forward Incrementals with Active Full’s with no GFS retention, but I plan to ramp up some more retention locally at some point as I ran into space issues a few months back and ended up doing all of my GFS work on the copy repo at the remote site for the time being.Any gotcha’s I should be looking out for this sort of configuration - primarily in regard to using a ha

Email notification is working but I was recivinig somthing like chines letters and i try to fix it with dis article KB2692: Notification emails from Veeam Backup for Microsoft 365 are sent in an unexpected language , and now test mail is working and whan the backup job is finished Veeam Backup for Microsoft 365 in action many said that email notification is sent, but I dont recive any emails.Help ?

Hi all,Our setup is currently as follow: Veeam server in seperated VLAN, guest processing is now running with VIX with the domain\administrator account.Regarding the KB we must use the administrator account as it has the -500 at the end of the SID.For safety purpose we want to disable the global domain\administrator account and use another domain admin. Since I change the account, the backup jobs failing because of failing guest processing.When I test the guest processing, the difference is that administrator successfully can make connection with Guest OS via VIX (after failing over to backup server for guest interaction). Another account fails at this step as well.I could open 445 between the VLANS’, but I’m not sure that I break security if I do so.Are there best practise available for this kind of setup? Disabling UAC would not be the best op

hi there, the last couple weeks i face a weird issue which i will describe below.i have Veeam B&R installed on a physical domain joined server 2012 r2. up to now i was able to add all other servers in the infrastructure (one more physical server 2012 r2, some VM servers 2012 r2 and a Azure file server 2019) without any issue.even a remote non domain joined server over a VPN connection.my issue is that i cannot add a non domain joined physical 2022 server located on a remote site which we have VPN connectivity, as a standalone server. need to add it as we are going to have a VN running there.please see attached, thank you in advance for your assistance.ps: i can ping the server and credentials are tested and working just fine since i can connect to that server using RDM

Happy Friday everyone, Interested to see people’s opinions on this subject. RAID for backup storage, most (I really hope all) organisations will use RAID for the storage underlying their backups. But, what type of RAID do you typically use, and why? Vote in the poll and then share any particulars below. For example, if you use RAID 60, but choose to have 4x stripes vs 2. I want to add, there are no right or wrong answers (even you RAID 0/ No RAID brave people!), but there’s always a reason behind the decision, were you after maximum density, improved write vs read, maximum durability, reduced durability due to multiple copies etc.

I am currently using Veeam EssentialsOur HCI is Nutanix and we have roughly about 28 VM’s on itWe are currently evaluating Proxmox VEHow can i restore full Backups of my critical VM’s to the Proxmox VE? 

This weekend happens an Issue on a Copy Job on immutable repository:XX/XX/XXXX 01:02:07 :: Agent: Failed to process method {Transform.CompileFIB}: Input/output errorPOSIX: Seek operation has failed. File: [/XXXX/backups/BACKUP_COPY_JOB_XXXX/BACKUP_JOB_XXXX/BACKUP_JOB_XXXX.vbk]. Distance to move: [504738922496]. Move method: [SEEK_SET]. XX/XX/XXXX 01:09:00 :: Unable to apply retention policy: failed to delete backup files Error: Input/output errorFailed to get file system object info: '/XXXX/backups/BACKUP_COPY_JOB_XXXX/BACKUP_JOB_XXXX/'Agent failed to process method {FileSystem.Exists}. Now I see the repository as Unavailable and if I try to rescan it and I receive the following warnings:Failed to synchronize REPOXXXX Details: Input/output error Failed to get file system object info: 'XXXX/backups'. Agent failed to process method [FileSystem.Exists].

We have a location in the US where our VBR server in DE seem to have some connection issues sometimes. Latency and packet loss I see in smokeping is not that high, even better than for most of our other remote locations. Still we see errors like below in out backup and offload jobs for 2-3 VMs out of 35 on a daily base. The IP is the local proxy there. Processing xxxx Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 172.31.132.113:2508   First job retry is successful most of the time. Anyhow, I’d like to get rid of those errors. Support suggested to change following regkeys to adjust.ConnectByIPsTimeoutSecAgentStartTimeoutSec But this did not change anything. I think we need settings for retries not timeouts. Any other ideas? Network team already checked everything and did not

Hi,I have a problem with add an organization on veeam Back EM with API.I certainly enter correct “HostUid” that belong to vcloud, but get below error:"FirstChanceExceptionMessage": null,    "StackTrace": null,    "Message": "Unable to find target vCloud host on VBR [25fc543e-0622-4dce-82ff-ee6296bb397c]",