Community

Hi guys, i know that in v11 is not recommended use the dedup repo as primary backup storage, is there any news in v12 ? The customer wanna buy 2 x Quantum DXI dedup hw appliance (each site one dedup appliance) and i3 scalar tape library. From my point of view, the best pracices is - backup to ntfs/refs/xfs repo as primary backup and after create a 2 backup copy jobs to each dxi appliance and after create a tape backup job. BUT.The customer wants a send the primary backups to DXi and after to tape. its possible or its bad plan ? Thx.Tom. 

AWS CLI ProfilesIn my previous articles I used the AWS CLI to interact with the object storage platforms for demonstration purposes.  This article will focus on a very powerful feature of the AWS CLI, the usage of profiles.If you find yourself often interacting with several object storage platforms and/or use multiple object storage accounts, then using profiles for the AWS CLI will simplify your efforts.  It has for me. Creating the first profileFor an example, let’s say you need to access three object storage platforms regularly.  For the remainder of this article, the storage platforms will be:platform1 platform2 platform3You could use the “aws configure" command to reset your environment to use the credentials and region every time you switch to another object storage target.My first step is to see what AWS cli profiles I have configured and set:Let’s see what profile

Hello to all,I have backup chains stored on XFS volumes with reflink that were created with FastCLONE.How can I move these strings to another volume while preserving this? Thanks

Hi, We have a Dell Power Protect appliance with 7.5TB of space, when I check the used space on the Veeam console, I found that it's only shows me the pre-compression value as used space (8 Tb). The console also shows me the free value (7 Tb) and I think it's correct after data compression. So I still have other servers to add on veeam with 5TB of data and I want to know if our Dell Power Protect will support this extra space or not. Thank you.  

Greetings. I have an on-prem Windows Server 2019 Datacenter with the Hyper-V Role enabled running about 10 VMs. I was applying an update to one of the VMs, a Windows Server 2016 running Exchange 2016. The update, CU23, failed, forcing me to restore the machine. Prior to the attempted update I had VeeamZipped it from the B&R 11A CE panel, and so I  launched the restore from there. After restoration I had quite a bit of troubleshooting to do to get mail flow back but I was completely successful.The remaining issue is this: Upon VM startup, there is a long pause, 3 full minutes, during which I see the expected black screen with “Hyper-V” logo smack in the middle, but it sits there doing absolutely nothing I can see. No circle of dots, just the Hyper-V text. After 3 minutes the circling dots begin and I have desktop in about 30 seconds. and everything runs normally. The disk layout is the usual Recovery, EFI and OS partitions.Has anyone run into anything similar? Thank

Good day all, hoping to find someone who has either seen this or may know where I could start to troubleshoot (I'll open a ticket with support as well, just hedging my bets here). We've used Veeam for server/VM backups for a few years and it's awesome.For workstation backups, we've used Carbonite (don't ask, we've tried to get rid of it in the past but got shot down by higher ups/non administrators) but it has been decided that we're not going to renew this year (got about a month left on our annual term).Over the last year, I implemented OneDrive KFM so that our desktop and documents folders are resilient and more "portable", which has made our hardware swaps much smoother and reduced the need for Carbonite.But I digress...while nobody actually said to go find a replacement for Carbonite (it seems to be the thought that OneDrive KFM is a replacement for backups,

[CmdletBinding()]param ( # CSv file tab delimited with name and Vlan [Parameter(Mandatory = $true)] [string[]] $CSV, # The datacenter where you want to move the workload to. [Parameter(Mandatory = $true)] [string] $Datacenter, # The Cluster where you want to move the workload to. [Parameter(Mandatory = $true)] [string] $Cluster, # Errorlog [Parameter()] [string] $ErrorLog = 'E:\Scripts\ErrorLog.txt', # Enable error logging [Parameter()] [switch] $LogErrors, # Enable error logging [Parameter()] [Int32] $HostIndex = 0)#$Global:ErrorLog = 'E:\Scripts\ErrorLog.txt'function Write-ToLog { [cmdletbinding()] Param ( [string] [parameter(ValueFromPipeline)]

Hi Everyone, I just found this. It seems to have been around since June but I missed it. If any of you are trying to up the anti on your Github skills take a peak! To think I shelled out $14 on the Udemy Black Friday sale for the Git bootcamp. Oh well more is better than less :) https://skills.github.com/ cheers  

I’m a user of Veeam B&R Community Build 11.0.1.1261, and I’ve just started experiencing a problem a second time that I thought was fixed.Some time ago (a couple of weeks to a month), I started experiencing an issue with Veeam backups. When it would try backing up, it would quickly error out with the following error:Warning    Failed to synchronize [Backup Repository] Details: Failed to call RPC function 'NfsIsExist': Failed to reset previous connection exception: Permission denied. The first time that happened, I assumed it was because I was disabling Veeam services that I thought were unnecessary. Despite re-enabling them, the error persisted. I eventually realized my installation of B&R was out of date, so I installed an updated version and that seemed to fix the issue for the time being.Fast forward to today, and I’m seeing the aforementioned error again when trying to run backups. The repository is a Synology Di

Private message 

k10toolsTried to use cephfs provisioner: rook-ceph.cephfs.csi.ceph.com by the “k10tools” command and portal. Both the result is failed to create snapshot and backup with PVC and data. May I know if there is any method to use cephfs provisioner with Kasten to backup? And, Since the PVC has to set AccessMode as ReadWriteMany, the rook-ceph.cephfs.csi.ceph.com provisioner can’t be insteaded with rook-ceph.rbd.csi.ceph.com

The restore point was created at 10/4, but the VIB file was remove from the disk already, on the resotre point portal, it still show normal status for this resotre point, so i cannot remove it.  Also try to rescan bakcup repo, it say below:added 0 unencrypted, added 0 encrypted, updated 0, removed 0, skipped 1, failed 0

Hey Veeam community. I am starting my New Year’s resolution early and posting my first video on YouTube. It’s a walkthrough of Veeam Backup for Salesforce. I’m planning to post more videos as I find it helps deepen my understanding of various Veeam solutions. I hope to document some parts of Veeam products that I found challenging or hard to implement. I welcome all comments as I know there are a bunch of people here with much more experience at this than I have. Have a great rest of 2022! Cheers! 

Hi Folks, This is a good time of year to look back and be grateful for things that we have. I think everyone will agree here that the Veeam Community Hub is a stellar success! I wanted to thank the Veeam folks, past and present who have made this place what it is. @Rick Vanover @Madi.Cristil @NikolaPejkova @Kseniya @safiya work/worked very hard to not only keep this place running but to proactively improve it. Even with such success they remain humble and approachable people.As everyone in IT knows, when things are working well people take it for granted (I had a non IT boss once who rather foolishly 😆 claimed to upper management during a meeting that “these systems just run themselves”) but we know they don’t.  In contrast, when things go badly the b

Hope you got my present everyone ?

Hi All,Anyone can help me on this issue right now i have 15 Instant VM Recovery status failed and unable to Stop.Here the screenshot for my issue.  

I select job, backup , windows computer.workstation, managed by agentsingle pc name pc.domain.localentire pcshared folder -> qnap nasWhen start job or schedule job, i can't see it in Home->Last 24 Hours why?ThanksPc i need backup : Windows 10 + agent 5.0.3.4708My management pc : Veeam Backup & Replication 11.0.1.1261 P20220302  

Hello fellow Veeamers, I’m hoping someone can provide me some guidance here. Has anyone deployed a solution using Veeam on DellPoweredge server and Dell storage appliances ? I am doing some research to replace my current Veeam setup which is all local storage at the moment running on a big serverwith loval disks. I want to stick with Dell just because we standirized on this platformall around, but I am looking for guidance on backing up local onprem datacente, and what is best approach for ramsonware protection, do I ship off a second set to azure or what about mutable backups on loval prem or cloud? Thank you

One of my roles at Veeam is to work with our Technology Alliance Partners, resellers, and customers assisting them with their object storage related questions.  Quite often I need to be able to analyze the S3 API requests that Veeam’s software sends to the object storage repository.  One of my favorite tools that I use for this analysis is S3 bucket access logging.By enabling this feature on a bucket, you will be able to capture information on all requests made to that bucket.  Requests like PUT, GET, and DELETE are all gathered and stored in a log that you specify when you enable the logging. Please Note: Not all object storage solutions support the S3 bucket access logging, so make sure that you check their documentation and/or support to verify that they support it.You can either use the interface provided by your object storage solution or you can use the AWS CLI.  In this article I will use the AWS CLI.The first step is we n

Sometimes, I hate to see the limited information offered in the GUI. This has not changed for quite some time now. Veeam should look into enhancing the way GUI displays the contents. Do you agree?

hello, I want to back up 8 PCs via gigabit to a QNAP arm with two gigabit cables in team. I have to do it in the shortest possible time 1.30h ideally.how can i schedule backups , configure proxy, ecc...?Backup volume with veeam community backup.PC Windows 10, volume 100gb .Proxy PC Windows 11 , 1 nic gigabit.

Hello community!Some customers asked for it and here is it (a little X-mas present for the community):The NAS Hash Comparer. This script launches an Instant File Share Recovery for a specified file share backup job and compares the hash value using the given parameters. More details can be found on my GitHub page: https://github.com/yetanothermightytool/powershell/blob/master/vbr/vbr-nas-hashcompare/README.mdHappy HolidaysSteve

Hi allWhat is the best practice to physically rotate backup drives.I have a remote system that I will go to once a month to change or rotate the drives. So ejecting the drive and connecting the new drive with out effecting the backup repositry.System is a physical Windows 10 Pro with Veeam Backup & Replication not VM. Thanks,