Discussion Boards

Hi There, I deployed Oracle Plugin for Linux to use Oracle RMAN database backup but during the wizard in repository section it didn’t list all repos that I’ve got it only show the default veeam repo but the SMB share repo not shown in the list ! Did I miss something here in the configuration? Coz I want the backup to be stored in SMB share repo not the in the disk of the veeam server. Thank you

Hi,backup server is running 2x10Gbps NICs and it is in VLAN with Netapp iSCSI AFF device. I have also 1Gbps network card for management purpose.  Also these two network cards are in trunk so they are doing 20Gbps now (at least I think they are doing it :-) )Integration between Netapp and Veeam is configured using management ports of the Netapp which is in different VLAN reachable by this 1Gb NIC from backup server. So, I can see snapshots on Netapp but backup is being done slow (probably using 1Gb NIC). How to force Veeam to use these 10Gbps NICs instead of 1Gbps NIC? Is there a KB for this integration to read how to setup this?Thank you.

We are currently trying to set up the notifications for Veeam Backup for Microsoft Azure, for this we have created a shared mailboxModern Authentication: is set upStatus: AuthorizedWe receive the message: Failed to send a test email: The mailbox is either inactive, soft-deleted, or is hosted on-premise

Hello! I’m using Veeam Agent for Windows 6.0.2.1090 (free edition) for my backups. I have it set to hibernate my PC after the backup is completed. However, I find that even though the wake + backup + hibernation is successful, the next time I wake the PC after a backup, shortly afterwards, it hibernates without me doing anything. It happens even if I leave the PC on the login screen. I’m on Windows 11 Home 22H2 and see Event ID 187 in the system logs when this happens: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">- <System>  <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331c3b3a-2005-44c2-ac5e-77220c37d6b4}" />   <EventID>187</EventID>   <Version>0</Version>   <Level>4</Level>   <Task>243</Task>   <Opcode>0</Opcode>   <Keywords>0x8000400000000404</Keywords>   <TimeCreated SystemTime="2023-12-16T19:31:19.2224598Z" />   <EventRecordID>6270</EventRecord

I am trying to upgrade Veeam B&R Community Edition from v10 to v12.1 on a Windows Server 2012 R2 physical server. During the upgrade process System Configuration Check the result shows that Microsoft Powershell v5.1 requires a reboot, and the installation process will continue after reboot. After I reboot the installation process begins again from the beginning, resulting in the same message. So this has created a loop. I manually installed Powershell 7.1 but it appears the OS considers this a separate version from the original Powershell 4 version. So it doesn’t appear that the B&R installer realizes PS 7.1 is installed. How do I get around this installation loop? I have tried uninstalling B&R and starting from scratch, but the same issue appears. TIA

Backing up the OS on a W10 Pro system, to USB RDX cartridge. Backs up the C drive, WinRETools, then hangs backing up a 10.9GB restore partition at 10.8. Been going for over an hour and a half this try. Tried letting it go overnight and it stopped with a red x. Also tried backing up just a 10GB Folder and it completed and then said there was no restore point when I tried to “mount” the backup to restore a file. These were just test runs, will probably just wait and try again when there is another version. Not sure if anyone else had seen such.  

I have a situation to change the Veeam secondary old repository to Linux Hardened repository, Below are the details; I have installed RHEL in DR Server I need some guidelines in Scrips to configure the Linux Hardened Repository (RHEL 9.2)Moving the backup from old repository to new one without any impact

Hi All,required your help on this issue.We are trying to add a RHEL 8 installation (physical machine) as Linux hardened repository.It fails with error - Veeam transport installation fails on Linux repository. There no ports block or firewall blockingWe are working per article https://www.veeam.com/kb4250, but any other leads  .  

Hello to all,It’s me again with the new topic. 😁I have question about Retention Policy.How the chain is going to be deleted?As I try to figure out it should be when the file is created and from that day it will be available before the retention policy in my case “14” days is over.On the 15th day it will be erased or?This is my current settings: I have active full backups on the first Friday.We are doing full backups on Friday and the rest is incremental.Can someone give me more information on retention policy and also on the Synthetic full backups periodically.Thank’s to all the forum users.Probably the best forum in my opinion.  

Dear All,Our Veeam backup version is 12.0.0.1420 P23230718 and Veeam Agent version is 6.0.2. we want to  veeam bare metal recovery but see the error “Saving restore logs Error: Error in the application”, please advise and thank you 

How to retain VMs brought up using VDRO longer than 7 days?In order for us to retain the VMs past 7 days, we decided to basically stop Veeam services on our VDRO server. Needless to say, our VDRO is inoperable at this state. We’d like to bring it up and not affect the VMs that were created. So I think, this means that we need to modify entries in the VDRO database to “cleanly” remove this from VDRO but un-touch on the vSphere side. We can rename the objects in vSphere but not sure if this would work since VDRO may be using object IDs in its DB instead of object name.  The VM involves is a big DB and just running a DB check took about a week and after this a patch needs to be applied necessitating another check that is why we need it longer than 7 days.  Thanks for the ideas and suggestions. I have also opened a low sev ticket with support and will share what they recommend.  

Is there a way to set/adjust  the spacing on the Veeam O365 job reports?  Seems like a lot of unnecessary word wrapping going on. 

7.12.2023 11:25:49 :: XXX İşleniyor Hatası: Dosya mevcut değil. Dosya: [6-xxxxx2023-11-23T092907_9A5F.vib]. Okuma erişimi için depolama alanı açılamadı. Depolama: [6-XXXX 2023-11-23T092907_9A5F.vib]. 'XXXX-flat.vmdk' diski indirilemedi. Paylaşılan hafıza bağlantısı kapatıldı. Disk yüklenemedi. Atlanan bağımsız değişkenler: [vddkConnSpec>]; Aracı, {DataTransfer.SyncDisk} yöntemini işleyemedi.   

Hi, I recently updated vcentre and had to create a new backup task as the old one was no longer working. However, I noticed that veeam backup created many orphan files as a result of each backup and I have to go to vcentre to consolidate these backup.  The files are named as MyVM-000001-ctk.vmdk, MyVM-000001.vmdk and it goes on for a while till in my case, 000046. I also note that there was some information displayed - “MyVM has stuck VM snapshot, will attempt to consolidate periodically” I am on veeam backup and replication version 11. This was working well previously before the vcentre upgrade.  Thanks in advance.

hello,I’m a little bit confused about application aware processing on veeam, what is it for actually  ?, for example, if I have database (MS.SQL) on my source backup, do I have to enable AAP on it , so I can also backup & restore that database. or do I have to install plug-in on source backup ? Thank You

Hello, I am new to using Veeam and in my small laboratory I am testing rotating disks :I have a retention policy of 21 and I have 3 disks (one per week) : If I understand correctly it would be 7 per disk The question is: if I use Forever Forward Incremental when the disk already has 7 points and I connect it again, will it merge the old incremental and save only full backup? Thanks

Hello Community,as part of a hardware refresh project project for a new customer, we are planning on creating a separate /24 VLAN subnet behind the firewall in order to better segment and protect the Production vSphere environment, the new soon to come vSphere DR cluster as well as the Veeam backup fabric as they currently reside in the same flat VLAN and IP subnet where all clients and servers reside (as depicted below):====================================================================================================Currently the Veeam Backup server/primary backup repository is a physical Windows server running Windows Server 2019 with 50TB of local storage. We are planning on moving the Veeam Backup Server to a new dedicated VM hosted on the soon to come vSphere DR cluster and, at the same time, repurpose the primary backup repository hardware into a Veeam Hardened Repository.The main concern here are the 60 or so client computers with the Veeam Agent for Windows. More specifically

We have a job configured in Veeam Plug-in for Rman, version 12, and retention is not working. With this Plugin, we configure everything from the Veeam console, I attach images. The retention is 7 days, the repository is a disk (not tape), a level 0 backup runs on Tuesdays and differential every day. The jobs finish fine, without alerts, but on the seventh day nothing is deleted. Question: do I have to configure something else in Rman? We did not find any more Rman options when configuring the Plugin from the Veeam console. Thank you 

Estou enfrentando este erro na execução de um backup via Applications Plug-ins.A mensagem apresentada pela console do veeam traz a seguinte informação:21/12/2023 19:35:22 :: hdbsql error: * 2: general error: Setting changes failed on remote side. SQLSTATE: HY000   No log Error        Database backup has failed due to plug-in error Error        hdbsql error: * 2: general error: Setting changes failed on remote side. SQLSTATE: HY000 (Veeam.Backup.Core.PluginManagement.CEpPluginClientProtocol+CPluginClientException) As credenciais e permissões do usuário estão corretas, oque pode ser de diferente? 

I have an issue while doing backup database SAP hana using veeam 12. Plug-in managed by veeam console.    hdbsql error: * 258: insufficient privilege: detailed info for this error can be found with guid '052eb08c6d5a6d4fa48cd1a663f49699' sqlstate: hy000

Hi,I have one task and need the following purposes:Daily Incremential Backup and keep only 7 restore points. Create the full backup every fourth of the week and keep 3 restore pointsCan I do that? And how can I do?I am using veeam backup and replicate 12.

I’m migrating my Veeam install to new brand new VM. The original Veeam server is Windows 2019 running Veeam B & R & Veeam ONE. The original install was v11 that was upgraded to v12, currently using MSSQL.The new instance Windows 2022 running a fresh install of only Veeam B & R using Postgres.I’m going through the steps in the Veeam B&R Configuration Restore Wizard when I run into the this error:SSPI authentication failed for user “HOSTNAME\Administrator” I’m using Windows authentication for the Postgres credentials. Has anyone run into a solution for this error?

Hello everyone!Thanks in advance , I have similar error about four weeks for this VM  now. most of the time  of the time backup jobs  are showing this error for several backup jobs. the error is this one:6/11/2023 11:47:56 PM :: Failed to create VM recovery checkpoint (mode: Veeam application-aware processing) Details: Failed to create VM (ID: df0ee189-6536-44d4-9bab-347e770cffca) recovery checkpoint. Job failed (''). Error code: '32768'.  6/09/2023 11:47:56 PM Failed to create VM recovery checkpoint (mode: Veeam application-aware processing) Details: Failed to create VM (ID: df0ee189-6536-44d4-9bab-347e770cffca) recovery checkpoint. Job failed (''). Error code: '32768'.Retrying snapshot creation attempt (Failed to create production checkpoint.)Queued for processing at 09.06.2023 23:49:07Task has been rescheduledbut on 06/10/2023 it show other backup job error: below>>>>>>>>>>>>>>>»Failed to pre-process the job Error: Failed to call RPC func

We been instructed to change our environment from a tape library system to a ejectable tape.  We can fit a set of our most critical data on a single LTO-8 tape, and have it changed daily by our Colo. The tape library will be maintained for the “nice to have” data.The basic goal is to be able to restore critical data with nothing remaining of the VEEAM install but a tape and a printed copy of the encryption password. To table top this:  We would like to have a single daily tape that has all of our incremental and synthetic fulls written to it.  There is plenty of room for this as the existing repo has only 6.4TB used in it.  The whole repo directory simple needs moved to tape daily when the job is complete.  Q1:  Is the basic goal here achievable?Q2: What type of tape job can ensure that both the increments and the synthetic fulls make it onto every days tapes? TIA