Discussion Boards

I’m going to be likely setting up a new client on a VBR VM with a local NAS as their primary repository (I know...I’d rather do a purpose-built physical server but cost is an issue) and Wasabi object storage for an off-site copy (and likely replication to 11:11 Systems VCC for DR).  I’m curious now that we have backup to object and copy to object capabilities, what you folks are doing for that second copy?  Traditionally I obviously have used a SOBR using Wasabi as the capacity tier in Copy mode (move mode disabled *usually*, but I just noted that I’m performing copy and move for my internal server) so that I had the data in both locations. However, now that we can backup and copy direct to object, curious if anyone has abandoned the SOBR and are instead using a copy job to send data to the object storage and are keeping the data there with the traditional copy job managing things.  @Nico Losschaert posted a debate about the pro’s and con’s of this a couple years ago at the below link,

Hi, we have Veeam backup for Azure all setup and running and its been a couple of months. We have private network deployment with private endpoints in our environment with premium service bus and all subnets are allowed to access this service bus. We have 5 backup policies in total, 3 of them have been running fine but 2 of the jobs (with our file servers), the snapshots are running fine but the backup policy is getting failed after 4/5 hours of the session run with an error :Failed to perform backup of vm1 to Production Backups Repo 1. Worker VBA-5bf0973a-8e2c-4dda-ba63-28814324c1bb: getting of the job status failed (trace ID: b8b3fb4e-c7f0-4f86-aa22-4f2122f45b00)We have noticed that when the backup policy session starts, it backs up the data all the way to 60% percent and then it stuck for a very long time before erroring out this message. We have raised a support case with Veeam and they said they will need to check with their R&D team, as we have the same settings for all jobs

Hi, I would like to know that can we directly restore from tape for VM backup with HPE Store as disk storage Thank you

Hello everyone. I’ve been beating on this for a week and have finally given in to post a question here. I have the plug-in installed and it works great. Very easy to setup, and it just works.The problem comes where I am not very familiar with MS SQL. I would like to get email notifications for the database backups. It appears that this needs to be configured within SQL Server Management Studio. I have database mail setup and it can send test messages, but I can’t seem to get the SQL agent job for the database backup to kick out an email when it completes.Has anyone attempted to get this working who can provide me with some information?Thanks,Joe

on the new Ubuntu hardened repository i have set make recent backup immutable for 30 DaysOn the Backup Copy Job i have a retention Time 30 Days and GFS for 1 MonthsIs this Settings correct ? 

Hi everyone,I have an issue with my Veeam Media Recovery iso for Windows. I would like to use it on an Openstack cloud platform, but this iso won't boot.I know that Veeam doesn't support officially this, but I'ld like to know if somebody here try this ?The iso was generated from my Veeam B&R 11.0.1.1261 on a Windows 2016 server backup.Here what I tried :  - testing the iso on VMware environment = work  - upload the iso on Openstack  - run the iso with a flavor which have  1 cpu, 2Gb RAM and 1Gb HDDresult = No bootable device was found  - create a volume from the iso  - make it bootable  - run the volume with a flavor which have  1 cpu, 2Gb RAM and 1Gb HDDresult = No bootable device was foundFor your information, the same step work very well with my VMR iso for Linux on my Openstack platform. I have this issue only with WindowsThanks for your help

HelloIm looking for an openshift backup solution and would like to have details about kind of objects can be backed up with Veeam\Kasten.I guess that backup of Deployments, DeploymentConfigs, StatefulSets and VMs is a “must” so what about ability to restore, if necessary, a simple secret, service-account… Can we do that?Another topic, it is possible to create a SLA selecting as source of data an specific project? Where can I find out detailed product features?Best Regards

Hi all, last week I deployed a new storage array.  I’ve migrated all production VM’s as well as replica’s that resided on the datastores, except for CDP replica’s.  I cannot for the life of me figure out how to migrate the CDP replica’s and update the CDP policy to point to the new datastores. Storage vMotion inexplicably gets cancelled by a user later on - assuming that’s VBR even though I currently have the policy disabled.  That said, I can’t modify the specified datastore below as well - all is disabled.  I thought I might clone the policy, but it looks like CDP policies can’t be cloned like backup and copy jobs - not a big deal but also caught me off-guard.So am I missing something, or do I need to recreate the policy and restart replication from scratch?  

Hello all,I’m currently testing Veeam for Salesforce. All works fine. I just don’t manage to get eMail Alerts up and running. I set the alert and the Connection Setup to Microsoft O365 with classic connection. When sending Test email I receive Error: G6HH: Notification channel configuration is invalid, please verify your settings.Trace Id: 293b541a6b68e109Can anybody help me with this error msg?ThanksRainer

if I have a backup job with GFS, and then the job is saved in a backup copy job, will the GPS backup also be taken over or do I also have to set GFS in the backup copy job?

Hello everyone,have you read the latest news?https://www.veeam.com/news/cirrus.htmlIntroducing Cirrus by Veeam – Backup as a ServiceI understand that it is a SaaS, but what are the major differences in functionality with the existing Veeam products (Veeam backup for Azure and Veeam backup for 365) ?What will be the implications on future developments of the respective solutions? Edit: I’ve just found a post on Veeam Forum with the same argument, let’s follow the progress  https://forums.veeam.com/veeam-cloud-providers-forum-f34/cirrus-clarifications-t90286.html

Just a quick info for the community, as the deadline is today at 08:00PM/20:00 PT.VMware is doing a challenge on their Hands-On Lab Plattform via VMware Odyssey. There are 4 different labs which prepare participants for the VCP DCV (Datacenter Virtualization Professional) exam. In each lab one can collect points and the top 10 receive a price.At the moment there are less then 10 people in the leaderboard, which means, if I get it right, chances are high to win a prize 😉VMware Hands-on Labs Request

Thanks to all those that voted for the next VUG Canada topic for our November 29th session.  We will be discussing Architecture Design & Best Practices so stay tuned for a great webinar.VUG Canada - November 29th -- TOPIC - Architecture Design & BP | Veeam Community Resource Hub@Tyler Jurgens @hinmeister416 

Hi all, we have a physical server DL380 Gen10 with ubuntu LTS that use for Veeam immutable backup. we want to expand the existing repository RAID with anther 9 disks.do we need to break the existing RAID or it’s possible in ubuntu to expand the existing without break?Thanks

hi,  I would like to know, can I keep yearly without monthly on tape with GFS feature ?thank you

Hello,I'm facing a challenging situation with our Veeam server and vCenter, and I'm seeking assistance to resolve this issue. Here's the scenario:Our Veeam server is not part of our domain.Our domain computers are signed with our Domain Controller (DC) as their root certificate.The vCenter is  not part of the domain.However, the vCenter certificate is assigned by our DC, which acts as the root certificate authority.The primary issue arises when attempting to update the vCenter. I encounter an error, and I've attached a screenshot for reference.Furthermore, it's worth noting that our Veeam server is also not a member of the domain. We are utilizing Veeam Enterprise Manager.I am seeking guidance on how to resolve this matter. What steps or configurations should I consider to ensure a smooth update process for our vCenter and resolve the certificate-related errors?Any help or insights would be greatly appreciated. Thank you in advance for your assistance.   

I’m running Veeam Agent for Microsoft Windows 6.0.2.1090 - Free Edition on my Windows 11 PC and I’ve never come across this issue so far:Open Control Panel Run restore Individual Files Select a backup date browse the backup and select a specific file the file is shown in its current state, not in the state at the time when the backup was run. Even non-existing files at backup time, created after the backup was taken, are shown in the backup treeIs it a bug? Am I supposed to set some configuration parameter?I used to navigate the backup tree and select individual files to restore specific files in their state at the time the backup was run.Thank you in advance  Vieri

Greetings everyone...I am working out the resources for physical backup server with local disks. Might I know if my workout is correct?Data size: 30TB (Exchange + File Share)Policy: 30 daily, 4 weekly, 12 monthly, 3 yearlySource: Sangfor HCI (requires to install agent), single siteAs refer to VSE https://calculator.veeam.com/vse/Backup Server + DB + Repository = 8 CPU, 20GB RAM for Veeam to work(No Proxy and Enterprise Manager required)And will add some resources for Windows OS Regarding storage, 249.43TB from VSE  So I add some buffer and for Windows OS with ~300TB disks space Assumptions:ReFSNo backup copy jobGeneric Pessimistic: daily change 10%, compress ratio 50%, annual growth 10% Is my thinking correctly?

I have a customer on Veeam v12 which backs up to Data domain. Veeam performs a copy job to another mtree, then the DD performs a DD replication to a central immutable DD.Customer has space issues but we are seeing old veeam backup files still on the DD. We did a delete from disk for an old backup, but the file is still on the DD.Any recommendations or seen this sort of behaviour?I’m questioning whether Veeam is cleaning up old data. Backup copy retention is only 5 days.

Hi Everyone,VUG Canada will be holding our next event on November 29th, and we need help to finalize the topic which we have narrowed down to two.Please go here and vote - VUG Canada - November 29th Meeting TopicsThanks,VUG Canada Leadership

Hello, Last night our backup job took much longer then normal Looking through the job history I saw one user with 51GB of data processed. This is very much out of the norm for him. I asked the user if they had done anything or added any folders and they are not aware of anything.My questions is, where or how can i see a log of the files processed, or even a compare feature from last nights backup to 2 days ago. I am just not able to find an easy way to see what was the 51GB that was processed.

Veeam has recently been upgraded from 11a to v12. Post upgrade we cant get into the web interface for Veeam ONE. Client app works….I’ve checked IIS, local logs etc, cant see anything….anyone seen this?  

hello, can I use socket based licenses (currently in use on a VBR v10 server) for a new VBR v12 server? Or is there some kind of conversion/upgrade process involved?kind regards,Wim

I have a physical server with VBR 12 installed, the customer now also wants VBM and as repository the same as VBR, Say what against installing VBM on the same server as VBR?

Hi, I created new jobs to organize Exchange groups and Teams groups since my company was previosly configured to backup the whole organization, Now that the backup is set up and backing up for about a month is time to disable the original job, if I disable and delete the job, would that release the previously used licenses for any aditional user that is not on the new jobs ? Thanks in advance.