Discussion Boards

I have this Quantum LTO 9 HH rack mounted tape drive connected to an ATTO 12GB SAS HBA on a windows 2019 server. I see the ATTO card in device manager but I do not see the tape drive there. I dont see any lights on the ATTO card or on the SAS port on the tape drive.  Wondering if anyone could help me to get the tape drive seen by the system. Once I install Veeam (tomorrow) will Veeam install a driver for the tape drive or is there another issue here? Thanks!

Hi everyone,When we enable encryption in the proxy's transport mode, the ESXi host will actually perform the encryption before sending to the proxy. I'd like to know if there's a formula to determine how much CPU we should allocate to the host. Does anyone have this information?  

HI folks,We are increasingly deploying Hyper-V environments following recent changes in VMware’s pricing model. In my designs, I typically separate production and backup infrastructures into dedicated VLANs.However, when using an on-host configuration, applying this architecture means that traffic will inevitably pass through the firewall, which could lead to excessive load and negatively impact backup performance.The most straightforward approach today is to implement both Veeam and Hyper-V components within the same subnet to avoid any routing.  How are you currently handling this in your environment?

I'm having an issue I don't know how to resolve. Before I contact support I thought I'd throw it up here after searching for solutions. Topology: Veeam server on a hypervisor VM with 2 virtual NIC (one for the main computer network w/ dhcp and one isolated backup subnet with no dhcp).The isolated subnet ports all exist on the same L2 managed switch. The veeam server can ping and ssh into the hard repo. Hard repo is Ubuntu server 22.04 LTS  connected to the backup subnet. On both systems, the backup subnet only has a static IP (no DNS or gateway). Issue: I can successfully add the hard server. I can create the repo. Any backup jobs fail because it can't connect on port 2500. I pulled the hard repo out of the isolated subnet and into my main computer data subnet with DHCP. I was able to successfully add the hard server and perform a backup without changing anything. Question: Is there a specific reason I can't get this working in the isolated subnet? I run a NAS in this same fashion and

Hi teamMay I have your thoughts?I would like to decide on what is most effective.In the existing environment, AHV VM are backed up with VM based backup.But the Nutanix cluster also has existing protection domains for off-site replication.The new cluster will still have protection domains so I am wondering if I should back these up instead going forward and not do a VM based one. I believe this will be more effectiveCheers

Hi teamThis is my first attempt at this and seeing some issues.I am deploying an AHV cluster. I am doing the proxy\backup appliance install as part of this process.I point to the name of Prism Element cluster, not Prism CentralI get a warning that says failed to register Nutanix AHV Cluster: Failed to refresh entities.The process completes, cluster appears and I can open the Nutanix console from the VBR console.I verify that the specified account worksThe proxy appears as unavailable. I open the Veeam backup for Nutanix AHV console.This logs in with same account as specified.Under Administration > Infrastructure the cluster shows its state as unavailable. But it allows me to open the cluster console from here.When I rescan the proxy I do not get any errors.When I rescan the AHV cluster, I see the followingFailed to scan VMs: Unknow Socket ErrorFailed to scan PDs: Unknown socket ErrorFailed to scan Volume Groups: Unknown socket ErrorFailed to scan Protection Domains: Unknown socket E

I was asked this week what some of the prompts we are seeing in the field for Veeam Intelligence are. Many people, including myself, have demonstrated asking how-to questions and responding in their native languages.So I wanted to put out there…What questions have you asked Veeam Intelligence on premises and in Veeam Data Cloud? Let me know what you asked and what kind of response you received. You might make it in my next blog post 😉

Veeam Vs 12.3.I made an Surbackub Job with an Applicationgroup and:1 DC in authoriative mode1 Exchange Server 2019 Cu 14No Internet Acces, No Proxy. Hyper V. the VMs are running but Windows Firewall Service is DISABLED. I read about it, that Winodws FW make this because Veeam use isolated network. However how can I test serious with such environment? I tried with PSH and Registry Keys to enable WFH Services to autmatic and yes  it changes, but when I wann start Service it comes error “no Device” Set-NetFirewallProfile -Profile Domain,Public,Private -Enabled TrueAND Reg Key I wanna test Exchange CU 15 (SE) and prereq check fails beucase no control to FW serives (mpsvc or similair error). SureBackup is useless if this not working. Thanks for any advices! 

I have asked this before, but I’ll ask again: I need to write a report about tapes that currently in my library that are FULL. This command, unfortunately, is monumentally slow:$TapesToBeEjected = Get-VBRTapeMedium -Library $LibraryName | Where {{$_.IsFull -eq $TRUE}} | Select Name, LastWriteTime, MediaPoolID, IsFull, Location | Sort -Property MediaPoolID, NameSo rather than querying the all the tapes that Veeam has ever used (I have over 1300), I figure it will be faster to just query the library for the tapes *currently* in the slots and drives (that will be about 80). Then I can do the $_.IsFull on just those.But I am not seeing a command that seems to do that. Is there one, that queries the library and returns tapes in slots and drives?Otherwise I would have to loop though Get-VBRTapeMedium -Library $LibraryName , select only $_.Location = Slot or Drive, and then re-select for $_.IsFull.And I don't think that would be materially faster.Is there a better way to get the info I need?

This is not a "little" upgrade but with a  list of Security Vulnerabilities solved. So, check the article and patch your backup environment. https://www.veeam.com/kb4738

Dear Community, What could be the issue? While upgrading Veeam Software to the latest Version 13  All Services , All jobs, and everything are stopped.    

Hi VC,Happy new year first of all!I’m currently backing up a SQL VM via the Veeam SQL Plugin to a datastore within my production environment, at the same time I’m replicating said VM via CDP to my DR site.I’ve currently setup the following schedule via the Veeam SQL Plugin:15 minute transaction / log backupDaily differential backup @ 18:30 (except Sunday)Weekly full backup (Sunday) @ 18:30The differential backups are failing when the CDP is enabled; the CDP runs 24-hours a day as we need near-zero dataloss.Any ideas how I can have these two running at the same time without the errors above?Many thanks,LGH

So turns out using Deployment Kit is the easiest way to be able to perform FLR to Windows from a Vsphere backup.Deployment kit by default contains a certificate of validity 1 month. Does the agent (transport service etc.) stop working after that? How do we manage those certs as we generally do not do many agent-based backups but want to be able to do FLR to original destination nevertheless.Thanks!

Version: 12.3.2.Problem: a copy job to a rotation drive (HDD) is running since 3 days. I stopped job and confirmed with yes, but since hours status in dashboard running jobs is “stopping”. I can disable job but not delete. What I did: restart B&R services, reopen console. Restarted whole backup server. no success. Thanks for any advices. 

Turns out that VCSP licensing for Entra for a tenant which is a multi tenant organization can become very expensive very fast… Here’s the situation, a holding with 70 employees. (nice Microsoft E5 licenses) there is a central IT and HR department that shares information to their subisidaries which are connected in multi tenant organization structure to see availability, better collaboration in Teams,…. Now we ran our initial Entra ID backup and it consumes 1200 points, where I assumed that only the real physical users with the E5 were going to eat a license. All those users fron the external tenants are of the type ‘membe’ in Entra, so this is used to calculate the number of licenses. It becomes even more expensive I think since we need for compiancy reasons also an Entra ID backup from all the subsidary tenants… Anybody any toughts on this ? I don’t see any option to soley backup the member users for which their tenant is their primary main tenant. 

Veeam Backup and Replication v12.3.2 (Free)VMWare ESXi 8.0 (Free) Hello Community! I’m hoping someone here can help me.I have successfully  backed up a physical Windows server using Veeam agent. Created a recovery media to use for restore into a VM. I have created the VM with similar CPU/RAM/Disk as the physical server. Powered on VM and booted it using the recovery media. During the restoration, the process fails with these error messages (see below). I tried looking for the logs in C:\ProgramData\Veeam\Backup but there were so many in there so I couldn’t which one to look for. If anyone has an idea on how I can resolve this issue, please let me know. If you need logs, please tell me which one to look for.Thank you very much! Error Message 1 Error Message 2 

Anyone can help me to resolve this issue.   

Hi everyone,I’m studying the v13.0.1 training course in order to delivery its next year, during reading the course material, I found the information that not all functionalities are available on VBR Windows still available on VSA, I’m trying to find a list of those unavailable functionalities, but so far, I couldn’t get a list of them, does anyone know what functionalities are not available on VSA v13?

What’s the root password on the VSA?

When we enable MFA, then all users is forced to use MFA. In case we need do execute script by powershell, how we can exclude so the powershell script still can operate normally?

Good afternoon everyone,I'm using the latest version, 13, but after restarting my server, I can no longer connect to the console. It shows an SSL error, "see inner exception," but I haven't been able to find them to get more information. Could you please help me?  

We’re setting up the Veeam Software Appliance (VSA). We got an error when we tried to connect to our storage device, "Failed to get certificate from: https://xxx.xxxxxx.xxx:5392." technical support has advised us to “ensure that the cipher suite 'TLS_RSA_WITH_AES_256_CBC_SHA256' is enabled on the Veeam appliance.”The command “openssl version -d” returns “OPENSSLDIR: "/etc/pki/tls".” When I try to edit openssl.conf in that folder, I get an error, “E45: 'readonly' option is set”. How can I enable the cipher?Thanks for reading.

Hi Community, During Veeam Agent backup, you may see: Collecting recovery media files. Details: Windows recovery image file not found This means Windows Recovery Environment (WinRE) is missing or disabled. Solution: Work for me this morning.Run on target VM. reagentc /setreimage /path C:\Windows\System32\Recovery; reagentc /enable!--scriptorendfragment-->!--scriptorstartfragment--> Note: If WinRE files or the recovery partition are missing, you can ignore this warning backup is valid.(See diagram below for quick steps.)