Solved

Hi all,A customer’s device is complete gone, but has daily full backups stored via CloudConnect in Wasabi. When we try to import the backups, it gives the message ‘No backups found’. Altough, the Cloud Connect server gives usage of the bucket and de job just ran fine. Any ideas how to import the backup in the Cloud Connect server to start the recovery ?  The import of the backup doesn’t seem to find the backup chain….  

hi i install kmod-veeamsnap-6.1.2.1781-1.el7.x86_64.rpm veeam-libs-6.1.2.1781-1.x86_64.rpm veeam-6.1.2.1781-1.el7.x86_64.rpm on linux centos 7but when run Job i see this error *****************************************************Failed to install Veeam Agent for Linux: error: Failed dependencies:    fuse-libs is needed by veeam-6.1.2.1781-1.el7.x86_64 Failed to invoke rpc command  ****************************************This system does not have internet access and I have to install this manually. What version of fuse-libs should I install?

Hi, I have a question. I recently added an object storage repository (Cloudian) with an immutable retention period of 7 days. Then, I created a new backup job and pointed it to that repository, and I ran the backup. After the backup job completed, I checked the object files in Cloudian and looked at their retention period, and the result shows more than 7 days. Shouldn't it be exactly 7 days, not longer?Attached is the screenshot:Repository config for immutable days The date when the first backup started The object retention displayed in Cloudian Management The 'retain until' date should be 2024-11-14 if the retention is set to 7 days, but this is not what is happeningCan anyone explain how Veeam sets the immutable days for objects in object storage? Thanks for your answer and attention😊

When can we export the 1.1.1 release to Excel? It is helpful when we are calculating many repos at the same time

How VRO works on GCP as supposed entire environment hosted on GCP.

After taking the manual snapshot on GCP it is going to another zone this behavior of Veeam or GCP as per my understanding the manual snapshot will always save the snap in a multi region location closest to the VM.

Data drive of the backup server has two folder Backup Job 7 which has backup from Oct to Nov and XX-Backup job from Jan 24’ What would be the correct process to delete the backup jobs from CZ60-Backup job from Jan 24 

We need to install the Veeam agent on 2,000 devices within the organization, but centralized file restoration to multiple devices simultaneously is required. Currently, the Veeam Backup & Replication solution does not have this functionality, and it is needed to reduce restoration times for user operations to ensure business continuity in case of ransomware or disaster.

The company I work for is looking to improve its BCDR capabilities utilising Veeam and Azure.  Currently in a DC we have VBR (physical server with local storage repo) copying to Azure blob storage and Enterprise Manager on a vm.  We are aiming to change the Veeam license to include VRO with the idea of being able to stand up VMs in Azure in the event of the DC going down.  My questions are about the placement of the various components.  Do we need a second VBR server in Azure?  Should the Enterprise manager be shifted to Azure?  Would it be best to build the VRO server in Azure?  Also where does ONE fit into this?  We are talking to an MSP about getting this set up but wanted some advice from the expert community to put my mind at ease.  Thanks!

Hi everyone,This is my situation: i configured a backup job on Veeam 12 on rdx drives; i ve got 3 drives (4TB each) and the total size of vms backup is around 1,6 TB; drives are changed daily.My goal is to make an incremental backup, veeam perform each day a full backup tough. So the third day the drives is put in the rdx reader  veeam gives me error because the storage is full.In repository settings i marked the rotated drives options. If i set the retention policy to 2 days nothing changes (because veeam policy always keep at least 3 restore points i guess).I tried also reversed incremental with no result. Is there any chance to manage an incremental backup on rotated drives in my situation?The best option would be to have in each drives a full backup + x incremental file, at worst i may configure a pre-job script to manually prune one of the two full backup on the drive. David

Good day all,Hostnames and IPs are ficticious, just to protect my environmentCase:N.B. Primary veeam server was off during the config restoration. Both servers can resolve hostnames to IP, full communication between sites/on WAN, same domain as well.I used (Site1) primary veeam server “veeamserver1” backed up .bco file and restored it to (site 2) secondary veeam server. “veeamserver2” After restoration on veeamserver2, RED X came up on both hosts and repositories.On veeamserver 2, I did a rescan on on hosts and i got error(all hosts) for below:-Error - [Serverhost1] Disks and volumes discovery failed Error: Access is denied.  RPC function call failed. Function name: [GetSvcVersion]. Target machine: [192.168.40.30:6160].-Host discovery failed For the local repositories rescan i got error below: -Error    Processing backup repositories Error: Selected server Veeamserver2.JPOL.LOCAL is unavailable.-Warning    Failed to synchronize Site1Repo Details: Selected server Veeamserver2.JPOL.LOCAL

Hello,I am trying to do a bare metal recovery of a physical windows server 2019.First, I have created a recovery media from the agent backup, then mounted that .iso on the Dell Idrac9 and tried to boot form virtual CD/DVD/ISO, but it’s getting stuck at the windows logo screen.I have also tried to boot from the same iso on a VM just to test. This time, it worked, the veeam console came up and  I got all the options for restoration. But on the physical server, it’s not working.Please let me know where I am going wrong. I have attached the screenshot of the stuck screen. Thank you.

We have facing issue with exchange server backup with AAIP. Disabling AAIP , backup will work Error :Failed to inventory guest system: Veeam Guest Agent is not startedFailed to prepare guest for hot backup. Error: Cannot connect to remote SCM database. Machine Logs:Error Veeam Guest Agent is not started (System.Exception) Error Failed to inventory guest system: Veeam Guest Agent is not started Error Failed to invoke guest call Error Cannot connect to remote SCM database. Machine. Requested rights: [0x8000000]. Error Win32 error: Access is denied. Code: 5 (System.UnauthorizedAccessException) VBR v12Proxy servers are LinuxGIP server is linux server and is not a backup proxy and credential test passedVBR server and other proxy servers are not in domain Please advise. 

Trying to get K10 working with linkerd service mesh in a test cluster.Prior to deploying linkerd, k10 is working ok doing csi snapshots (Rook Ceph provider) and mysql logical backups (using the kanister example) with backups going to a minio cluster living in its own namespace.I have mesh enabled on the k10, minio and vaultwarden namespaces (testing using vaultwarden as I know it quite well and it uses a database). mysql logical backup is temporarily disabled. Unfortunately, k10 export fails:k10 appears to come up fine - no errors - all pods communication with each other - ui works fine vaultwarden works fine backup csi snapshot works fine backup export to minio fails with error (clip below)status: state: Failed startTime: 2023-02-28T09:58:27Z endTime: 2023-02-28T09:59:26Z restorePoint: name: "" result: name: "" error: cause: '{"cause":{"cause":{"cause":{"message":"Failed to exec command in pod: Internal error occurred: error executing command in container: failed t

Since a few weeks, my backup of my Windows disk (that used to work seamlessly) fails with:Error: Shared memory connection was closed. Failed to upload disk. Skipped arguments: [EmulatedDiskSpec>]; Agent failed to process method {DataTransfer.SyncDisk}. Exception from server: The size of the internal FIB block (58368) cannot be less then the default block size (1048576). Failed to download disk 'a289c469-b376-11ec-83e5-68545a920099'I could not find this particular error message online. How can I get it to work again?I use Veeam Agent for Windows 6.2.0.121.

I have a customer who is using Veeam to migrate some VMs from one Vcenter environment to another.  He has set up two virtual proxies, one on the source Vcenter and a second on the Destination Vcenter.   Each Proxy VM has 24GB of RAM and 16 vCPU’s.   He has set Max concurrent tasks to 20 on both proxies and has a green check mark on that.   He set up a job with multiple VM’s with each VM having 2 disks.   The job is only processing a max of 4 VM’s at at time.   I am thinking it should be able to do at least 10 VM’s (10 x 2 disks = 20 concurrent tasks).   Do VM replication jobs use more concurrent tasks than a single task per disk?  

Being new to VEEAM, I might be troubleshooting problem that's trivial for VEEAM experts.On Veeam 12.2 and vCenter 8.0.3, my problem is ESXi hosts having multiple networks which causes Veeam's confusion. There's management network and there's vMotion network. The hosts in vCenter are defined as follows:The problem is, Veeam isn't able to back up a single VM. The log is full of these errors:22.10.2024 11:17:51.481] < 1436> vdl | [vddk] CnxOpenTCPSocket: Cannot connect to server 172.16.0.13:902: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond[22.10.2024 11:17:51.481] < 1436> vdl | [vddk] CnxAuthdConnect: Returning false because CnxAuthdConnectTCP failed[22.10.2024 11:17:51.481] < 1436> vdl | [vddk] CnxConnectAuthd: Returning false because CnxAuthdConnect failed[22.10.2024 11:17:51.481] < 1436> vdl | [vddk] Cn

running a lab to test veeam v12.2 with storeonce VSAs. No firewalls, flat network etc. Simple stuff.Backup test works then the copy (storeonce stores copies) fails with:Backup copy was cancelled: ServerIncorrectAddressOrProtocolIts all IP based, single NIC, all options allowed for storeonce NICs too….any ideas?? Odd one if you ask me

Hello; I have a question.I installed a new version of VBR 12.2 3 days ago.I registered a tape server to use a tape device (IBM 3573-TL 1610).This device contains 15 LTO9 devices. I registered the tape server for the first time, and I did an inventory.But 2 LTO devices failed to inventory. The error message is as follows.2024-10-24 오후 5:56:37 Error    Failed to inventory tape A00091L9 Error: Failed to call RPC function 'GetDriveActivity': Access is denied. Problem with CreateFile by path \\.\Tape0.2024-10-24 오후 5:56:37 Error    Tape initialization is in progress. Backup job will continue after the initialization has been completed. Drive 1 (Server: DR-S4-VEEAM, Library: IBM 3573-TL 1610, Drive ID: Tape0)2024-10-24 오후 6:06:16 Error    Tape initialization is in progress. Backup job will continue after the initialization has been completed. Drive 2 (Server: DR-S4-VEEAM, Library: IBM 3573-TL 1610, Drive ID: Tape1) I redo inventory the 2 failed devices and now I see them as normal.What I'm c

Hello,I was wondering if some of you have already try to play with immutable repository for backup job in Veeam for M365 v8.I want to try the governance mode but I not sure how to test it properly…I use a Wasabi bucket set with versioning and immuability. In Veeam I created my repository with the following parameters My backup worked properly Now I want to test the immutability. But I'm not sure to how to proceed.In wasabi console I tried to delete the bucket directly, I got the message: Okay, I decided to delete the Veeam folder and tadammm the folder has been deletedThe bucket should be empty so I relaunch my job, I though to have a new Full backup, but no. Veeam create an incremental… Strange….Now I want to try to delete some data from Veeam but except with powershell it’s not possible.I’m looking a cmdlet to delete all sites in my repository.​​​​​​​

How can I back up our Proxmox Ve cluster environment to Cloud Connect Service Provider storage? With VMWARE and Hyper-V I can choose from the Cloud Connect repository that has been created, but when I create a backup job for Proxmox this is not available to me. Does anyone know why? Is there a solution?

Hi Guys, I wonder if I can get some help on this one. I have the Veeam One report showing VM Snapshots older than 3 days which is showing snapshots that have long been deleted. Does anyone know if there is a way to kick Veeam One into recognising that they have been deleted ?I’m thinking a SQL query to clear a table in the DB that has got stuck or something like that ?Any help greatly appreciated.ThanksPhil

Hi, I’m running Veeam B&R CE on my home server and plan to upgrade from Server 2022 to 2025 when that come out.  I would like to do a clean install of 2025 and was wondering if there’s a way to backup my install of Veeam so I can reinstall it on my upgrader Server 2025 (eg., the configurations, databases etc.  The backup repositories are on separate disks and so will be directly accessible). Thank you

Hello,I'm little bit confused about the differences from disaster recovery & export import in Kasten K10. Does disaster recovery use export import right?For export import, do we must use same location (repository) between source cluster and target cluster ? Thank you 

We want to restore a SQL Server database within a small window, so that there is minimal downtime for transferring usage from the old database to the new database. With our previous backup software (Backup Exec), we used to restore the full backup and leave the database in recovery mode, then restore the differential backup on top of that, still leaving the database in recovery mode, then restore the transaction logs up to just before the downtime period, still leaving the database in recovery mode, so that, once the downtime commenced, we would only have to restore a couple more transaction log backups to bring the database up-to-date with the source database.We are struggling to find a similar option in Veeam. We have 2 support calls open, one attempting to see if we can use a similar method to the above, and one attempting to see if Instant Recovery is the solution to this.- for the first option, it appears that Veeam cannot append any restores to the original restore - it simply of