Solved

What can the security scanner Trivy target in Kubernetes?

Morning,I’m currently trying to figure out exactly how to acheive my backup strategy in Veeam and am scratching my head a little bit… Essentially I want to do the following:Run incremental backups weekly to disk Once verified write these backups to tape and delete the files on disk - These should be written to the weekly set in a GFS media pool Once a month perform a full backup Once verified, write these backups to tape and delete the files on disk - These should be written to the monthly set in a GFS media pool. As above for yearly backups.How does one achieve this? I’m a bit confused by the job configuration process as to how the tape jobs “know” which backup run to write to each type of tape?Any help would be gratefully received.

Hi guys, Hope you are well.I have a little question. Currently I backup my Azure Vms with Veeam for Azure. I have a Backup Copy Job to copy this backup on my VBR server Onpremise.Now I want to implement an offline backup from this backup copy with a tape job.Ideally I would like to have an externalization everyday of a full backup.Unfortunately the “virtual full” can be scheduled only once a week. is there a way to do it more offen with powershell script?What are the possibilities for my need. :D I thought to use File to Tape and backup all the chain but it will consume to much media...

Dears,I would like to ask if it is possible to let a sister company to replicate their vmware VMs servers to my replication site.Keep in mind i am replicating my VMs to a ESXI attached to a storage that has alot free space.Is it ok to let our sister company's veeam to connect the my esxi and they create replication jobs to replicate to my esxi aswell, so this esxi will be serving two companies as DR site at the same time and two different veeam servers communicating with it. 

We restored close to 40TB of SQL Data. It took almost 100 hours to do the restore. The backup base image is on NetApp All Flash array. All the datastores for the VMs are in this array. So I would tend to think that application restore would be a lot faster unless application restores are done through the IP network (as opposed to Direct SAN). I monitored the network interface of the destination VM and saw the traffic coming into this interface.What is really the data flow for a SQL application restore?  

What is the name of one of the most monitoring solutions in Kubernetes?

Hello, I cannot upgrade from 5.0.2.22 to 5.0.3.33 from the VO365 console, I receive an error message: “certificate verification failed certificate is not valid”, do you have any ideas? Thanks in advance, Omar De Souza.

how to clear vmce exam as soon as possible

Hello noticing failing backup on our AKS cluster: ```cause:  cause:    cause:      cause:        message: 'Failed to get VolumeSnapshotClass (true) specified in Storageclass          (default) annotations: volumesnapshotclasses.snapshot.storage.k8s.io          "true" not found'      file: kasten.io/k10/kio/exec/phases/backup/snapshot_precheck.go:105      function: kasten.io/k10/kio/exec/phases/backup.runCSIPrechecks      linenumber: 105      message: Failed to get K10 VolumeSnapshotClass    fields:      - name: PVC        value: nginx-pvc    file: kasten.io/k10/kio/exec/phases/backup/snapshot_precheck.go:87    function: kasten.io/k10/kio/exec/phases/backup.isCSIPVC    linenumber: 87    message: Failed to run CSI prechecks for PVC  file: kasten.io/k10/kio/exec/phases/backup/snapshot_data_phase.go:268  function: kasten.io/k10/kio/exec/phases/backup.processArtifacts.func1  linenumber: 268  message: Failed snapshot precheck for namespacemessage: Job failed to be executedfields: []``` Kaste

At a custmer side they deployed enterpise manager and connect backup server in it. but in a case format the machine and reinstall it but the problem is backup server popup please manage it like they want or update your lic key. but backup server told please manage the server with enterprise manager  case ----is enterprise manager is not availablei want to remove my machine with enterpise manager . 

Can you use ingress with Minikube?

What types of Authentication does Kasten support?

Hello, everyone! I have been studying and doing some labs to better understand how the immutability on a Linux Repository works. This is my current Veeam Backup & Replication structure:- 1 Backup Job for VMware VMs;- 1 windows agent Backup Job for a physical machine;- 1 Backup Copy job for each of the previous jobs, with the hardened repository as the target. The hardened repository is a Ubuntu 20.04 LTS with a XFS disk. The SSH service is disabled and no gateway is set. The Veeam server was first configured to use a single-use credential.Everything works great! My question is:In a scenario where all the VMs, physical servers and Veeam server are lost, where all I have are the immutable backups, how should I approach the repository?What I did so far was:- Start the SSH service of the hardened repository, open the port 22 in OS firewall;- Get a separate windows machine running and install Veeam B&R in it;When I tried to add the Linux repository to the new Veeam server, it could

Name a CNI that has Global Network Policies, i.e. not just namespaced.

Good morning; I have been having some problems with our current setup, I'm ok with smashing my hardware and starting over, but I want something I know will work! I am having issues with a backup copy job moving our backups off-site to another location.We have Veeam installed on a server in our primary data center, this server has 64TB, and all our primary backups are stored here. We have a backup copy job that pushes backups off-site over a VPN to Synology DS416play. At first, we set this up as an NFS share connected to a repository on the Veeam server; doing it, this was very slow, and backups failed. Then we changed this to an SMB share connected to a repository on the Veeam server; again, this was slow, and jobs would never finish.Then we created a LUN and attached the Veeam server with ISCSI creating a drive letter and pointing the repository to this. The ISCSI method increased the speed jobs were flying and working! But over time, we started getting "Stg.CheckMetadataCorrupt" erro

Hi ,Are there any known limitations to backing up a Linux VM with the Linux agent residing on an esxi host with a socket license?Thanks! 

What is the easiest method to force a pod to run on a certain node?

What do Liveness probes do and how do they differ from readiness and startup probes?

Hi all. I have read many threads and howto’s. I am here now because I just cannot find the answer.As mentioned I have 11a Enterprise plus and can create a Backup repository (although it cannot be selected as it is not listed when I try create a backup but I believe this is not the way to do it any way)When I go to External repositories and select Connect to, I can get all the way to completing the Bucket details on the Wizard screen, and just after selecting the folder (which is another magic trick in itself) I get the error “Repository description not found Agent failed to process method {Cloud.GetRepository.Owner} and can go no further. Does anyone have any idea’s or am I missing something obvious? I just want to back up my HyperV machines nightly to Google cloud storage instead of an external drive and the human management of that.

where veeam save in your license file .lic @which directory in server

What is the name of Rancher’s distribution that is best suited for the edge?

Running Veeam B&R 11.0.1.1261 (11a? and fairly current)I was advised by our veeam rep to use a backup copy job to accomplish what I was trying to do. Basically:we have a daily backup job to disk with 60 days of restore points, and weekly full backups on Saturdays. I want to move a copy of ONLY the weekly full from this job to a different datastore that’s part of a scale-out repository, most specifically to use the backup copy job’s ability to apply GFS retention to what it’s copying Unfortunately the scheduling options for the periodic backup copy job leave a lot to be desired.The only option you have is “run this job every X days at Y time” - that’s it.Considering that normal backup jobs get a wide variety of scheduling options (most importantly in this case “run on specific day of the week” or  “run after specific backup job”) it seems odd that none of these extremely useful options are available within backup copy jobs.Instead the only option is “run every 7 days” which means I

Hashicorp’s Vault can be leveraged to do what in a Kubernetes Cluster?

Write out a deployment manifest for nginx, use a nodeport type service to expose the deployment (should all be in the same yaml). Also use vsphere csi storageclass and mount the correct path to the index.html file

Estoy migrando unos servidores virtuales de una sede a la otra con peso de 4 teras cada uno y se demora mucho en trasmitir, puedo llevar el full del lugar de origen al lugar de destino  y luego ejecutar los incrementales. hay algun procedimiento para realizarlos