Discussion Boards

Hello!I am trying to play with restoring one Hyper-V VM onto another Hyper-V server just to know what to expect in the future.So I created the Backup job which backed up this VM to the Backup repository which in turn resides in the shared folder of the second Hyper-V physical machine, i.e. is the part of the second server.After back up is done (very fast!)  I started Restore job of the Entire VM, and it fails. I tried all possible scenarios : restore entire VM, immediate restore with the following migration, I tried even importing this backup and restoring VM from imported file - ALL FAILED with the same symptoms: restoration starts very optimistically and energetically, going to the point of 45-46 GB of vhdx restoration, stops, nothing seems to be happening, only process timer shows it is still alive and ticking, and this frozen state continues for 5 to 8 hours just to get this ChannelError: ConnectionReset. Thank you!

Greeting,I'm trying to put together a solution for saving backups to a remote location.I created a batch procedure that installs Wireguard to the remote storage and transfers a complete backup using the Robocopy program. This solution turned out to be the best, regarding reliability and bandwidth utilization.The problem is the following: I expected that the .vbk file changes only once during retention time when a synthetic full backup is created, so that Robocopy sends me only incremental files daily, however it seems that is not the case because every day I also receive a 200GB .vbk which is not acceptable since it is uploaded at a speed of 50 Mbit/sec. Have I misunderstood something or am I doing something wrong?Please comment...

Hello,I am having problem syncing my backup files with dropbox. The problem comes from my vbk files which is around 1.9TB now. Dropbox needs 2 days in order to complete syncing that file, and if in the middle PC shuts down or goes into sleeping mode the syncing process will be reset (need 2 days again to sync).Moreover, when syncing Veeam Agent can’t proceed incremental backup because backup files are being used by dropbox. Last but not least, I thought the vbk file would not be changed (so it just needs to be uploaded to dropbox once) but I was wrong. So once there’s a change on the vbk file dropbox will need to upload a whole new vbk file again (needs 2 days syncing again).So, I wonder if anyone here has experience on this situation could give me some advice on it.Many thanks!

I ask about experiences with Veeam and HPE StoreOnce deduplication source-side, if they know how to configure it.

Well, it feels inevitable that this change was coming. Red Hat is starting to withdraw the source code of Red Hat Enterprise Linux (RHEL) from public availability. Instead, only the source code of CentOS Stream will be publicly available.What does this mean? And why do I say this was inevitable? Let’s start by looking at the RHEL project, and how Linux is maintained in general. First, we have the generic Linux kernel project, the basis of Linux. From here, we get “distributions” or “distros”, such as Ubuntu, CentOS, and RHEL. We call these “downstream” of the Linux project. The goal of these distributions is to take the Linux kernel and customise the kernel in ways that best suit the purpose of the distribution. Applications and specific patches related to the integration of the kernel and bundled/supported software will be maintained at this

Being new to the tech industry, I am just looking to broaden my skill set. What area is good for beginners? 

Cannot auto-update from 5.0.3.4708 because the digital signature of the downloaded update file is invalid!This is happening on three personal computers at two different locations.I had to download the update from the website and manually update.Not a big deal but what is up the the auto-update utility?  

Hi All,I have been using BR for many years and backup (with ease) 30 servers and 110Tb of files via the network. Servers to disk then tape and the 110TB direct to tape (twin LTO8’s)The 110Tb system is a VM that I do not backup - too big (and in Veeam format), so I only back up the files 50Tb and 60Tb drives as two jobs. Its monthly weekend work so no big hassle (with daily increments). Working well.(I back the files not the VM as it would need another 110Tb to restore to - which I dont have and if I wanted a file or folder I would have to restore the whole VM etc + time   110Tb on Dual LTO 8 still is 35 hrs). Add to that I dont have 100Tb Veeam Repo size either ….With the licence changes (based on 500Gb per licence ..this is now becomes cost ineffective ...approx. addition 190 or so instance licences required on top of the 40 I have). Just cant afford it.So my question is:Can I remove the tape solution from Veeam BR12 and use t

Hi all,i recently did an upgrade on a customer site to V12. Within our legacy Backup Copy jobs, i could select the “Objects to process” by a VMware vSphere Tag, per example by “business-critical”.Within a new Backup Copy Job (both periodic and immediate), i have only the option to add Objects by “From backups” and “From jobs”.With tags, we had the option to filter the VMs that are processed very dynamically.Am i the only one, who is missing this feature?  screenshot for example:  thanks and best regardsMarkus

 I had M365 backups working flawlessly and then needed to switch repositories. Somewhere in there, something broke. So I ended up removing the repo, removing Veeam M365 backup, cleaning up all app residue and re-installing from scratch, since this was a new, small instance and I just wanted it to be clean.Now, every time I try to run a backup against the same recreated Org, the job will connect to the org, start resolving the objects, it finds the objects to backup but never actually receives any data. Shortly thereafter (30 seconds or so), the proxy service crashes and the portal shows status “disconnected” and Details “Job was interrupted”.I have even tried putting it on a different VM and the same behavior persists. The only element that I haven’t recreated is the O365 implementation. I have also recreated the Azure apps/certs each time as well.The logs don’t seem to show much. Below is the end of the latest log as well as the console view and some eve

I can’t see replicaset workloads in K10 dashboard which are in a namespace in my cluster. But it displays all other workloads (StatefulSets, Deployments).Any thoughts ?Thank you.

I have two NVMe SSD-s. One has Windows 10 installed, the other one has Linux Mint 21.1. I boot from the linux one, it has an entry to windows as well.When I am backing up the linux system with veeam, I have a warn: The linux partitions looks like this: szabkel@mint10900:~$ sudo fdisk -l /dev/nvme0n1[sudo] password for szabkel: Disk /dev/nvme0n1: 931,51 GiB, 1000204886016 bytes, 1953525168 sectorsDisk model: Samsung SSD 970 EVO Plus 1TB Units: sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisklabel type: gpt

We’re trying to do a rolling OS upgrade of two physical servers in a Window Failover Cluster. The roles/resources are two Storage Space disks holding >20Tb of data each. When we add a new node to the cluster, Veeam is insisting on a Full backup of each shared disk, which is not ideal. According to documentation at the link below, this appears to be “by design” but this is very painful and our only option is to significantly expand the size of our backup target. Is there any way to skip this full backup requirement? We do weekly synthetic fulls, so I added an additional one to the schedule but it still insisted on an actual full, not synthetic. From a technical standpoint, I could understand needing to reset or ignore CBT and do a scan of the whole disk, but this is the only backup software I’ve used that arbitrarily requires a full backup when cluster node changes happen. Does this affect other cluster workloads like SQL or VMs? I had planned on moving

The final week of June has arrived! As we mentioned earlier, we had made a commitment to conduct a poll to determine the top blog of the month, which will be featured on the homepage during the first week of July.For this month, we have a special edition in which we will consider blogs from both June and May. This is because we had skipped our May edition due to VeeamON Miami. We want to ensure that all the deserving blogs from both months get a chance to be featured.Our selection comprises of three blogs that were featured in the weekly recap, as well as three additional blogs that were not mentioned. Please help us determine the best by voting on your favorite one by June 30th .   Good luck to all participants! 😊@MicoolPaul , @benyoung

Hi Folks, I have someone who ran out of space on their Linux immutable repo, they are asking to remove immutability on the fs (chatter -i) as root. I am wondering what Veeam DB will think? and what other issues might arise. They seem to say they have done it before then just rescanned the repo? 

In the blog post below it states the sources that support the backup of Direct to Object but do all of these also support the restore of the data Direct from Object without having to go through a Gateway server or Proxy?  Specifically when S3-compatible storage is being utilised.Virtual machines backup (VMware,HyperV,AHV...) NAS backup Backup copy SQL, Oracle Configuration backup Veeam agent 

Hello everyone 🐈🛫 Similar to previous year, I am disclosing the dates for VeeamOn Tours and Forums 2023. Please register in here: https://go.veeam.com/veeamon-regional-2023 Here we go:  EMEA :VeeamON Tour Ireland- 20 June 2023, Dublin  (https://go.veeam.com/veeamon-tour-2023-dublin )VeeamON Tour Romania- 22 June 2023, Bucharest (https://go.veeam.com/veeamon-tour-2023-romania )VeeamON Tour Austria - 13 June 2023, Linz (https://go.veeam.com/veeam

Hi Veeam Community!We are looking to migrate our backups from a standard repository to an SOBR in order to utilise Wasabi storage for capacity tier. We current have backups jobs storing to local storage repository with 30 day retention, with copy jobs to a another backup repository at one of our other sites for offsite/archival backup purposes. Local repository is around 30TB and ‘offsite/archive’ repository is around 100TB. Ideally we would like to move the primary repository to performance tier of an SOBR and remote repository to capacity tier. Is this a supported migration, or will the backup copy job part cause us issues? Ideally we would prefer not to have to create new jobs, and maintain backup history. We are running B&R V12. Any insight or tips on how to achieve the above would be greatly appreciated.Thanks!Cameron 

Hi everyone!I have new Vms window 2019 serve. it is new and I don’t understand why it complete with Warning. on the same Veeam application I have more than 12 other Vms  which have larger file and alot programs. but all of the completed success. but this new VM show warning:6/26/2023 12:38:44 PM :: Unable to perform guest file system indexing: Failed to install via Deployment Svc    

Has anyone got an error about a Tape Library backup job:tr:Error code: 0x0000045d--tr:TapeFileWriteStream failed to write 2097152 bytesCannot append file block to the end of file. File: [\\.\Tape0, pos: 3, blockOffset: 1024, size: 27401388032]. Write position: [1260388352].[15.06.2023 15:50:46] <35> Error          --tr:Unable to asynchronously write data block. Block identity: [Data block. Start offset: [1260388352], Length: [2097152], Area ID: [601].].[15.06.2023 15:50:46] <35> Error          --tr:Processing of asynchronous write requests has failed. Output file: [\\.\Tape0, pos: 3, blockOffset: 1024, size: 27401388032]. 

Hello guys,A quick question about the upgrade process for a periodic backup copy job.I have a backup copy job to a NAS repository with Per-Vm option set. To upgrade the chain I have to create a new job and map the backup, during mapping Veeam will synthesize full backup from the current backup and build a per-vm chains for every object.In the case where the repository it’s not a ReFS/XFS partition, Veeam will recreate a Full Backup and I must have enough space on the disk partition right?

For a hardware server (no vmware) I use the Agent for Windows and backup to a local NAS. I added a cloud backup job to Wasabi which works but I noticed it disabled the schedule to the local NAS. I turned it back on and made sure the times do not overlap. Is that the only way to have a local and cloud copy with the Agent, two separate jobs? I like local for speed when restoring, cloud is only in case of disaster...

We are looking to install Enterprise Manager and was wondering where the best place was to install it.  We have one VBR server with less than 100 instances to backup.  I have a Server setup for Orchestrator, can I put it on the same Server, or should I stand up a new separate one?

Hi,is it possible to use immutable repository like this repository from local disks RAID-5 on a physical windows 2019 server that have Veeam V12 installedand a Linux ubuntu 22.04 64bit on as virtual machine. thanks

i would like to know that, can we make multiple veeam servers with one backup repository only.scenario :I have 3 data centers with installed veeam server on each site and i want to backup all of my workload such as VM and physical server in data centers to DR directly without putting any backup repository on data centers