Community

Hello,We had 13 Backup Jobs that were all started in the same time period from 21:00 to 22:00.VBR server had 32 GB of RAM and 10 cores. It was a VM.All Backup Jobs were with single VM inside of it.Was this good approach or it was too much for our VBR Server to handle.We didn’t have any off-host Proxies and VBR Server and 60% of VMs were on the same Hyper-V host.It was acting then as only proxy for those jobs as I can assume.What would be the better approach on this?I’m still trying to grasp Veeam with his technologies as best I can..

I’m using Veeam Community (free) license, and I want to use swapped external hard drives as offsite backup for my locally hosted repository.  But when I try to create a pruning Backup Copy job, it keeps saying I need Backup and Replication Enterprise Plus.  The descriptions I’ve read make it sound easy, but they’re all vague about what sort of license is required.  It’s like they are conflating “community” as a forum and as a license?  I absolutely cannot upgrade to a paid license.What am I missing?

Me again with new topic 😁At the moment our VBR Server is located on the Hyper-V Host where are also the 50% of VMs that we are backing up. Without Using Off-Host proxies I can guess that all load will come to Hyper-V host which is hosting VMs and VBR also.I guess that data movers from source VM and VBR are run on the Hyper-V host itself.What would be the best practice for placement of VBR?Is it good idea then to isolate it from the VMs that we are backing up or?I can host it on some Hyper-V Host which doesn’t have productive VMs or anyAlso then our off-host backup proxy should be physical machine or somewhere where we also dont have anything?

Hello Forum,I have question about few things so that I make the change as smooth as possible.The plan is to create everything from scratch because our current configuration is really awful and time for change has come.  Current Situation is like this:VBR V11 on Hyper-V VM Subscription: Enterprise Plus Instances: 20 (13 used) Inventory: 1 Hyper-V Cluster  2 Standalone Hosts Now I need to remove everything from this server and to transfer the license to the new one Questions:How to transfer the license? How to properly remove Inventory so that I don’t have problem when adding it to a new V12 VBR server? I know that few folks had problems when attempting to add the hosts to new VBR, something stuck on the old VBR etc. I will not do a configuration backup because I want every

Since upgrading to V12 VeeamBR (and having to revert to a snapshot due to critical error) I get this on every SOBR tier job. I have rescanned both the hypervs as well as the azure blob then ran tier job now but still get the same error every time  Backup file version mismatch: scale-out backup repository rescan is required.

What does Orphaned and Imported indicate next to Disk in Veeam Backup and Replication under Home tab? 

When attempting the restore I get the log into Microsoft with the device code and it connects fine, hit next and veeam errors out saying Failed to open mailbox: gives the name Mailbox does not exist. I can guarantee the mailbox does exist.

Hello. The question concerns the display of repository capacity in the Veeam user interface:In the EMC DD console, the capacity is displayed in TiB and is equal to 166.7 TiB. In the Veeam UI, after adding EMC DD as a repository, the same capacity is displayed, but with the TB label.If the size of repository is displayed in TB, then it should be approximately 182.5 TB.Is this a Veeam UI error?  

I’d like to first thank Rick Vanover, Madalina Cristil, Nikola Pejková, and everyone at Veeam for their efforts and support leading into my second Veeam 100 Summit. It’s a HUGE undertaking that requires many levels of coordination. This was my second time attending the event in person. It was an hon

Hello everyone.Am not sure if this is the write place to ask this..I forgot the encryption password i have set for my veeam backups, and i want to access the veeamBackup database to get the encrypted password and decrypt it as the online manual says. But as soon as i login to the database with sql server studio with the windows authentication settings, the Veeambackup is not accessible. The sa user is not active. This manual here ‘How to install Veeam Backup and Replication 11 Community Edition with a dedicated SQL Server | Veeam Community Resource Hub’ is exactly the same as my setup, but as soon as i get to the part there i am suppose to open the database VeeamBackup to see the tables etc, i get an error ‘The database VeeamBackup is not accessible’. Also added a s

hello,I would like to know, can we use backup copy to SOBR repository as a target ? Thank You

Hello, Thanks,My question is about Veeam catching memory errors during the backup itself.Sure, sometimes ECC can catch that.For example, Let’s say Veeam:Reads a sector from disk into memory. Whilst that sector is in memory, the memory is corrupted. Veeam writes that corrupted sector to the backup file.A Health check would not catch that.Does Veeam have a way to catch that, by re-reading the source sector again or some other mechanism?Thanks much,David   

Hi, Wanted to try and bring some of the magic of the Veeam 100 Summit to the Community Hub, as so much of Veeam’s success comes from the community! I’ll be blogging here each day bringing some highlights from the summit. Hope you enjoy it!  

Hi everyone, I bring this book, I hope you Enjoy ItThis book provides tips that help administrators maximize the performance of VMware vSphere 8.0 Update 2. Sections cover hardware selection, ESXi and virtual machines, guest operating systems, and virtual infrastructure managementDownload Here 

Hello,  I try to install Veeam Agent for Linux on my debian 11but i have two errors that involve failure of Veeam Agent for linux installation 20/09/2023 09:41:17 Failed [172.16.0.18] Failed to install veeam_6.0.0.1060_amd64.deb and blksnap_6.0.0.1060_all.deb packages: E: Impossible de trouver le paquet linux-headers-5.10.0-18-amd64 E: Impossible de trouver de paquet correspondant à l'expression rationnelle « linux-headers-5.10.0-18-amd64 » E: Impossible de trouver de paquet correspondant à l'expression rationnelle « linux-headers-5.10.0-18-amd64 » Failed to invoke rpc command  0:00:14 20/09/2023 09:41:32 Failed [172.16.0.18] Failed to install Veeam Agent for Linux: E: Impossible de trouver le paquet linux-headers-5.10.0-18-amd64 E: Impossible de trouver de paquet correspondant à l'expression rationnelle « linux-headers-5.10.0-18-amd64 » E: Impossible de trouver de paquet correspondant à l'expression rationnelle « linux-headers-5.10.0-18-amd6

Hello, I will need to migrate my Veeam Backup & Replication (v12) installation to a new server because my current server is 2012 R2 and it’s not supported anymore as you know.My new server (virtual) will be a Windows 2016 and I want to migrate my Veeam B&R install the proper way in order to avoid loosing any “block change tracking” or things like that and have my backups and replications running the same as before on the new server because I have around 25 TB of data to backup and replicate and if Veeam needs to re-read the entire volume (instead of “change blocks”) that would be 48+ hours lost! 😵 Thank you!!

So I’m am basically a day or two away from taking the time and going through and disabling the backup cache across all of my customers, it causes way too many problems. But thought I’d try asking here as a last resort since Veeam’s support seems useless as usual and my R&D forum posts aren’t getting any responses. I have had various cache related issues, especially since the ridiculously buggy V12 update, but here this past week it’s been especially bad. I have about 20 computers, that I know of right now, which are failing to upload the backup cache to the VCC server. As such these computers have not been backing up. At first I thought maybe they just needed some time to catch up or something, but it’s been over a week now and they’re not even modifying the files in the VCC repository. (Side note, yes, I did go look at the files, because it’s useful, even though Veeam says there’s no reason I should ever need to look at the files.)Seems there’s numerous

veeam agent for linux run very slow on ubuntu 22.04 ltsbackup client is running virtual on virtualbox linux hostbackup client has installed zammad and elastcsearch      Duration:           13:13:00         Processed:          12.2 GB (100%)     Processing rate:    311.6 KB/s       Read:               12.2 GB     Bottleneck:         Target           Transferred:        3.2 GB (3.9x)      Time             Action                                  Duration      16:30:05         Starting full backup to Repository_1               ↑      16:30:05         Active full is forced                              │      16:30:07         Backing up BIOS bootloader on /dev/sda  00:00:51   │      16:30:58         Backed up sda 12.2 GB at 270.6 KB/s     13:10:36   │      05:41:34 (+1)    Backing up summary.xml                  00:00:30   │      05:42:07 (+1)    Releasing snapshot                      00:00:01   ▒

Hello Team, Can anyone help, am trying to upgrade VeeamOne env from 12.0.0.2498 to VeeamONE_12.0.1.2591_20230314, am unable to upgrade as it shows license is invalid. Could you please help path to download trial license for VeeamONE_12.0.1.2591_20230314.  

for a customer I have Veeam 12 installed and as primary Repository an Ubuntu Server with the possibility to configure immutability, as secondary I have a Gen4 HPE StoreOnce with also the possibility to configure immutability, where do you advise me to make immutability backups, on the Primary or Secondary Repository or on both ? (the two Repositories are in two different locations)

Hello, Thanks,For the linux hardened repository, Windows Agent Backups (volume and file) complete successfully.However, Hyper-V fails.Windows.Server.DataCenter.Evaluation.Edition.2022.21H2VBR server - 12.0.0.1420 P20230178The backup repository is linux hardened, located over the internet, not local.Note: for this linux machine, I made sure ping from repo -> VBR work ;winkThe backup repository location is a mounted SMB share.Given the error is `Failed to make the backup file immutable: Inappropriate ioctl for device`,my small brain thinks ALL immutable backups would fail, not just Hyper-V?Please advise? Queued for processing at 11/5/2023 12:25:15 PM  Required backup infrastructure resources have been assigned  VM processing started at 11/5/2023 12:25:20 PM  VM size: 127 GB (5.4 GB used)  VM is now in the requi

As announced in VeeamON 2023, the release 12a (or 12.1) of the Veeam Data Platform is coming soon. In addition to bringing new cybersecurity features, one of the focuses is improving the ability to protect data stored in Object Storage.It is a critical demand for organizations to store data related to modern applications or any unstructured data related to the business.It will be possible to take data from object storage and store it in backup repositories of any type: block, file, object storage, or even tape.There will be flexible recoveries in restoring the entire buckets, including permissions, attributes, and tags.

I’m using VEEAM 12.0.0.1420.I’ve created a backup on a RDX drive with the option ‘This repository is backed by rotated drives’.Then i created a bootable recovery media → USB stickStarting machine from USB stick and open wizard ‘Volume Level Restore’Backup location is fine, full backupStarting progress will show the following lines:OK Loading backup filesOK Restore process started …BAD Restore failed: The requested security package does not existBAD Saving restore logs Error: Unable to save recovery logs to target repository. To do …Please advise.THX Reinhard

Hi all.reference Upgrading Veeam Service Provider Console - Veeam Service Provider Console Deployment GuideI share the procedure step by step for upgrading VSPC v6 to v7.Backup database before proceeding. Backup of the VM dedicated to the VSPC service before proceeding. Cold snapshot of the VM VSCP if there is database Download ISOCheck your versiontip: