Skip to main content
  • EN

Discussion Boards

Join discussions around Veeam community projects, Veeam events, industry and technology news

  • 2,817 Topics
  • 26,327 Comments
2817 Topics
Chris.Childerhose
Chris.ChilderhoseVeeam Legend, Veeam Vanguard
asked in Discussion Boards
SOBR and XFS - Placement Policy

Quick question to the community -We are troubleshooting some Linux XFS SOBR issues.  I know for ReFS you need to use the Data Locality policy for the Fast Cloning and wondered would the same apply to XFS?I would think that it does but on the off chance I can change it to the Performance policy it might help us get over the hump for our issues and then I can swap it back. These repos are NOT immutable at the moment either.

4
Chris.Childerhose
3 years ago
P
pk101New Here
posted in Discussion Boards
Storage full but does not match VEEAM used.....??

Hi All Had a case open with VEEAM and NetApp neither of which is going anywhere pretty quickly, so will throw it out there and see if anyone has any ideas.We have a large estate broken down in to areas which mirror the configuration of each other so a nice lot of reference points.NetApp 16Tb LUN and 16TB volume mapped to a Veeam backup server.The client wrote a lot of data to this back up location and took it offline. So we cleared snapshots down and brought it back online. When the mapped drive was browsed it could be seen there was a lot (TBs + TBs) of “Dead” VM backup files VEEAM advised these could be deleted which they were.However the adjustment hasnt carried through to the storage end VEEAM UI thinks there is 11.9 Tb free NetApp only 2 Tb ** After Storage Snapshot removal Have stopped the jobs reset the storage passwordRe-scanned the storageRe-scanned the appropriate repository.Any thoughts at all ..? P

8
Chris.Childerhose
3 years ago
Chris.Childerhose
Chris.ChilderhoseVeeam Legend, Veeam Vanguard
posted in Discussion Boards
Veeam AWS 3.0 - Patch 1 released

Veeam has released patch 1 for anyone that uses the AWS agent.  Notes here - https://www.veeam.com/kb4094 

0
Chris.Childerhose
3 years ago
T
texastigNot a newbie anymore
asked in Discussion Boards
Run Veeam Endpoint twice a day.

I tried to search for Run Veeam Endpoint twice a day, but nothing came up. I heard their was some scripts. Could someone point to some?Thanks.

5
Mildur
3 years ago
O
omar.desouzaComes here often
asked in Discussion Boards
Veeam O365 Backup Applications

Hello, I created 10 new auxiliary backup applications into my organization. How could I know if my backup job is using all the new backup applications?Thanks in advance, Omar De Souza.,

3
Mildur
3 years ago
MicoolPaul
MicoolPaulOn the path to Greatness
posted in Discussion Boards
Veeam Backup for Office 365 5c Released

Veeam have snuck this update out late in the day! Veeam Backup for Office 365 5c has been released! Full notes hereIn addition to the key Teams bug fix that has been doing the rounds as a hotfix there seem to be mainly other Teams related fixes such as inability to backup chat messages newer than October 2020 and Backup Proxies out of memory when backing up to object storage! Time to get patching! Thanks @Mildur for clarifying it’s a CU for 5c as 5c was released earlier this year!

4
Nico Losschaert
3 years ago
Chris.Childerhose
Chris.ChilderhoseVeeam Legend, Veeam Vanguard
posted in Discussion Boards
VUG Canada - Sign Up now

Not sure how many people check the Events section but the first VUG Canada meeting is happening on September 21st. There are only two attendees including myself so be sure to sign up. We have Rasmus attending 😎https://community.veeam.com/events/sept-21st-rasmus-haslund-at-vug-canada-meeting-56Hope to see more people there.

3
Nico Losschaert
3 years ago
P
PaulDNew Here
asked in Discussion Boards
Veeam Cloud Connect Question

Hi,We’re a long time user of Veeam B&R and it’s worked very well for our on-site backups.I’m now testing/evaluating Veeam Cloud Connect with a UK based Veeam CSP (PeaSoup) to additionally backup some of our critical VMs to a Cloud Repository. This is a 5TB trial, but I’m not sure if this has any bearing on my question.This is my scenario:When running a Cloud Connect Backup Copy Job containing 15 VMs only 2 of these VMs will ever be running/active concurrently. The other VMs will be “Waiting for backup infrastructure resources availabilty” until 1 of the active backups completes and then the remaining VMs are processed sequentially; but never more than 2 concurrently. Whilst I understand what this means, I’d like to know what “decides” this limitation.So my questions:Is it an internal Veeam algorithm, available bandwidth or is it the Cloud Service Provider that “decides” this? As a trial user is it possible that we’re being limited to 2 concurrent connections by the CSP? Is it a “ha

14
Nico Losschaert
3 years ago
A
AbelaNot a newbie anymore
asked in Discussion Boards
Executing shell script inside a guest OS after backup completion

Hello there,I want to execute a shell script inside a guest Linux VM automatically after a backup job is completed. I wonder how can i achieve this. What is the best way for me to do this?

5
MicoolPaul
3 years ago
D
dmarkhamComes here often
asked in Discussion Boards
Rebuilding a Veeam Repository server

I have a customer that needed to rebuild the Windows VM that was acting as their Proxy/Repository server at their secondary site.    He is using all of the same IP information on the new server.   The repository itself is on a NetApp E-Series access via iSCSI.   Once the server is rebuilt, what is the process for getting it back into the B&R server.   If the server is the same name, will the B&R server just need to push out the Veeam proxy/repository services to the rebuilt VM or will we need to delete and re-add the proxy and repository to Veeam?   If we discovery the repository LUNs on the new VM via iSCSI will we need to re-scan the repository to discover the backups or will they just be there?If there is a process document for doing this it would be appreciated. 

16
JMeixner
3 years ago
vNote42
vNote42On the path to Greatness
posted in Discussion Boards
See Veeam at VMworld 2021

Many are already tired of participating in online events. But I think a lot of the community will join VMworld 2021. Which is a 100% virtual event again.Join VMworld 2021 (free):https://www.vmware.com/vmworld/en/index.htmlFind Veeam at VMworld 2021:https://blogs.vmware.com/vmworld/2021/08/see-veeam-at-vmworld-2021.htmlA few announced Veeam-sessions:Designing for Disaster, Design vSphere for Disaster Recovery with Veeam [MCL2834S]. [Melissa Palmer (@vmiss33)] Quelling Cloud Chaos: Data Protection for Any VMware Cloud Solution with Veeam [MCL2832S]. [David Hill and Anthony Spiteri] The Kubernetes & Data Conundrum Untangled with Veeam [MCL2833S]. [Michael Cade (@michaelcade)]

6
Nico Losschaert
3 years ago
O
omar.desouzaComes here often
asked in Discussion Boards
Veeam O365 backup job stopped to work and cannot start it again

Hello,I created a new backup job only for Mail and Archive 2 weeks ago, it was working fine doing the full backup, but today I found that it was frozen, I restarted the Windows Server (weard, it took too much time), but I cannot start the job manually again, I receive a message “synhronisation failed”, I reconfigured the organization authentication but it doesn’t, also now when I try to rescan the proxy (that is the same server), there is an error: “this request operation sent to net.tcp://127.0.0.1:9193/ProxyAdmin did not receive a reply within the configured timeout (00:01:00)”. I tried to restart the Veeam Proxy Service, however it didn’t work, then I restarted the server again (it took too much time again) now the Veeam Proxy Service is up again, but the problem persists.Do you have any idea?Thanks in advance. Omar De Souza.

6
Chris.Childerhose
3 years ago
O
omar.desouzaComes here often
asked in Discussion Boards
Veeam O365 backup job very slow

Hello, We have a Veeam Backup O365 5.0.1.225 with a new backup job created two weeks ago, only for Mail and Archive. I think that the performance is too slow, the processing rate is 5.4MB/s, bottleneck: source, read rate 3.9MB/s and write rate 5.8MB/s. Is that normal? Our bandwidth to Internet is 280Mbps  (35MB/s), download and upload,how can I troubleshooting this problem? Thanks in advance, Omar De Souza.

5
Chris.Childerhose
3 years ago
Chris.Childerhose
Chris.ChilderhoseVeeam Legend, Veeam Vanguard
posted in Discussion Boards
Dell EMC PowerMax - Plugin Available

For anyone that uses Dell EMC PowerMax/VMAX there is a new plugin for Veeam just release and can be found here -KB4200: Release Notes for Dell EMC PowerMax Plug-In for Veeam Backup & Replication 1.0.84Great to see many storage vendors getting plugins to leverage snapshots for backup. 

6
I
3 years ago
Chris.Childerhose
Chris.ChilderhoseVeeam Legend, Veeam Vanguard
posted in Discussion Boards
VUG Canada Event - September 21st

If anyone is interested in hearing from Rasmus as well as some information about v11 feel free to attend the VUG Canada event -Sept 21st: Rasmus Haslund at VUG Canada Meeting, Tue, 21 Sep. 2021 at 13:00, America/New_York | Veeam Community Resource HubIt will be the first one and is at 1PM eastern standard time if you can make it.@Geoff Burke @Inder 

0
Chris.Childerhose
3 years ago
vNote42
vNote42On the path to Greatness
posted in Discussion Boards
[post digest] How to protect your organization from ransomware attacks

Just read a Veeam blog post about how to protect your organization from ransomware attacks. Because we cannot talk enough about ransomware-protection, I want to give a small summary of the blog post here. Consider it as an invitation to read the original post carefully! https://www.veeam.com/blog/how-to-protect-your-organization-from-ransomware-attacks.html Attack Vectors – often started at endpoints Phishing emails, with/without download links Reuse of compromised user identity Brute-force attacks Exploiting vulnerabilities DDoS attacks   Countermeasures Patch and keep your systems Apply strict MFA for all remote to avoid brute force attacks Protect user Protecting the endpoint Traditional antivirus is no longer enough Email security Data protection Backup, backup, backup 3-2-1 Rule Visibility Monitor ransomware attack specify metrics I personally add: train your employees Other related actions to reduce risk  However, nothing is guaranteed to prote

9
vNote42
3 years ago
regnor
regnorVeeam MVP
posted in Discussion Boards
VBO365: Object reference not set to an instance of an object (Teams)

I have just discovered on Twitter that there’s currently a problem with Teams Backup in Veeam Backup for Office 365 which could affect many installations.It looks like Microsoft did change something on their side and so Teams backup is failing with the following error: “Object reference not set to an instance of an object”If you are affected by this problem, you can request the hotfix from Veeam Support.Here is the corresponding R&D forums topic: https://forums.veeam.com/veeam-backup-for-office-365-f47/teams-backup-failing-with-object-reference-not-set-to-an-instance-of-an-object-t76162.html

16
regnor
3 years ago
D
DCC ThoasterNew Here
asked in Discussion Boards
Email notification has stopped working

Test Mails via Veeam Windows free agent 5.0 work fine!However notification after backup do never arrive anywhere.Checked and found out, that other users encouter the same problem.Problem started after upgrading or installing Version 5.Hope to get a solution soon.RegardsMichael

4
Iams3le
3 years ago
wolff.mateus
wolff.mateusVeeam Vanguard
posted in Discussion Boards
Copy Files to Azure with Veeam

Hello everyone! I have a case here that is about to copy some files on a Linux machine to a blob on Azure.These files are not generated by Veeam. So, I just like to know if it possible to take this files and upload to Azure through Veeam B&R. What you think about it?Any idea or tips?

8
Nico Losschaert
3 years ago
A
allezyyoungNot a newbie anymore
posted in Discussion Boards
email notification when a job is successful veeam agent for microsoft windows

have anyone encountered such on veeam agent for microsoft windows?

4
Nico Losschaert
3 years ago
Chris.Childerhose
Chris.ChilderhoseVeeam Legend, Veeam Vanguard
posted in Discussion Boards
Veeam - BaaS & DRaaS

If anyone is interested in Veeam for BaaS or DRaaS then you can find some helpful videos on Youtube here - (36) BaaS and DRaaS - YouTubeIt looks at what BaaS & DRaaS are, how to choose a provider and also if you are an MSP then deploying VCC.

3
Nico Losschaert
3 years ago
Chris.Childerhose
Chris.ChilderhoseVeeam Legend, Veeam Vanguard
posted in Discussion Boards
VMware - Version 7 Update 2c - RELEASED

Anyone that uses VMware might want to check this out as they just release Update 2c for version 7.VMware ESXi 7.0 Update 2c Release NotesVMware vCenter Server 7.0 Update 2c Release NotesThis includes both vCenter and ESXi.

12
Chris.Childerhose
3 years ago
SimonYarwood
SimonYarwoodComes here often
posted in Discussion Boards
VMCE Certifications Q&A

Do you have any questions about achieving or upgrading any VMCE certifications? Ask and you’ll get an answer

13
MicoolPaul
3 years ago
bp4JC
bp4JCInfluencer
asked in Discussion Boards
Long running copyjobs seem to "start over"

Hi, everyone I have some copyjobs that have been running for a significant amount of time due to a catchup-scenario we are in. I have noticed that on some of the jobs, it seems as if they start over. I check the jobs at some point the next day, and instead of the “Last Run” column showing days, I will see 8 hours ago, 3 hours ago, etc. The job will still be in running status. But it also looks like the job may not have started over. These jobs are immediate copy.

12
Chris.Childerhose
3 years ago
coolsport00
coolsport00Veeam Legend
posted in Discussion Boards
I'm Sure You've Head, But If Not...Watch Your SD Cards! with vSphere 7U2!!

For those who don’t go to the VMware forums (another ‘communities’ based vendor website) often, there was finally a VMware employee who somewhat unofficially acknowledged the issue of running ESXi on SD cards, specifically with vSphere 7U2. I say U2 because v7 and v7U1c, of which I both have run on DELL IDSDMs, runs flawlessly; and has for the past year.To read a little more on the issue, you can review the VMware Communities post here. The issue, it seems, has to do with their newly formatted boot partitions. But honestly, I think the mishap (Hosts disconnecting/hanging) is mostly due to a new vmkusb driver. VMW is currently working on a fix, though they’re really recommending orgs to start using ‘high-performance’ storage (i.e. disks) for the boot  device moving forward. All that to say is, if you haven’t upgrade to 7U2, I recommend not to. If you’re running your boot on disk, I think you’ll be fine. Otherwise, hold off. One of the Veeam Vanguards, Luciano Patrao, did a nice little p

23
regnor
3 years ago

Badge winners

Show all badges
Terms & Conditions