Discussion Boards

One of our customers is currently using VBR 12.1. Customer is replication some VMs form Primary site to Secondary site. Customer is planning to run a script for installing some package during the replication job is running. When the VMs failback to secondary to primary customer wants run again script for uninstall the package.Is it possible to run this script during failback? If not possible what can we do in this case?Any idea?Thanks is advamce

hi all,a crwod strike update causes a BSOD loop of Windows systems.CrowdStrike update causing blue screen error for systems running Microsoft Windows: report (local12.com) Boot Windows into Safe Mode or the Windows Recovery Environment     Navigate to the C:\Windows\System32\drivers\CrowdStrike directory     Locate the file matching “C-00000291*.sys”, and delete it.    Boot the host normally. 

My Veeam is set to wake, backup, and sleep at around 4am. When I later wake my computer during the day a pop up comes up saying “Veeam completed backup and will sleep in:” and then a 60 second timer before it autosleeps. I assume this is the same timer that is used at 4am to autosleep my computer, but for some reason that dialog stays active after sleep and I need to cancel it. I will try to get a screenshot the next time it comes up tomorrow.

Hi there, we run a relatively small Backup Environment with Veeam Backup & Replication 12. I have several File Backup Jobs of unstructured Data from our Server. The Jobs use a local NAS as Onsite Repository, a Remote NAS as Offsite Repository (secondary Target) and a local StoreOnce VSA as an Archive Repository. It works as it should. But i cannot get my head around how i can access the contents of this very Archive, that is created alongside the File Backup Job. Is there a way to access this Archive directly? There’s also no Backup Mapping available on that Page. What happens if i loose access to that Archive; say - Veeam Backup System dies and i have to reassign everything in a fresh install again. How can i get access to that Archive again? Many thanks in advance for your help.Steffen

Hello everyone! Help me to remember: On v12 shouldn't I be able to run an active full separately by VM?I right click on VM but nothing happens. Obs.: My repository is setup per machine backup files.

Hi folks, I need to understand a little bit about NAS backup using NDMP protocol. I have read this article https://www.veeam.com/blog/nas-data-protection-best-practices.html written by Matt Crape. In particular I want discuss about third modelThree-way model: In this model, backup data flows from NAS to the backup server, which then sends that data to the backup device. This model requires three-way communication between NAS, the backup server and the backup device. Some advantages of this model are that it allows for better control over the backup process and greater scalability. However, this option may also introduce additional load on your network.If I understood VBR Server manage backup, after connecting with NAS, and write on a primary repository.  HAve you experience in this model backup? 

Hi, I am testing with Veeam to find out if it suits our needs. My first backup job though already fails under the rescan. Running the guest credentials test gives me this error in the log:‘RPC client failed to call method [GetSvcVersion]’.I like to backup a Windows 11 VirtualBox VM. The Windows firewall is switched off on that machine. VirtualBox and Veeam B&R are running on the same machine. The VM is connected via bridged networking.The RPC services are running on the VM and the Veeam installer service on the Veeam B&R machine.Thanks for any help or hints. 

This has got to be one of my most longstanding favorite features from VEEAM!! I’ve had so many customers over the years that have small to mid-sized environments and no dev lab! They have complicated applications or scenarios that need testing and before this they were literally testing in production. VEEAM FTW with making this possible with vPower technology to mount the image to an ESXi host directly from a backup file!! 😁 If you’ve not done this, go check it out! It’s the same as configuring the SureBackup job, but keeping the VMs running by selecting the checkbox in the screenshot below allows you to remote into them once they’re all up and running. Make sure that checkbox is checked to keep the SureBackup job runningFrom there, do your testing and see the results!My earliest

BTW, another opportunity to get certified by completing a course on or before August 30th. You can read more here: https://next.nutanix.com/education-blog-153/nutanix-university-boost-is-back-free-cert-exam-when-you-train-by-august-30-43221

I’m experiencing an identical issue to this post on the latest version of Veeam B&R and Veeam Agent for Windows.  I’m creating a new post to learn if there is another option besides simply disabling the CBT driver.Veeam B&R Version: 12.1.2.172Veeam Agent for Windows Version: 6.1.2.134Windows Version: Windows 10 Pro 22H2 19045.4713Problematic Device: Amazon Kindle Paperwhite 5Error: SYSTEM THREAD EXCEPTION NOT HANDLEDFailed: VeeamVolumeCT.sysIn contrast to the original post, I cannot bypass this issue by leaving the device connected during boot.  Windows immediately returns the BSOD - or GSOD in my case - and experiences a boot loop.Uninstalling the CBT driver from Veeam B&R removes the issue but the implications of this solution are less than ideal as the Veeam CBT drive

This is a reproducible BSOD caused by a veeam software driverI know this is strange, but, so far, this happens on two machines in my home lab.1. windows 11 laptop - running VAgent - 6.0.2.10902. windows server 2022 - running VBR - 12.0.0.1420 P20230718Every time I plugged in my Kindle into the USB port, Windows does a BSODTo be honest, I am very dependent on my Kindle. My old model died, just got the new one and every time I plug it in, my machine hard crashes with BSOD, on every machine I have at home.What does the .sys file do, Is there a way to disable that .sys driver, is there a temporary workaround, anything?Please Help, David 

I have an install of Enterprise Manager that is still referencing an old vcenter server that does not exist any longer.  Of course, I can’t just right click it and remove it, since it doesn’t exist anymore, so I was wondering what procedure I can follow to remove this stale vcenter server from my Enterprise Manager. Thank you

Hi:During some time, a Solaris agent backup worked well, but some day ago failed with the error "Incorrect zpool state value: SUSPENDED"The first day with the error was July 17, but on July 15 the same backup worked OK.Also, we reviewed zpool that the job use in Solaris ([/RMAN_FULL_DIARIO_PACSELD] is a ZFS file system. Associated with zpool [RMAN_FULL_DIARIO_PACSELD].), but the state of this zpool is ONLINEThe only detail in this Solaris server is that exist ANOTHER zpool that WE NOT USE IN THE BACKUP with SUSPENDED state.Support case: 07347488 Any idea? Regards

One option to have encrypted date in the capacity tier is to enable capacity tier encryption.Encryption for Capacity Tier - User Guide for VMware vSphere (veeam.com)Question is: who exactly does this encryption?I always assumed the gateway server is used for offloading. But helpcenter isn’t specific here. Elsewhere helpcenter states that the encryption will be done “at source” - which in that case would be the repo extent server of the performance tier.Who can provide evidence here? Thanks,Michael 

i I am a noob trying to learn this software for now just to make some very basic backups of my C Drive on my home computer. I installed the software, created a new repository on a local drive Started a new job : volume type Under computers I clicked add and added hostname of my computer as an individual computer - using my local windows user name and password for credentials (this user is the admin on my local machine) Set Up backups to a local disk on my computer When it attempts to run I get "Unable to process [computername] - host rescan is required When it tried to scan I get:Failed Unable to install backup agent: failed to connect to [computer name] Error: Access is denied. Failed to connect to share '\\[ipredacted]\ADMIN$'.I saw that in windows run I am able to open that '\\[ipredacted]\ADMIN$'. - and the folder pops up.I tried disablin

How to solve the problem of deleting an encrypted repository and receiving a prompt that the SQL database is unavailable?When deleting, prompt that there is a backup record in; But this shouldn't affect it

[Problem]: Recently, a new Linux encrypted repository server has been added, which comes with two 50T partitions. Tape is directly connected to the Linux encrypted repository server; Afterwards, I added encrypted repository resources on the VBR host; Then I tried to add the tape again, but it showed an error message. Specifically。Linux encrypted repository with two IP addresses。as follows：   1、2024/7/12 9:35:59 Error    Discovering installed packages Error: Package [VeeamTapeProxy] is not allowed in 'restricted mode'  Failed to invoke rpc command 。  2、2024/7/12 9:35:59 Error    Failed to save tape server: Package [VeeamTapeProxy] is not allowed in 'restricted mode'Failed to invoke rpc command。  3、2024/7/12 9:35:59 Error    Infrastructure item save failed Error: Package [VeeamTapeProxy] is not allowed in 'restricted mode' Failed to invoke rpc command。                           

I am working on a backup and recovery design for a customer who have an Active-Active data centers and VMs are replicated both ways. For e.g. Few VMs replicated from DC1 --> DC2 and some from DC2 → DC1.Customer has a physical server in each DC for backup storage. My initial design was to deploy the Backup server and backup repo to be installed on the same physical host in each DC. Have Backup and CDP proxies configured as VMs on the VMware clusters to replicate and backup VMs. However, while discussing the same with the Veeam services architect, his recommendation was to deploy only a single Veeam backup server and have a backup repo in each DC. Replicate the Veeam backup server to DC2. In case DC1 is lost, recover the Backup server VM on Dc2 and then restore or recover other VMs. What are your suggestions? Which option is better? Is there another option? Thanks,Sudhir 

Hi,Anybody aware of a migration path to shift from a DataDomain without immutability to Immutable MTrees on the same box ? I guess the only way is to create a new repo and chain… and make some good calculations on free space to keep it in the same box.

Hi All,I tried to build cpd lab, and while I install cdp i/o get  error about viburl certificate not trust, event if I install it manaual.I'v setup dns and /etc/hosts to resolv.Anyone can give some recommend?esxi 7 and 8 , veeam 12 

Hello All,I have a VM on standalone Hyper-v 2019 with a backup checkpoint that I can not delete.The checkpoint was created by veeam during backup.There is no opting in the GUI to manually delete the checkpoint.I ran the backup again and it was succesfull however it did not delete the checkpoint.What can I do? the checkpoint is growing quite rapidlly.Version: Veeam Backup 10a Build: 10.0.1.4854 P20201202 

We are using Huawei storage for our VMware backup, but we noticed that Huawei storage is not supported any more: https://helpcenter.veeam.com/docs/backup/vsphere/upgrade_vbr_byb.html?zoom_highlight=huawei&ver=120If we upgrage to V12, is there a way to backup our production vms built on Huawei storage with Snapshot ?

I wanted to create this in the hopes that in the future, someone who is experiencing this error will find this thread and see a solution. I randomly had a backup start throwing the below error:Failed to pre-process the job Error: One or more errors occurred.  Unable to apply retention policy: failed to delete backup files Error: Full storage not foundThrough some Google searching, all I could really find was to run an Active Full and start a new backup chain. I tried this, but the error still persisted. At this point, I did the only other thing I knew to do, so I told Veeam to delete the restore points for that job from disk, and I then ran a new active full. I essentially started over with a fresh dataset. I was able to get a successful backup after this.In conclusion: if you ever run into this issue, try running a new active full. If this does not resolve your issue, go to your restore points (the Disk section in VBR), and tell Veeam to delete from disk

I need to exclude an AIX job from a backup copy.Recently, we have upgraded to version 12.1The old backup copy has excluded the aix job, but on new backup copy job created we cannot exclude it.In the exclusions list we can see all job/objects from repository but aix job.Aix job is unmanaged and versión 4.1 Any idea to fix that? Thanks in advanced!!

There is one VM in our prod environment that I am unable to backup due to unable to quiesce the VM. I looked at the event log of the machine and found out Event ID 157 and Event ID 15 started occurring same time the backup started failing. Looks like there are phantom disks seen by the OS. Device Manager shows 2 drives and this is correct. I have storage migrated the VM but the error keeps on occurring meaning it is with the VM itself. System scan (sfc) not showing any error.  What are your thoughts on this?