Discussion Boards

Hello,I have upgraded "Veeam Backup and Replication Community Edition" from v11 to v12 and "Veeam Agent for Linux" from v5 to version v6.0.0.1060.Since then, I receive no more Backup Status mails from any Agent running v6.The only status mails I receive, ist for a Windows client with Agent version v5.0.3.4708.I have already checked the notification settings on the "VBR" several times. Various test mails are delivered successfully.Does anyone have similar problems after the upgrade, or a solution?I would be very grateful for any feedback

Hi, i need and advice on how to configure Veeam v12 where i would like to setup immutable repository where i would put the last 7 backups and in the same time have that same backup copied on DellEMC DataDomain were i have GFS with for example 7 daily / 4 weekly / 3 monthly. I know that with SOBR i can make performance (immutable) and DD (capacity tier), but will it delete/move the data from immutable repo.

I ran several V12 updates through our Service Provider Console and just wanted to make sure that anyone else running these upgrades watches for this issue as well.  The issue being, when you push the update and it updates successfully, check the results to make sure that it reenabled all backup and copy jobs at the end.  I had a handfull of upgrades where it stated the upgrade was successful, but in checking the logs, the update didn’t reenable a couple of jobs at the end.  It seemed to me mostly copy jobs, but I had at least one or two backup jobs as well.  ​​​​Veeam Service Provider Console log results for upgrading a VBR server to v12 that indicated success in the upgrade but failed to reenable jobs afterwords. One other thing to look out for is that when you update, make sure that the client isn’t copying data to a VCC provider that isn’t yet on v12 (looking at you 11:11 Systems/Iland).  In that case, copy jobs will now be broken and won’t run until the provider has updated their e

Hi guys, It is (again) that time of the year: 31/03/2023 is world backup day.What is “hot” nowadays: AI. Join me in the challenge and come up with some Veeam Action Figures.https://www.linkedin.com/posts/stijn-marivoet-3695a48_veeam-backup-worldbackupday-activity-7047497640883691520-c8qa?utm_source=share&utm_medium=member_desktop   

What do you guys do in your VMware environments for VMs using CDP or replicas? Once I have a bunch of snapshots at the DR site vCenter likes to give nice little red alerts. Other monitoring systems tend to remind you that there are too many snapshots too. I found the easiest way is to disable that alert at the DR site, but I have to be manually monitoring my environment to make sure an unwanted snapshot doesn’t get left behind somewhere.  

Hello community members! Tomorrow, March 31st, is World Backup Day! Who better to celebrate this occasion with than Veeam?  Join Veeam’s Product Strategy and Industry Insights team tomorrow on LinkedIn for a talk about the importance of backup. Let’s see the community active and engaging in the chat tomorrow! 🤗And don’t forget to take the backup pledge & see other resources on World Backup Day’s site! 🌐 

Folks, Please don’t post brain dumps. You are not only cheating the system but also yourselves. I have had to deal with paper cert folks and believe me they don’t last long. The exam and the piece of paper are not the point. It is the process and the knowledge that is what you want. At 1 am when sitting there clueless on a severity 1 call your brain dumps will be of no use. cheers

Final week of March is here!  We had previously committed to organizing a poll to determine the top blog of the month that is going to be featured on the homepage in the first week of April.Our selection comprises of three blogs that were featured in the weekly recap, as well as three additional blogs that were not mentioned. Please help us determine the best by voting on your favorite one by the end of the week (31st of March) .Good luck to all participants! 😊  @Michael Melter , @mkevenaar , @marcofabbri , @regnor , @Martin Weber , @wolff.mateus   please feel free to share it on your social media platforms and encourage your network to vote for you!Best, Madi  

What does " Warning: Task was not processed in the current session " mean? I receive the warning after it tries to run a backup copy job.  Any advice on what this means, why this happened, or how to solve the issue?I get the same message after running a new sync after about 10 minutes. Job will finish with warnings, with no successes. 

Trying to migrate Enterprise Manager to a new Server. I stopped the Veeam services on the old server and disconnected it from the network. I installed the EM on the new server and pointed it to an old DB that was used by the old server. There was a dialogue window confirming that the DB was owned by the old EM server and that it would be transferred to the new EM server.What happened next is that the the service account was getting locked out. So I had to roll back the changes. Good thing, I did not uninstall the EM from the old server per the instruction on https://www.veeam.com/kb1889 . Curious what happened here.

Hi All, I have recurring intermittent issues with restoring VMs. Host machine is Windows 2016 Hyper-VWith VMs ranging from Windows 2012 r2 to 2016 server.I am not getting any errors reported in the backup or restore process, but what i find is on starting up the VM a database might be corrupted. This can range from NTDS, DHCP, or single exchange databases.I have noticed that if i do a restore of just the disk file, instead of a full VM restore that the VM will then work fine.Backups are made to a set of rotated USB hard drives, however, issues still occur when the files are copied to a local hard drive.We were running an old version of 9.5 but have since tried community editions of 11 and 12.Anyone have any thoughts? Im guessing it might have something to do with replaying transaction logs?

Likely a noob question, but just want to be sure things aren’t broken.I’ve got a setup with Veeam B&R Community Edition on a single windows machine. I have full backups scheduled weekly, and daily backups every day, to a Quantum LTO-7 drive, using LTO-6 media.The console reports the total capacity of the tapes as 2.1TB. Allowing for the whole base 10 / base 2 argument, this is what I’d expect. The full backup (done last night) reports total transferred is around 1.1TB, but the tape is only reporting around 250GB free. I’m expecting around a TB free (2.1TB - 1.1TB). You can also see that the “daily” tapes are reporting 2.1TB free (again, this is expected - there’s not a lot written, maybe ~90MB per day, so not enough to make a difference to the free space reported)Is there something amiss somewhere, or am I going to have to migrate to LTO-7 media a lot sooner than I thought?  

Hello, I have a query.In a scenario with large mail files (OST and PST) that only change partially.Is there an option in Veeam Backup to only copy the part that has changed?How does deduplication.Does Veeam implement this functionality?Thank you for your attention.A greeting.

I am having a hard time trying to migrate our Veeam365 (azure marketplace image) VM in Azure to another subscription, due to Microsofts restriction regarding move VMs with a plan attached. My latest idea was to use Azure Recovery Service to replicate the vm, and then do a permanent failover. The ASR supports cross-over subscription so it would do the job.When doing the failover, I get an error saying that I need to accept the terms of the image vms.This should be done with the azure cli command: az vm image accept-terms --urn veeam:office365backup:veeamoffice365backup:3.0.0have also tried with the subscription id in the paramteres, but the results is the same:The VM image can not be found. I guess its because its an older vm-image which Veeam now doesnt offer on that azure marketplace. So where can I go from there..? I am starting to perhaps use Veeam for this just case but before spending more time it would be great to now if this Plan paramteres is somehow following the imagedisc in

I sort of understand backup and recovery...but if you have data, you have data, no? What were the reasons you use a backup or recovery service? I don’t understand what problems it might solve

Is there a way to filter out jobs that are disabled? I don’t want to see failures for these in VSPC.

Hello, Just getting into Veeam. Trying to install VeeamOne agent on my Veeam B&R box from my standalone VeeamOne server. However, it keeps failing out. I’ve tried unloading any anti-virus, disabling firewall. I’m running it using administrator credentials. It is not domain joined so it does not have any odd security policies. I’m using ComputerName\Administrator for the installation account. I looked at errors 1639 and 1708 but it provided little help. has anyone seen this or know a workaround?=== Verbose logging started: 3/24/2023 15:57:11 Build type: SHIP UNICODE 5.00.10011.00 Calling process: C:\Windows\OneAgent\Veeam.One.Agent.Deployment.Service.exe ===MSI (c) (20:A0) [15:57:11:775]: Resetting cached policy valuesMSI (c) (20:A0) [15:57:11:775]: Machine policy value 'Debug' is 0MSI (c) (20:A0) [15:57:11:775]: ******* RunEngine: ******* Product: C:\Windows\OneAgent\OneAgent.x64.msi ******* Action: ******* CommandLine: **********MSI (c) (20:A0) [1

Hello guys, I'm looking some informations about Virtual Tape Library (VTL) and I wanted to know if some of you use this technology and why ? 

Prior to upgrading to Veeam V12, ensure that, "Transform previous backup chains into rollbacks" is not enabled in your environment. If it is, the upgrade will fail as per KB4390: Feature Deprecation: "Transform previous backup chains into rollbacks" (veeam.com)I just wanted to point out a slight caveat when checking our environment. If you decide to check each job setting and disable the option, bear in mind, if you have a snapshot job with storage integration, it may still show as enabled. Normally a snapshot job looks like as follows without an option to select the backup chain option: However, running the PowerShell command:Get-VBRJob | where {$_.BackupTargetOptions.TransformIncrementsToSyntethic -eq $True}returns the following: This can be easily sorted by running:Set-VBRJobAdvancedBackupOptions -Job "Job Name" -TransformIncrementsToSyntetic $false 

Hello,As I’m doing Backup Copy Jobs to second location I think it would be good to have Veeam B&R on that site also if somethings happens with primary location.For me I would need advice on licensing the second Veeam B&R.My primary Veeam B&R is on the primary site so If everything goes down there is no way to restore VM’s without it.

I have installed Veeeam Backup V12 Community edition on a local Windows 10 PC.  I have a 4TB external USB drive connected to this machine that I intend to use as a backup repository.The local machine uses a VPN connection to connect with a shared windows server 2019 drive located on a remote server. The connection is always on.In my reading across various forums, Veeam seems to the the product of choice to accomplish this. The tutorials I have read thus far appear to target a much higher level of backup sophistication (VMs, Hyper* and whatnot). Can anyone please advise or point me in the right direction to accomplish this somewhat trivial task?Thanks

Hi,I’ve enabled encryption on repository which allready contain some backuped vm’s.Does the data allready stored on that repository also will be encrypted or only new one ?

One of the great features we’ve gotten with V12 is object-lock with Azure S3.@Rick Vanover did a great walkthrough for MS Ignite last year with a V12 beta already.With new storage accounts and containers it works as he explained, which I could prove in a few environments already. My (and some of my customer’s) question now is: can we enable it safely and supportedly on an existing blob bucket with let’s say hundreds of TB of data already inside? First, you would have to enable “version level immutabilty” within the container: Quite easy while creating a new container like Rick has shown, but if you would want to do this afterwards, you first had to enable a policy on the container: Having this policy also makes the container differ from a freshly set-up immutable container. The latter would not have this policy.To add this policy one would also have to enable versioning for the storage account beforehand: I tried that in a testing environment and ended up being able to activate immutab

Hello, it’s about Veeam Backup for M365.would it be possible to start a backup job automatically when a previously specified backup is completed?For example:I’ve a Backup Job which safe just Microsoft Teams on a Server A.So when this Backup Job is finished, then start automatically the second Backup Job with Microsoft Teams on a Server B.

I am sure many of you don’t have access to a lab for testing and showing how Veeam works but I found this little gem which is a site that has clickable demos of different parts of Veeam.  It shows how they work, etc.So you could use this when you don’t have access to a lab or environment to show a customer/client, etc.https://veeamclick.beCheck this out and bookmark it!