Solved

Hello All.About 5-10 years we were hacked and had ransomware. Installed the latest edition of Veeam and with the malware detection enabled. It now found 20 instances. Some are pointing to certain directories and I can recognize the names of the files and they have the .wallet extension (this appears to be from the old hack I had) when I go to the location of the folder and enable show all files and folders I still do not see these files listed.  I therefore deleted the entire folder (it was junk anyways) and today a day later it detected the same malware in the folder that was deleted yesterday.   I’m trying to figure out how this is detecting items in folders i erased.  Anything tips?

Hallo zusammen,ich würde gerne einen Exchange 2016 Server von einem ESXi Server auf einen Hyper-V Server mit Veeam B&R umziehen, d.h. die VM auf dem ESXi herunterfahren, ein Backup fahren, danach per Instant Recovery auf dem Hyper-V wiederherstellen und anschließend die VMware Tools deinstallieren. Hat hier jemand Erfahrung damit, ob das problemlos klappt? MfG

Hey ! Do you know if it’s possible to change the Settings Related to Veeam for M365 Log Files ?I found a KB for VBR but nothing for M365. https://www.veeam.com/kb1825Thanks.

HiI try to create new policy and enable snapshot export. i face some error “Profile does not support collections” and i noticed the when i select the export location profile i saw “VBR profiles not permitted here”i checked the  location profile for VBR and is valid. anyone have any ideas? 

I only found ETCD backup and restore for environment setup by Kubeadm in the documentation.Does backup/restore of ETCD in Azure Arc-enabled Kubernetes supported by Kasten?Thanks.

Hi Everyone, I use vCenter to manage esxi hosts. I am planning to update vCenter. When updating vCenter, I have to configure remove vCenter HA and delete passive,witness VM then update vCenter. i have configured job backup for vm vCenter on Veeam Backup. I have a question, if the vcenter update process fails, I restore the vm vcenter, will it return to its original state including the configured vcenter HA and the passive and witness VM?Thanks a lot.

Dear Community,our installation is based on a single Hyper-V host with 3 VMs. Veeam v11 community was running fine until I upgraded to v12.Software is installed on a Win10 dedicated PC. When launching the V12 console, it asks for an Host upgrade which arrives to an error:“failed to upgrade host components. error: veeam distribution service is not installed”Do you know how to install such service on host?thank you for your testimonials and help

Hello,is there a way to failback after a manual failover?On my situation, I have one host (esxi) with some vms including the Veeam vm (all components: proxy, server, consolle etc) and another one host where I store some replicas vms. In case the first host become offline (including the Veeam vm), I could power on manually replicas on the other host, but how to failback to the original host when it become online again? Obviously Veeam server at this point doesn’t know that I have done failover.. is there a way to consolidate each replica on original vm ?I know it is not the best situation but at the moment there is no other options.thanks!

I'm getting the following error in my Veeam replication job. This problem is sometimes solved. But I started to get a few more replication jobs. Has anyone seen this error before and know the solution? 

Hi, I have a protection group setup with multiple Windows PC’s (all running Agents managed by B&R) and I would like to perform a full backup on one of the machines (vs. all machines).  Is that possible?  I know I can select the machine and do a Quick Backup, but I think that does an incremental backup and not a full backup.  I would like to do this because I found that the existing backup is corrupt (I get a decompression error when I try to restore it). Separately, is it possible to delete the corrupted backup from the Backup Repository?  And is it possible to scan all the backups to make sure no other ones are corrupt? Thank you and happy 4th for those in the US!   

In this KB https://www.veeam.com/kb4027 The Huawei Plug-In for Veeam Backup & Replication reached End-of-Life on 2022-04-22 and is no longer available. VBR cannot call Huawei storage with it’s API to complete the backup job with storage’s snapshots. https://helpcenter.veeam.com/docs/backup/vsphere/system_requirements.html?ver=110In user guide of VBR v11, Veeam Backup & Replication does not offer integration with Huawei storage. According to the above, Veeam VBR cannot support any backup integration with Huawei storage. If the environment only includes VMware ESXi 7 and Huawei storage, what is recommended backup mode can be selected in VBR v11?

As we all (must) know, when you have e.g. yearly and monthly restore points for multiple machines in one chain on a ‘classic’ backup repo, you can delete the monthly backups from this repo by deleting the according files (VBK, VIB, VBM). This allows to manually keep the repo and only allocate storage for yearly backups.How do you achieve this on object storage ? I can delete machines from a backup, but then all restorepoints are affected. The same granularity to delete some points in the chain would be nice.This helps to save storage on public cloud storage accounts that were previous used to store monthly and yearly backups, but now to keep more backup points, the customer only want’s to keep the yearly backups because he already builded a monthly chain on another repo.

Hi All, How we can change Kasten dashboard access from Http to Https in an redhat hopenshift environment. BR, Ali

Hello everyone, I am wondering if it could be added to Hands on Labs, lab for Veeam backup for Nutanix

Hello Forum Members,I'm currently using Veeam Backup and am keen on configuring an automatic power-off for the system once the backup process is completed. Could anyone kindly provide guidance on how to set up this feature, or direct me to the relevant documentation?Your insights and assistance would be highly valuable.

Hi all, I have a question about RMAN Backup. I've been testing RMAN Backup at a customer recently. For security reasons, they have blocked access to DB and RMAN with the OS account and only allow access with the DB account 'sys'. I know Veeam recommends that use an OS account (typically ‘oracle’) that belongs to the 'dba' group and has ‘SYSDBA’ privileges but, this is company's security policy. This doesn't work, so the plug-in won't install, and I can't run the RMAN script.My case is not the first one in the world.Veeam support team just tells me to assign permissions to the OS account (which is irresponsible). Is there any workaround? Thanks in advanced !   

Not sure where to post this but as it’s HOL related I thought here might be useful.  I’ve been trying to use the above HOL (Embrace DevOps) and it sadly fails to connect to swagger on the Enterprise Manager.  The NFR license used has expired which I presume to be the cause.  

Cleaning tape CLNU00 is in unrecognized media and checking on the properties Wear is N/A. Is there anyway we can change to number of usage? 

So, my backups were not running and it was giving me DB is not synchronized error, I tried to resolve it but I couldn’t resolve it. So, then I made a new Backup Policy and added a new storage, but now a VM 2.8 TB (2TB used) has took more than 65 hours and it's still not completed. So, can anyone look into this matter urgently?

I encountered the above error when using a new Windows server. I'm certain that communication between servers is normal, and the ports are open. I've successfully added several servers of the same type without any error. And I've tried the following:Disabling the firewall and antivirus software. Adding a new account with administrator privileges. Using the IP address instead of the DNS name. Checking the registry or services to ensure they don't affect the relevant services. However, this issue still persists.My server is not within a domain, and this server is not a virtual machine

I am trying to create a Backup Copy job in VBR for my Veeam Backup for AWS jobs in S3 but the icon is greyed out. I have an enterprise plus license so should I not be able to do this?   

I removed the veeam B&R server and Enterprise manager from the domain due to security issues, and now I want to know if it is possible to log in to these servers, which are workgroups, with domain users ?Is there a best practice? 

Are there anything besides the tape that need to be preserved before removing the old tape library? What are the steps to add the new tape library?https://helpcenter.veeam.com/docs/backup/vsphere/connecting_tape_devices.html?ver=120Following this the drive will automatically appear and how about the media? If the tapes are added to the tape library they will automatically appear in the media.Last step will be to create a Tape job

Buenas tardes estimados, Mejores practicas Veeam y su integración aun Dominio Active Directory Una consulta, estamos evaluado la implementación de Veeam y se mencionó que no se recomienda su integración al dominio. ¿Esto es cierto?  Me gustaría tener claro este punto, ya que de mi parte he visto varios artículos que mencionar su operatividad.2.- ¿Es recomendable integrar Veeam al Dominio Active Directory? Y si es recomendable, donde puedo obtener esa confirmación oficial? Agradecido de antemano por la ayuda que me puedan brindar, Saludos cordiales,

We have two DCs running VMware clusters that have independent vcenters managing each of the clusters. A instance of Veeam B&R instance is proposed to be deployed in each DC to backup the local clusters. IN addition, there will be replication of some of the VMs across the DCs using Veeam B&R instance. Multiple packs of Veeam VUL licenses have been procured for all the VMs in both clusters. Need to understand on how we should be splitting the licenses across the two instances and the impact of VMs being replicated on the license consumption.