Discussion Boards

I am writing to request a new feature for Veeam Backup & Replication that would significantly enhance its robustness and reliability in disaster recovery scenarios.Currently, we are using Veeam Backup & Replication for our backup and disaster recovery needs across multiple sites. While we are very satisfied with the overall performance and capabilities of Veeam, there is one crucial feature that we believe would greatly benefit your product.Feature Request: Backup Server FailoverWe would like to request the implementation of a backup server failover capability similar to what is available in CommVault. This feature would allow seamless failover of the backup server itself to a secondary site in the event of a primary site failure. Specifically, the feature should include:Automated Failover of Backup Server: Automatic detection and failover of the backup server to a pre-configured standby server in the DR site. Replication of Configuration and Metadata: Continuous replication of

Is anybody using Cortex XDR along with Veeam? It should be fairly easy to extend the Antivirus definition file, but I can’t find any information about how (or even if) Cortex can be called to scan a specific file.

Hi all…. greetings...I am thinking about immutable repo will affect repo sizing or not…In general cases, immutable for 14d or 30d, which is just a part of the retention policy (say 30D 4W 3M 3Y), storage size is just the same no matter when the immutable is on or offAlso, in real sizing task, we usually reserve spaces for annual growthSome occupation on storage spaces will be absorbed by the buffer... What about in extreme scenario, large backup sources and no. of VMs, large delta change, and long immutable period say 3years. Will the sizing different between immutable on and off?

been doing backups of our vcenter vms to disk for some time now.  just tried out the application aware processing and several VMs reported erros like “cannot find linux guest credentials” or “unbale to perform guest file system indexing”.am I right to think this means the VM was not backup up to disk, and I need to turn off applicaiton aware processing until I have correct credentials on those VMs?

Welcome to my final recap of virtual VeeamON! On day two, I continued to attend cloud and security sessions. After the first day, it was clear that data resilience is top of mind whether we were discussing protecting and restoring cloud-hosted technologies or the security precautions to reduce ransomware attacks. Without ensuring data is protected on all platforms, it is much harder for an organization to be resilient and recover from a cyberattack; and Veeam has been enhancing its products to do just that.The morning started with another interesting keynote, “Hands-On With the Latest Veeam Innovation and Updates From Our Partners” hosted by Veeam’s Chief Product Officer, Anton Gostev. Since my first day with Veeam, it’s been evident that our partners drive our business and innovation, so it was exciting to watch a whole session featuring them. In particular, this keynote highlighted three Veeam partners: Lenovo, AWS, and 11:11 Systems.Lenovo’s Executive Vice President Kirk Skaugen dis

Hi.  I can't create a USB from the iso-file?I’ve had rufus on my PC for many years, but it does not work with this file.  I also tried Seagate’s SEATOOL5 with the same negative result.

Hi, I have a Windows 2022 Server with Hyper-V installed and running several Windows VM’s.  I think under B&R, there are two types of backups I can do for these Windows VM’s.  I can install Agent on them and treat them as standalone machines or back them up under Hyper-V.   Would anyone know the pros and cons of each method?  And is there a recommended method?thank you! 

Hello, I would like to have your feedback about how to manage S3 backup.I mean, on the service provider S3 Créate access key with correct privilegeThen I need to create a bucket. What name do you choose ? Is there use case where several buckets are needed for end customer ?And for the folder, same question.I mean, it’s more about governance and to be sure to understand correctly the pro and con.Do I need 1 bucket / job ? Do I need 1 bucket for all backup job and an other for backup copy ?Do I need 1 bucket for all jobs type ?Then, for the folder, 1 job per folder ? 1 job per job type ? 1 folder for all ?  I’m totally new to the object storage and would like to understand what are the best practice for this :) Thanks for your answer :)  

Hello, I would like some advice about tape management and what do you use as “tape name on label” ? I’m using only GFS media pool and export them offline as soon as they are used with different retention (14days for daily, 4 week for weekly, 12month for monthly and 2 years for yearly). Thanks for your answer.

Hi Folks, I just saw on LinkedIn @michaelcade reply in a post about another platform that I had not heard of? Anyone using this or have any input? https://www.verge.io/

As you may or not be aware, we try to run a 45min overview/demo on certain topics. The target audience is not only presales/solution architects, but also sales overlays that have an interest in technology and want to keep abreast of latest developments. With this in mind, is there any particular topics that you feel should be covered at a 100/200 level of detail relating to Veeam ?Thanks

Hi,I currently have 2 Veeam servers, one is on-prem and one is an Azure VM. I’m trying to link Veeam to my Azure subscription so it can see storage which contains my backups. I have created an enterprise application in azure for this. In VB&R I then need to created an Azure compute account to link Veeam to Azure. For my on-prem server this is possible and I am successfully able to connect Veeam to Azure by adding the credentials. I did originally have issues, where by I was using a systems proxy - which would fail the connection, however if I added the proxy server in Edge, this would then work.Next I logged onto my Azure VM with VRO installed and went to follow the same process. I have added the proxy in both “netsh winhttp” system proxy as well as Edge. I cannot get the application to work. When I run wireshark, it looks like the Azure VM is bypassing any sort of proxy setting and trying to get directly to Azure.My question is, has anyone had the same issue, is it even possible t

What different between this community with the forum (https://forums.veeam.com/)

Hello,We are planning to upgrade veeam from V11.0.x to 12.1.x, but on current installation (V11) we have configured Linux repository with immutable settings. But in V12 we see that there is Linux - (no immutable settings) and Linux as Hardened Repository i(or something like that with immutable settings) . Question, do we lose immutable settings after migration and there will be need to create new repo with immutable settings ?? Thanks,    

I’m back with a recap of the sessions I attended and my takeaways from Day 1 of virtual VeeamON! After the opening keynote, I made an iced coffee because we all know tech runs on caffeine, and began my journey through the worlds of cloud and ransomware. The first thing I tuned in to was “Embrace the Breach with a Step-By-Step Cyber Recovery Plan” with Brad Linch and Michael Archick of Veeam’s Enterprise SE team. They told us that 75% of organizations get hit by cyberattacks. Additionally, according to the 2024 Ransomware Trends Report, 96% of attackers target backup software specifically. The important thing to understand about cyberattacks is that once an attacker is in your environment, they can find the tools they want to compromise quickly. Once they’re done with this information, they may even sell it to another group. This is why it’s important to have good data backups. Veeam’s Zero Trust Data Resiliency Architecture is built into its products for this reason. Brad and Michael t

Actually, the IBM tape library is physically connected to Veeam backup server in our environment, but when i configure tape library through Veeam server console, what i enter the server details means IP or hostname.because Veeam backup server and tape library IP is different, so what should be enter for tape library configuration.i did the backup server IP then drive is not reflected in Veeam console, but i checked computer management the tape drive is available on device manager. what is the issue, please suggest.

A customer wants to set up a Veeam cdp job for a critical vm on a vSAN cluster v8. The source and destination cluster is the same. Is this possible? does it make sense?

Hello,I have added to veeam IBM FlashSystem as Spectrum Virtualize, and there is used superuser accout(most powerfull account on FlashSystem) for access. Question, does sombody know if possible to create least privilade account on FlashSystem ??? If yes, which role this account should have Thanks

In addition to Veeam's current capabilities for ransomware recovery and prevention, Coveware by Veeam will offer proactive enterprise readiness and industry-leading cyber-extortion incident response services. Through the Veeam Data Platform, Coveware will provide proactive services, forensics, and remediation capabilities to Veeam Cyber Secure clients. https://www.veeam.com/news/veeam-launches-most-complete-support-for-ransomware.html 

hello,I have two instance of Veeam with Hardened repository. On each there is one Job and this contain all VMs from specyfic vCenter.But on one instance of veeam i have one VIB file per day contining all VMs and on second instance I have one VIB per VM per day. Is it configurable somehow on second instacne to also have one VIB file per day for all VMs??  Thanks,

Hello Veeam Community! This is a community thread so we can talk about our VeeamON 2024 experiences. Join the chat and share your thoughts about the events and announcements.Are you participating virtually or in-person? What is your most-anticipated session? What is your favorite announcement from VeeamON 2024? What stole the show for you?

Customer's tape needs to be erased, prompt  Error  Unable to perform Tape erase for library IBM 3573-TL E.70: cannot lock tape drive。I don't know how to operate it

New announcement hot off the recent Veeam Data Cloud release. Veeam delivers a fully managed, secure cloud storage resource on Microsoft Azure that eliminates the headaches of managing infrastructure and unpredictable cloud cost models.Utilising Microsoft Azure Blob Hot LRS storage, with immutable and encryption, all for a consistent fee per TB. More details here: VDC Vault

Hi guys,I have a problem when searching for information in jobs type "EpAgentBackup", in the "Backup" type I can search for all the information, but in "EpAgentBackup" I can't... I would like information like the following:                Job                          = $JobName                Name                      = $jobObject.Name                Size                         = $jobObject.ApproxSizeString                PointsOnDisk            = $PointsOnDisk                LastResult                = $LastResult                LastBackupStart        = $LastBackupStart                LastBackupTotalSize  = $BackupTotalSize                LastBackupSize         = $BackupSize                RepositoryPath         = $RepositoryPath                Status                     = $jobStatus Today I can't search for information via PowerShell in Agent type jobs.Could someone please tell me if it is possible?Thank you for all your support!Thanks in advance