Solved

Hi team:I have a question about the next:I have a windows server that contains certain files that I want to backup to veeam.I have already done it with the veeam agent and I have no problems. However, I want to copy the same files to tape.I have read the information about File - to - tape option but how do I apply it without in my case I have a single tape drive which is already backing up VMs.Regards, 

I’ve read agent based backups ae limited to maximum of 999 restore points per job. Does NAS file share backup have a maximum number ?

Hi Everyone, I was hoping for some advice on an issue I’ve found after upgrading to V6 of Veeam Agent for Windows free edition on Win 10 22H2.I’m not sure why but until I upgraded from V5 to V6 my backups were running fine every evening and completing without any issues, since the upgrade to V6 the backup starts but either sits at 0% 14% or 18% and regardless of how long the PC is left running it never seems to get past this point. I’ve disabled throttling in the menus in the hope this was slowing the backups down but its had no effect on them.The total “full backup” size is around 1Tb split across a Sata M.2 boot drive and a regular old 1Tb spinning disk, I’m running Kaspersky AV for reference. The only change I’ve made is the upgrade from 5-6 is is possible to downgrade back to 5 to test if this is a veeam issue on the PC or will that force a new backup ?Any advice would be appreciated as I’m at a loss as to why the backups have just started taking so long.*Edit* I’d also like to men

I have a 5 TB file share on Windows. Should I back this up using agent backup or File Share backup? I  have a backup copy job to send backups offsite. Currently doing file share backup with retention time set to 4 years. I think the agent based backup would take up more repo disk space (multiple vbk files)?

I am trying to do agent based backup of a Windows file share cluster. However when the job is set as "Failover cluster" job mode I can only select the entire volume to backup.I want to select particular folders on the shared drive to backup. Is this possible ? 

I did an agent based backup of a windows computer and the “servers” license count increased by 1 instance. I deleted the backup data but it the server still shows up in the license report.How do I release it ?

Please help with adding a Hyper-V host. Veeam 11. New Hyper-V Server > Credentials: Added Domain User to Administrators Group on Hyper-V Host. Veeam B&R and Hyper-V Host on same domain. Window Firewall Off:Windows Firewall On: RANT:Hours in, this is frustrating that Veeam doesn’t nip this in the bud and does not rely on MS technology (Ports, WMI...etc) to install, and shifts responsibility onto the customer and offers unhelpful dialog boxes and similar push back in forums. 

We have our main prometheus deployment and would like to use that instance also for the kasten needs.I’ve seen in the chart that kasten allows for the use of an external prometheus and grafana.Are there any specific configurations to do for kasten, are there anu compatibility matrixes to be aware of?Is the external prometheus supported (we have kasten support active), will kasten loose any feature by using the external prometheus?Thanks

Are there any plans for a Meetup this year? Virtual or In-Person Cheers Mark

Hello,With Veeam Backup & Replication Community Edition 11, On one of the backup jobs, when it starts, I encounter the following error:Failed to perform health check Error: Agent: Failed to process method {NasMaster.TransformMeta}: Unexpected meta file size 348160. Expected size: 356352. The source is an NFS share stored on a NetApp storage, and the destination is a Synology NAS. I have other jobs that use the same sources and the same destination, and they do not encounter this error.The job is responsible for backing up user files such as Office documents, PDFs, etc. When it runs, no files are open or currently being modified.I tried performing a job check as instructed on this page https://helpcenter.veeam.com/archive/backup/110/vsphere/health_check_nas_backup.html, but I encounter the same error. Thank's for advance.Philippe

Has anyone experienced this issue after performing the Veeam v12.1 upgrade? Unable to connect to guest OS for guest processing. Cannot find Linux guest credentials.  Our Veeam environment is configured to utilize vSphere backup tags (which includes both Windows and Linux VMs).After the upgrade to v12.1 our backup jobs that included Linux VMs didn’t backup.We have opened up a support call, and in the meantime have a work around.  If we would specify each Linux VM along with the backup tags within the backup job, the Linux VM does backup.

I have 6 months of daily restore points, a monthly VBK and daily VIBs for each month. I have the backup job configured to keep 180 days of backups. However, when I do an FLR, it only displays from 11/1/23 forward, just 60 restore points. I feel like the repository needs to be rescanned but I can't see how to do that. (I use Veeam B&R for our corporate backup system, so I am familiar with this, but I don't see how to do it in the free version). I also tried right-clicking the actual VBK or VIB I want to use and then "Open", but it just opens the FLR window, showing only the last 60 restore points.This behavior exists on multiple PCs where I use Veeam Agent for Windows.  This product isn’t much use if I can’t restore my data.I opened a case (#07068715) over a week ago and it was auto-closed because no one was available to look at it.Does anyone know how I can access my restore points? Thanks.

Good day,I have been enthusiastically using "Veeam Agent for Microsoft Windows" for some time.Now I have the problem that when I have activated my new Premium VPN from https://hide.me "Veeam Agent for Microsoft Windows FREE" unfortunately aborts with an error message when creating a backup!What exactly do I have to set or allow in the VPN app so that the backup still work with VPN enabled?My system data & backup-media:-Windows 11 Pro 23H2-Veeam Agent for Microsoft Windows 6.1.0.349 - Free Edition-Backup-medium: External 2.5-inch hard disk Many thanks for any helpful answers! 

In primul rand salut si La multi ani! Avem un mediu de Veeam Backup for Microsoft 365 exclusiv pentru backup de Exchange. Repository-urile au retentie de 32 de zile. Dupa cum stiti, cand ruleaza retentia nu se elibereaza de pe disc spatiul alocat deja pentru repository. Astfel, dupa ce trec 32 de zile din 2024, folderul “2023” de pe discul repository ar trebui sa nu mai contina date deloc, dar va continua sa ocupe pe disc spatiul alocat la momentul actual. Intrebarea mea este cum pot elibera de pe disc spatiul acela, alocat deja pentru 2023? Stiu ca pot face shrink la repository.adb dar am nevoie temporar de spatiu liber pe disc inca odata cat repository-ul, plus ca trebuie sa fac asta cu serviciile de Veeam oprite (adica backup-ul nu va rula in acel timp). Din experientele anterioare, dureaza undeva la 60 de ore. Pot sterge folderul “2023” din repository dupa 32 de zile? Sunt alte variante?  Multumesc, Dragos

Hey there. I use Community edition for my home lab and photo archive backup proposals. VBR is installed on my PC, it was added to Veeam as a File Server, some folders were added to the job, and everything was fine until I added these folders to sync with my Nextcloud (real files are always on device).Now I faced this error:08.01.2024 22:43:43 :: Unable to backup \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy12\Pict\Filmscan. Incorrect function.Failed to read data from the file [\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy12\Pict\Filmscan].There are job logs from C:\ProgramData\Veeam\Backup.Does anybody knows, how to resolve it? 

Hello Veeam Gods,Newbie here, looking for some advice on system design… I’m hoping I’m in the right place, but let me know if I’m not.Here’s the stack:DC1:3x ESXi Physical Hosts1x VCenter Physical Server1x Win22 100TB StorageNon-Prod Nimble System with 40TB storageAll on 25GB backbone LINK: 100gb fiber connection DC1 --> DC2. Separate buildings, power, generators, WAN etc. DC2:3x ESXi Physical Hosts (same spec as DC1)1x Veeam Physical Server with VBR + Explorers removed1x 600TB Ubuntu hardened Immutable StorageAll on 25GB backbone WAN:2 x 2GB redundant WAN connections (1 into each site but HA across the two, redundant firewalls too)Wasabi Buckets for Offsite S3 storage. The Plan (that I’d like guidance on):Run Production in DC1Use CDP to DC2 for near-real-time failoverBackup Production in DC1 to the 100TB Storage in DC1 (store short term backups - sub hourly)Copy Job to DC2 600TB Ubuntu Immutable (store short and longer term backups - sub hourly, hourly, daily, weekly, monthly)Copy

Dear,We have setup Kasten with OIDC integration with our Keycloak instance.We can login in Kasten with our keycloak credentials, however, given that the Access Token has a lifetime of 5 minutes we are loged out from kasten after 5 minutes, like if the Refresh Token is not used. We have configured Kasten like this:data:  provider-url: {{ $providerUrl | b64enc }}  redirect-url: {{ $clusterUrlTrimmed | b64enc }}  logout-url:   {{ $logoutUrl   | b64enc }}  client-id:    {{ .Values.identityProvider.clientID | b64enc }}  client-secret: {{ .Values.identityProvider.clientSecret | b64enc }}  scopes: {{ .Values.identityProvider.scopes | b64enc }}  usernameClaim: {{ .Values.identityProvider.usernameClaim | b64enc }}  usernamePrefix: {{ .Values.identityProvider.usernamePrefix | b64enc }}  groupClaim: {{ .Values.identityProvider.groupClaim | b64enc }} I don’t know if this is the expected behaviour. 

I was thinking of using a bare metal restore into a VM and have actually made it work, but what I wasnt able to do successfully was resize/shrink the disks in the process. The physical server has lots of wasted space which I would like to avoid in the VM. Is it possible to accomplish a “disk shrink” using a bare metal restore?

Hola, tengo un job que hace bakup de solo de bases de datos de un servidor, lo configure para que lo haga con una retencion de 3 dias, osea solo necesito 3 dias de bakpPero de alguna forma hace mas copias de las que tiene confoigurada, en este caso llego a 6 copias. porque hace esto?  Como se puede arreglar o es normal que lo haga? Me pasa en los 3 jobs. que tengo. hace mas copias de las que les configuro. Muchas Gracias!!

Does K10 cluster-scoped resource backup include IngressClasses? Tried searching for an answer to this question but no dice.The reason is because our company re-installed an on-premises Rancher RKE2 cluster from scratch as part of a DR drill using Kasten K10 for data and application recovery. The recovery process was mostly smooth with a few minor gotchas but in particular, it seems that the cluster-scoped resource capture skipped the existing GitLab NGINX IngressClass despite having no resource filters applied - after restoring both cluster-scoped resources and our GitLab Chart, the IngressClass installed as part of the chart was missing causing the GitLab ingress controller to return NGINX 404 errors, which was solved with a manual Helm upgrade reusing the existing chart version and values.While this is a minor issue with a relatively simple workaround, we’d like to know whether K10 includes IngressClasses in its cluster-scoped resource backup by default, and if not, is there a way to

In my environment, all of my switches and all of my virtualization hosts support jumbo frames. as well as the Data Domain that is my storage infrastructure.  However, my VBR environment - 3VMs (the VBR server, 1 proxy, and 1 managed server used to mount restores) and the physical server that attaches to the tape library are not currently set to use jumbo frames. I am wondering if setting them to use jumbo frames would help, improve performance, reduce bottlenecks?I can’t imagine that it would hurt, right?Anyone using jumbo frames? What is your experience?

Hi all,I report that in the section: Microsoft Teams Veeam BOT Integration cannot proceed to the lab because starting Teams requires the demo account password.  

Hello,I want to recover one computer account password from Veeam B&R credentials, I followed the KB4349 article, but I was unable to locate the DATA key under HKLM\SOFTWARE\Veeam\Veeam Backup and Replication to view the EncyptionSalt value. I didn’t found any article or guide for such case, can anyone guide me how to find the EncryptionSalt value if it is not available in registry?

Hello,if I understand it correctly, in Veeam 12 the backup health check is performed independently from the backup copy job.In my case that leads to a problem because the backup repository which is the target for the backup copy job is only switched on for the backup (powering on and powering off is done by job scripts in the backup copy job).Is there any solution for this?In my opinion there are several ways that would lead to a solution:Starting health check immediately after the backup before the after job script. But that could not be configured any more or I didn’t find it. Adding the functionality to execute scripts before and after the health check. Starting health check manually from the command line. Then I could execute a script which starts the repository, performs the health check and power off again. I found powershell commands to perform a backup health check, but that doesn’t work anymore. Or I used it wrong. Starting and stopping the backup repository by a windows job a

Hello - total newbie here,I installed CE 12.1.0.2131 on Windows 10 Pro (desktop computer type) I wanted to try creating a simple backup job to see how it works. I intend to chose just a single folder of files to be backed up. I am in Home > Backup Job > New Agent Backup Job > Tab = “Objects”I checked the box for “The following file system objects:” It displays a windows form with a single line text box, I do not see any buttons to open a file picker dialog box to be able to select just the single folder I want to backup.I see a similar constraint when I click “Next” to go to the tab labeled “Local Storage”. There is just a text box on a form and no file picker dialogs. I need to type the full path to the storage location where I want the backup to be written to. Is this intended behavior to not be able to use a file picker dialog box? Is this a limitation of the Community Edition? Thank you.