Discussion Boards

Hi Folks, I am being jettisoned back into the tape world, “tape is dead, long live tape”. I was wondering if anyone had tried in their lab mhVTL? https://www.mhvtl.com/ I normally use Quadstor but wanted to know if you anyone had experience with the one above. Thanks  

I’m going to preface this by saying, please please please, never try this in a production environment!!! But yes, it is technically possible to run Veeam Backup & Replication, Veeam Agent for Windows, Veeam Agent for Linux, and Veeam Backup for Microsoft 365 on a PlayStation 4 (PS4). ‘How?’ and ‘why?’ are the logical questions to ask at this point, so let’s take a quick look. The PS4 has been ‘jailbroken’ for some time, to the point that you can run Linux distributions on it, just like you used to be able to officially within the Playstation 3 era, for a while anyway before Sony removed the feature. A developer called Noob404 has released a PS4 port of Proxmox, the well known hypervisor platform, and has managed to successfully get Windows 10 to run on their PS4.As Windows 10 is a supported OS for many Veeam products, this does unintentionally enable their ability to run on a PS4!

Not able to deploy ,install agent remotely to laptops and individual computers on my environment from veeam backup and replication server .If i am installing windows agent directly on the system it will work

hello everyone,i’m a beginner for using veeam software, so I would like to know about the calculation of backup proxy needs. according to this article https://bp.veeam.com/vbr/2_Design_Structures/D_Veeam_Components/D_backup_proxies/vmware_proxies.html if I have 236 VMs with used data around 192 TB and for physical server is 17 with used data 50 TB,VMs proxy calculationD = 192 TB*1024*1024 = 201326592W = 8H*3600 seconds = 28,800 seconds (backup Windows in seconds)T = 52428800/28800 =6991MB/sCore Full = 1821/100 = 70, Core Incremental = (T*CR)/25 = 14 core, proxy requirement : 70core & 140 GB RAMwell, if I want to achieve backup windows in 8 hour the proxy that I need is9 virtual proxy8vCpu and 18 RAM for each virtual p

Hi Everyone, I know this came up again recently but could not find the post. I am starting to wander more back to the forums due to work and saw this thread again which has moved on. Looks like someone has a solution to get tape content: https://forums.veeam.com/powershell-f26/get-tape-content-via-powershell-t22142-60.html 

Team,Can’t find how to specify the type of DB to be installed during the v12 unattended setup. I want Postgres =)Anyone can help?Alexey.

I wish to build a new HOMELAB. Here is a guide and many others I found on Reddit.- How is your lab setup? What would you recommend? Main virtualisation solution would be VMware (would need multiple hosts here). I would also have HyperV and Proxmox VE within this environment. Yes, this is possible!https://www.altaro.com/vmware/perfect-homelab-vmware/?vgo_ee=%2BWombPttbhpwDFBk3C2zvW7%2BX%2FpMfSStElYb34Re%2FNg%3D (I love the first approach in this guide).I have got my ideas, but would like to learn from you. Keep in mind, I need a cost effective solution ranging from hardware to Power etc. Here is a talking point but just talking about the installation. I do NOT need help with the setup (deployment) tips as this is a walkthrough for me.

our old server which is hosted on storage as vms need to be migrated using Veeam restore tool on VBR .But I have a concern on restore as i am trying to restore to new machine which ìs seperate physical machine for host and storage.so while restoring the data to new location on new device is there any option to seperate host and storage datas while restoring 

Very small environment - ten users and two quite old servers Fujitsu Primergy TX1310 M1 with Windows Server 2012 R2 Foundation. They have the same hardware, the only difference is in disks models and capacity. The first one is a domain controller (+DNS, DHCP, home folders, other shares). The second one is joined to domain with installed Veeam B&R 12 Community + MS SQL Server. Both servers are built on internal LSI Software RAID (four disks, 2x RAID 1). AD server has two partitions on LUN 0, the first one is OS volume. Recently we had serious power problems and AD server stopped to work properly - no licenses, no services, no RDP etc. I was able to log in locally but there was a problem with networking - the interfaces worked very slow and sometimes stopped. I was not able to start services nor change their settings - the service property window was frozen during saving. I wasn’t able to install any update because of the network problems. After next and next etc. restart it start

I am soliciting feedback from the community and Vanguards in Slack about an issue we are seeing so wanted to get feedback here also.Scenario - we have a customer using v12 with latest patches sending data to one of our DCs with Hitachi HCP Cloud Scale cluster which is very large.  They are sending over 20PB of data to us.Object Lock is turned on for some of the buckets and we are seeing billions of gets/puts/list commands which is causing havoc on the cluster worker nodes for HCPCS.The client has configured their jobs with the default block size of 1MB and we were thinking to change that to 4MB, but it would not make sense for 106-byte files.  That is the sizing of the files we are seeing the issue on for three buckets of which 2 of them are Windows servers and one is Linux.Any thoughts or has anyone run in to this before?  I am working with Veeam and Hitachi together as well but if this rings a bell for anyone your input would be great.Thanks.

I’ve added a shared mailbox to an existing backup job this morning - the mailbox is 7GB in Office 365. The job completed a little while later but in the summary I see “Transferred: 419.6 MB (25466 items)”. Those figures don’t add up, so I’d like to investigate more but I can’t see a way to show the backed up data size for any mailbox. How do I do that? 

Hi Folks,(I don’t want to be mean but… sales people can quite seriously perturb me. I don’t know if it is because I assume immediately that they think I am some kind of spaced out idiot, or perhaps that as Don Corleone said “nothing personal just business” i.e. they are mass sending messages using AS (Artificial Stupidity) to change the name etc. I am getting more and more of the following on Linkedin like this today  “Hi Goff (so much for AI.. at least it won’t be taking my job in the near future), we noticed that you are a Veeam Professional (what in the name of the Salisbury soccer team is a Veeam Professional?, is that some kind of new certification? have I overdosed on Veeam swag and now been permanently branded a VP (alas not Vice President). Then follows the ingenious sales pitch. “you might be interested in…...” The minute I see “you might be” there is macro in my amygdala that furiously injects the word NOT into the sentence. I have long s

Hi,I’d like to add Recovery ISO to boot menu so that I don’t have to use USB. Is there a way to do it?

Hello everyone! Recently I installed a new VEM, however I notice that configuration button is missing on the right corner: Am I forgetting something?I presume it is a permission problem, but I cannot remember that.

Hey Community, we have Customers, which have quite a big Physical Infrastructure. It would be really Helpful, if the Protection Groups can not only be having Top Level Folders, but 1 or 2 Subfolders for Organization. Something like:Steel Production Hot (Protection Group) Cold (Protection Group) North Wing 1st-Floor Management (Protection Group) Sales (Protection Group) 2nd-Floor Technic (Protection Group) Engineers (Protection Group)  If you are thinking different or have a better solution for my Problem, i would be happy to hear/read what you have to say. GreetingsMathias

VeeamON 2023 has officially concluded! 🎉The biggest event for data recovery experts brought together community members online and in Miami. Veeam Legends and Vanguards were given the opportunity to travel and join Veeam in-person this year for VeeamON. Over 60 Legends/Vanguards from across the world traveled to Miami this year, as well as 6 VeeaMVPs who were also present in Miami. Let’s recap the community involvement at VeeamON this year.   Presenters  – VeeamON 2023 had the greatest presence of Veeam community members out of all VeeamONs yet. Over 20 Vanguards/Legends/MVPs presented their ideas and expertise to the public this year. Breakout Sessions:

Hello everyoneI have this backup job fail for several days now , I cannot create backup the error is as follows:6/12/2023 1:12:07 AM :: Error: Data error (cyclic redundancy check).Failed to read data from the file [B:\…..rds17\…...\Terminal Server 17_1.vhdx].Failed to upload disk. Skipped arguments: [shadowSpec>];Agent failed to process method {DataTransfer.SyncDisk}.Exception from server: Data error (cyclic redundancy check).Failed to read data from the file [B:\…..rds17\…...\Terminal Server 17_1.vhdx].Unable to retrieve next block transmission command. Number of already processed blocks: [119].Failed to     

Hi folks,Can someone explain to me “the programming dummy” this word mutex? Is it just a log shock and awe term, i.e. someone like Geoff sees something “mutex” in the logs and thinks back to Grade 10 Math and makes a quick retreat? 😁Recently I have seen this word in different logs and wanted to double check with the pros before I press the terrifying search button on google. (I say that because I had a red mark on my face and thought I should google, it basically told me all the horrible things that it could be, until the unsponsored answer way at the bottom had a nothing to worry about explanation)!!

I have backup job on one of my VM windows server 2016 . I set up backup job and it show this warning and completed with an warning, 6/7/2023 2:04:27 AM :: Failed to index guest file system. VSSControl: Index failed Details: vss::CVeeamIndexingProvider::NetTryCompleteIndex. Failed to complete guest file system indexing in network mode. checked the  have the Enable Guest File System Indexing in the backup job configuration setting. can you help me solve this problem with suggstionthanks​​​​​​​

Hello,We are going to set up a backup copy of a vm on a compatible S3 storage, and we will apply a GFS policy.Immutability is activated for 7 days on the object storage.Can you confirm this information below? Do you have a veeam article that explains this?The immutability of GFS backups is not based on the immutability period defined in the Object Storage Repository, but on the retention period of the GFS backup point (e.g. Annual with a retention period of 7 years will have immutability defined for 7 years, so it won't be deletable for 7 years).

Hi,With VAMW, can I exclude some folders/files in Volume backup?Thanks

Hi,I was trying to restore individual files after booted in using the Veeam Recovery Media ISO (from USB stick) but not like in Windows it only supports restoring volumes I guess or am I missing something?  Thanks

If a backup copyjob shows one vm in the job in a warning status that says “Waiting for backup resources availability”; did that particular VM actually copy over or did it ultimately fail to copy over?

My final Veeam Update. The aftermath! It did not take long for my swag to disappear. This time Alfred the Legend Cat and the Veeam Teddy bear I found with their new friend Carlos. Carlos is highly trained in DH, “Dealing with Humans” so he always opens his eyes slightly when people approach, just in case, the old trust but check thing :) If you look closely below in his den you will also see the Cloudian Ninja hanging out as well.  Carlos 

hello, my problem is the following: I have a backup job scheduled at 5 p.m. and a continuous replication job on one of my virtual machines.  So it happens that the 2 tasks are done at the same time.  When that happens, my VM no longer works (it seems frozen, it can no longer be reached by ping, nor by remote desktop, the database it contains is no longer reachable either).  I am therefore obliged to stop one of the jobs.  help me please