Solved

We have a location in the US where our VBR server in DE seem to have some connection issues sometimes. Latency and packet loss I see in smokeping is not that high, even better than for most of our other remote locations. Still we see errors like below in out backup and offload jobs for 2-3 VMs out of 35 on a daily base. The IP is the local proxy there. Processing xxxx Error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 172.31.132.113:2508   First job retry is successful most of the time. Anyhow, I’d like to get rid of those errors. Support suggested to change following regkeys to adjust.ConnectByIPsTimeoutSecAgentStartTimeoutSec But this did not change anything. I think we need settings for retries not timeouts. Any other ideas? Network team already checked everything and did not find anything. As I wrote, monitoring graphs also do not look too bad.

Hi,I have a problem with add an organization on veeam Back EM with API.I certainly enter correct “HostUid” that belong to vcloud, but get below error:"FirstChanceExceptionMessage": null,    "StackTrace": null,    "Message": "Unable to find target vCloud host on VBR [25fc543e-0622-4dce-82ff-ee6296bb397c]",    "StatusCode": 500,    "Status": "InternalServerError" Sent body as below:{  "OrganizationName": "Org-01",  "BackupServerUid": "urn:veeam:BackupServer:25fc543e-0622-4dce-82ff-ee6296bb397c",  "RepositoryUid": "urn:veeam:Repository:a3718da3-2b89-4646-a5d4-df6dada65d8e",  "QuotaGb": 100,  "RepositoryFriendlyName": "Backup Repository 1",   "JobSchedulerType": "Full",  "HighPriorityJob": false,  "HostUid": "urn:veeam:ManagedServer:425c2582-d46d-4316-9977-a3e5f49ec1f9" } P.S 1 : I can add it in web UI successfully.P.S 2 : All parameters that sent to veeam, taken from “Get” APIWould you please help me in this regards?

Hello, We’re trying to make a backup on a server using Agent but we’re facing this error message. 

I wanted to ask any Service Providers out there that may use tape with Veeam - do you have sizing set up so that when you have X number of Tenants you add tape drives or another tape server?I am working on our design for our Veeam VCC to Tape offering and I am trying to put together some rough estimations of when you have X number of tenants on VCC you add either - X number of tape drives more or add a second/third tape server to the mix.We have currently 47 tenants with one tape server which had 3 tape drives connected (now it is up to 6 as we added 3 more yesterday) but it still seems to be a bit of a headache due to the number of jobs running plus when a Restore request comes in.Hopefully someone has experience around this as I have also asked our SA at Veeam as well to see if there is any documentation, they have similar to the limit's spreadsheet for VBM365 which is great.Thank for looking and chiming in. 😁

Hi,I was wondering where the “Cluster ID” comes from that is provided in the UI when enabling Disaster Recovery in the Dashboard. Is it saved to a Kubernetes resource and is it possible to retrieve it from the Kubernetes API?Kind regards

other components like granafa also have this issueWe use rook-ceph as storage class

 before today everything was fine,  i have actions stucked in pending state, when i am trying cancel action i am getting this error message:Connection ErrorRequest failed with status code 500 (dashboardbff-svc)    Stucked Actions:  logs of dashboardbff-svc’s pod     

Hello,we want to change the naming of the media sets in our tape media pools and encountered a situation with the available variables.Our goal is to include date and time in the media set name in format ”yyyymmdd_hh:mm”The variable %date% gives date and time in the format “dd.mm.yyyy hh:mm” (ok, the date format is based on the system locale). But we cannot change the system locale for this…. 🙁With the variables %year%, %month%, %day% and %time% it should be possible to build a date_time string in the desired format. But unfortunately, the value of the %month% variable is the name of the month, not the numberDoes someone have an idea or a trick how to get the number of the month? Are the variables configurable? Just asking all the experts here before opening a support ticket. 😎 Documentation mentions nothing about this…https://helpcenter.veeam.com/archive/backup/90/vsphere/add_media_pool_set.html Please forget my question 😂😂😂You should look at the documentation for the correct vers

So in B&R v12 it is possible to directly backup to an object storage - same is valid for the agents if I’m not mistaken. Testing the current beta hasn’t given me that option to choose an object storage as target repository, so I guess it can only be achieved in combination with B&R? Or does it still have to be developed? Thanks!

For an our customer I will have to integrate the backup of VM replicated by vSphere replication software, some one have tried to do this ? There are known issue or limitation ?Thanks  Luca

Hello, Team So, i was trying to restore data and my restore keep saying my proxy is offline. THe communication is good and the services are running. Community on the actual port is good. I need help and it is important that this is sorted on time. See screenshots below:   

Hello,I am in the process of trying to migrate about 7 applications within a single namespace to a new cluster.  I have the backup/exports [references only] from the source working and I can import on the destination side. Question(s):Can you transform ALL (deployments, configmaps, secrets, statefulesets, pvc, daemonsets) resources with a path of “/metadata/namespace” to something new, while doing the auto-restore? Without doing one application/resource at a time Is there a way to set the Transform subject to multiple items? Assume the answer is no but…. Environment:K8 on-prem source: v1.21.1 destination: v1.24.2 K10 v5.0.4 (both) Shared S3 bucket between both K10 just for migrations

Hola.. me gustaría saber como puedo garantizar que las copias que hago están limpias de virus porque de nada me sirve el 321 si las copias están ya infectadas.. además puedo comprobar que la copia se ha realizado correctamente?¿ Gracias

Hi We have a Dell T130 RAID 5 - 4 X 1TB  Drives No hot spare - DELL PERC H330 Adp SCSI Disk.What is best practice to back this up with Veeam ?Regards

Happy Friday everyone! I was having a chat with @regnor yesterday and we were getting a bit sarcastic about the gap between new products and how long it takes for them to have a proper data protection option available (Teams Chat API is a great example of this!). So I thought this might be a bit of Friday Fun.I want you to market data loss, like it’s a good thing! Whoever’s gets the most likes is the funniest and wins being the “answer” to the question (for those sweet sweet community points!) Scenario: You’ve just lost all your company data and you’re about to tell the board, what do you say? Example: “You know last month I was complaining about our tech debt? Well… it’s gone now!” Now your turn! And be as silly as you like, it’s fun Friday after all!!! 😁

Hello everyone, it’s correct that concurrent tasks limit on the following repositories depend on the hardware (CPU/RAM) of the gateway server (transport server):DataDomain connected in FC to gateway servers with 16 cores and 32GB RAM Immutable on Linux servers with 16 cores and 32GB RAMConcurrent tasks are 32 or 16VMs as reported in the following documentation:Limitation of Concurrent Tasks - User Guide for VMware vSphere (veeam.com) NOTE Task limits set for backup infrastructure components influence the job performance. For example, you add a VM with 4 disks to a job and assign a backup proxy that can process maximum 2 tasks concurrently for the job. In this case, Veeam Backup & Replication will create 4 tasks (1 task per each VM disk) and start processing 2 tasks in parallel. The other 2 tasks will be pending.  ThanksFederico 

What are the best practices for agent base Linux systems data backups of larger than 2TB volume without any failure? As well as backup of NFS volume?

We had a firm that upgraded our veeam to v 11.In the same time, we replace the SAN.The original SAN that was used for backup was replaced by the new unit.The original SAN was then used for the copy, and the copy SAN not use anymore.It appear that we lost all 95% of restore point that we had before cause of a disk space problem that corrupt the file for most jobs in the server. Now we only have one month of restore point cause. we lost everything else. We think that it was cause of a bad way to upgrade, but the consulting firm continue to claim that it was the disk space problem that caused the loss of six-month  backup.is it possible that the disk space corrupt all the restore point and there is no way to recover the old backup or maybe from our old copy SAN that is still unused since the migration?Thanks for your help. 

Hey all, getting ready to setup VDRO in the lab and production, but I have questions on the location of the vCenter server.  Currently, my vCenter is located in the primary site, but wondering if it should be instead setup at the recovery site, or if I should have HA or ELM configured so that there is a second vCenter setup at the recovery site.  ELM doesn’t sound as useful for this situation, but HA may work and there is low enough latency between the primary and recovery sites to support HA.  That said, I was hoping to the put the witness at our third site, but latency is higher to that location so that may not work.  Anyhow, I know I need to get my VBR backup server moved to the recovery site (was already on my list) but what’s considered the best practice here?

Hallo zusammen,ich sichere seit einiger Zeit einen Linux-Rechner mit Hilfe des Veeam Agent für Linux auf ein shared Folder, der auf einer Qnap liegt.Jetzt ist auf diesen Linux-Rechner eine Anwendung gekommen, die auf einer mySQL Datenbank basiert.Die Sicherung läuft weiterhin problemlos, das recovern auch.Allerdings bekomme ich beim booten des recoverten Rechners Fehlermeldungen bezüglich der Konsistenz der Datenbank. Die Datenbank ist zwar in 95% der Fälle in der Lage die Datenbankfiles zu reparieren, aber eben nicht in 100% der Fälle.Gibt es mit dem Linux-Agent die Möglichkeit eine mySQL Datenbank konsistent zu sichern?

Team, I have 2 ROSA clusters and want to create a multi cluster environment with them. I selected 1 cluster as master and executed the following command to get the context and got the below output.[cloudshell-user@ip-10-0-146-129 ~]$ kubectl config get-contextsCURRENT   NAME                                                                         CLUSTER                                             AUTHINFO                                                          NAMESPACE          default/api-rosa4keshava-vidk-p1-openshiftapps-com:6443/cluster-admin        api-rosa4keshava-vidk-p1-openshiftapps-com:6443     cluster-admin/api-rosa4keshava-vidk-p1-openshiftapps-com:6443     default          default/api-rosa4prasanna1-1m23-p1-openshiftapps-com:6443/cluster-admin      api-rosa4prasanna1-1m23-p1-openshiftapps-com:6443   cluster-admin/api-rosa4prasanna1-1m23-p1-openshiftapps-com:6443   default          demo-project/api-rosa4keshava-vidk-p1-openshiftapps-com:6443/cluster-admin   api-rosa4kesha

Incase of Multiple VMs available on top of Veeam how AAIP will help and Support

Hello all,I recently created a K3S cluster with Kasten K10. Upon exposing the Kasten k10 gateway for access to the dashboard i get a 403 access denied from the gateway service.Gateway pod logs: https://gist.github.com/TobiasS1402/74495efa2dfd4537af29a8fedf2b83fcKubernetes version: k3s v1.23.6-rc1+k3s1Cluster configuration: 4 node cluster w/ single master nodeInstalled features:Metallb v0.12.1 ceph-rook v1.9.1 snapshot controllers v4.0.1 traefik v2.7.0 calico CNI v3.22Command used to install kasten k10:helm upgrade k10 kasten/k10 --namespace=kasten-io --reuse-values --set auth.tokenAuth.enabled=true --set externalGateway.create=trueKubernetes pods:kubectl get pods -n kasten-ioNAME READY STATUS RESTARTS AGEfrontend-svc-6bdf747d77-2fjjv 1/1 Running 0 73maggregatedapis-svc-6cb47678c4-wzqft 1/1 Running 0 73mmetering-svc-7864cdcf48-qq75w 1/1 Running 0 73mgateway-8467b6cbf6-hlgbf

Dear concern, we have one server where we had a previous version (9.5 U4b) of Veeam running for some tests on. However we’ve never really used it until now. That time veeam was removed from the system however it seems not completely. While trying to install version 11 on this particular server, we are now getting an error message, telling that usage of DB for VeeamBackup is not possible as it has been created with an older version of veeam. Indeed there are still two DB services running. What is the best way to get this clean as we will use this server to run as our B/R server in the future but of course on main latest. The goal is to have a clean installation of veeam 11 now in order to reduce future problems in case of any migration is necessary for a new version. thanks and best regards Stephan

Today I have a server on Debian 8, and veeam does not back it up, where can I see which versions of Debian Veeam supports?