Discussion Boards

Hello,we are just some newbies in Veeam and have following problem.The Veeam Linux Agent 12.1 is correctly installed on an Oracle Linux Machine i have tried both methods, manually and per install service from Veeam Backup and Replication Server, the installation were completed with DKMS and build step what is workig very well. If i try to make ab backup of the machine i receive errors in Serverlog as follows:creating volume snapshot;thanFailed to take snapshot;Broken Pipe;Failed to write data into pipe.the linux log:[29.01.2024 08:01:29.072] vmb | [SessionLog][processing] Creating volume snapshot.[29.01.2024 08:01:29.073] lpbcore | Polling request: [job][UpdateManagedJobXmlLog][29.01.2024 08:01:29.780] lpbcore | Polling request: [job][UpdateManagedJobXmlLog][29.01.2024 08:01:29.780] lpbcore | Created snapshot [b9e92c64-5562-479d-8e2a-625ead940a8f][29.01.2024 08:01:29.783] lpbcore | Finish oracle dbs backup[29.01.2024 08:01:36.774] lpbcore | PostgreSQL is processed.[29.01.2024 08:01:36.

HI,    A backup job failed since the windows-host been reinstalled. Here is the error message: Cannot connect to 192.168.1.11 Details: The network path was not found. The network path was not found. (ERROR_BAD_NETPATH).The default share of ADMIN$ has been set, and the port 445 is open.Shoud I clear all of the setting and data-file of the host ?What is worng?  Thanks a lot!

Hi everyone,We are currently using Veeam CDP and are very pleased with its performance. However, we would like to configure the CDP bandwidth to utilize its own VLAN instead of the LAN network. We are operating within a 10GB physical network environment.Thank you for your assistance.

I was looking in to an issue today for something and happened to look at the Veeam KB page that shows versions and updates for v12.1 - KB2680: Build Numbers and Versions of Veeam Backup & ReplicationI noticed there is a cumulative patch that released on the 17th (Wednesday) with a new build 12.1.1.56.For those that are using the Veeam Hardened Repositories this update addresses the need for the SSH to be enabled for updating.  I have run tests, and it works much better for updating.You can download it here - KB4510: Release Information for Veeam Backup & Replication 12.1 and UpdatesIt also addresses a bunch of other fixes as well like the Invalid XML when opening reports that some reported here - After upgrade to V12 and DB migration to Postgresql get error when trying to show job report | Veeam Community Resource HubNot sure if this will help with your Object backups @DrObject but might want to see as there were some changes in this area.Happy patching everyone and happy Frida

Does Veeam plan to provide an install platform for Linux-based OS, referring to the installation of the Veeam Backup and Replication Application?

Hello all,I have really small environment(manufacture) with 2x virtual server on HyperV where HPE autoloader is connected over switch. This autoloader is used as backup destination of course. After installation of Backup Server on one of the servers(this server has also other role), Veaam discovered share and automatically added as Backup Repository. This share has different purpose, not for Veaam. Because is the only repository I'm not able to remove it from Veaam. Any hint?

Hello,I have a backup job (file backup) that is stored in a repository with rotating disksWhen i try to restoring a file it tells me that it cannot find the backup What is the correct method of restoring files in a repository with rotating disks? Thanks

I have a user who is having issue logging in to the VEM Self-Service portal. We have added groups to have access and I have added myself to their group so I can test every now and then.I can login just fine as a member of the group but he keeps getting Invalid username or password error. We are sure that his credentials are good since he is able to use them on other servers and applications so it is only in Self-service portal where he is getting the error. He cleared his browser’s cache and used other browser as well to no avail.I looked at the Veeam.WebApp.log, these are the entries that I see for the userConnecting to [ServerBEM] under [current account]. Selfrestore modeFailed to create user context from authentication data. Data: [Username: domain\user,  Invalid username or password (System.Security.Authentication.InvalidCredentialException) When I login as part of their group, this is what I seeConnecting to [ServerBEM] under [domain\myself]. Selfrestore mode:Remote session opened

I am using Evaluation Enterprise License on Veeam server and actually I manually installed Veeam agent for Microsoft windows 6.1.0.349 and CBT drivers in windows 10 endpoint system. As per my understand, once installed CBT drivers, if any file level changes then incremental backup will perform. But it is not happened. So what is the use of CBT and how to work ?

Veeam Backup & Replication 12, I have already installed the Server,and I have one old Filesystem and one new Filesystem,I can add the old one to protection group, but the new one Failed.The network environment is same for both FS.And there seem like no problem when I Ping them.What can I do next to find out the problem? 

Hopefully someone with experience can help me with this. I'm struggling to understand the SOBR in combination with GFS, and if what i want is possible within Veeam.What i would like is the following:Backup job to local storage attached to backup server. Copy result to tapeThis i can manage. Now...Copy result to SOBR containing: Performance tier: local repo immutable, store recent 4 weeks Capacity tier: Azure S3 hot immutable, store recent 4 weeks (copy instant checkmark) Archive tier: Backblaze S3 immutable, store month and year backupsI'm trying to save cost here, so what i don't want is for Veeam to send the files from Azure S3 to Backblaze S3, since this will result in read and egress costs. What happens on the last week of the month? Will Veeam SOBR copy from performance tier (thus local to Backblaze (ingress)), or will it copy from capacity tier?Or should i use plain copy jobs with GFS?

Current setup.I have a regular Veeam backup job. It backs up my VMs, keeping 15 copies.I have a backup copy job, that copies the backups created above to the performance tier of my SOBR. This job has set as the retention policy: 2 restore points.It also keeps 13 weekly, 13 monthly and 5 yearly backups.  The option ’Read the entire restore point from source backup instead of synthesizing it from increments ’ is setIn my SOBR, I have the option set: to Copy backups to object storage as soon as they are created. Move the backups to object storage as soon as they age out of the operational restore window: Move backups older than 1 days.What this results in is:15 backups in the backup repository from the regular backup job. Up to 7 daily backups in the SOBR performance tier AND in the capacity tier. They get deleted as per Veeams retention-logic. But always a minimum of 2. Weekly/Monthly/Yearly backups in the capacity tier Now to my question:The regular backup keeps 15 daily, the backup cop

 HiSQL servers encountered this error What could be the reason and how should I fix the problem?

Good morning friends I'm having a problem that has never happened to me, when trying to open the program options it gives me the error in the photo. Has it ever happened to anyone?  

im trying to open veeam backup and replication console i update to latest version (12), and the program wont start it close at splash window. i had the 11 version and happnened again. i went trough a network problem in my job and some of the virtual machine get damage. i want to restore it but need help to open veeam backup and replication.

I need assistance in adding  a veeam agent   

I’m currently using Veeam B&R v12. Having a screen Refresh option would be nice rather than having to constantly hit FN F5 on my keyboard.

Hello Under hyper-v environment , I’m trying to backup VMs with an other account than the “administrator” one.  So I created a user “veeamadmin” on the domain and enroll this new user in the domain admin and administrators groups (almost the same group as the administrator account)  But I get an unknown error when testing the credential: 2023-11-07 8:10:39 AM Failed Cannot connect to VM [ca040e52-e005-4445-ba0b-16986f0f16be] over PSDirect. Guest Login: [porcs\veeamadmin].;Failed to invoke func [Connect]: Unknown error 0x80131500. Unknown error 0x80131500. Failed to execute PowerShell command: The credential is invalid.;COM error:  Code: 0x80131500;  any idea what is the problem ?

Can the Virtual server achieve System state backup? If so, is there relevant documentation and Veeam certification and actual operation? Physical server Installed Veeam Agent for Microsoft Windows, But company policy blocked the USB drive that can't use Bare metal recovery media. Can the Physical server achieve System state backup? If so, is there relevant documentation and Veeam certification and actual operation? When I used the server HDD from 2 months ago and put it on the existing server to test startup, the server name from 2 months ago can be recognized in the Veeam console, and the related file recovery can be restored without affecting it. Existing server backup job. Then shut down the server, put back the original server HDD, and restart. In the Veeam console, the backup can be successfully performed without the need to create a new Backup job.

In theory could I use Veeam bu&r to completely rebuild my datacenter environment (VMware) on new esxi hosts? I have been tasked to build 2 identical rigs with the same SSO, domain name, IPs etc on seperate vSan ready nodes. Rather than do this twice I wondered if it possible to mirror the build using Veeam. I’ve picked up the limitation with vGPU enabled desktops. Are there any more gotchas that I need to worry about??? If the new esxi hosts had the same fqdn/ip would Veeam throw a wobbly and no it’s a new target environment?  

I’ve had a problem with a Windows 10 workstation waking up from S3 sleep every few minutes all night long.I tracked the problem to Veeam-created waketimers, created repeatedly by the Veeam.Archiver.Service and the Veeam.Archiver.Proxy.Service.  Stopping those services stops the waketimers, and the system returns to normal sane behaviour.  These services run under Veeam Backup for Microsoft 365 and Veeam Backup Proxy for Microsoft 365. Even when I have scheduled backups turned off at the server console, this keeps happening.  Note, I do WANT the system to wake for backups -- once a night, every night. But that's all.So it appears those services are creating those timers, but I see no Veeam-supported way to stop it or make them behave sanely.  Stopping backups at the console does not seem to affect these timers.Now, I did install Veeam Agent for Windows 6.0.2.1090 -- Workstation Edition as well as backup for Microsoft 365 on that workstation, using a local swapped hard drive, before inst

Im trying to do a file level recovery on an agent client and because the VBR server is so busy my console is timing out before i can get to the screen where I can browse/select the file i need to recover. Is there a way to change the timeout behavior?

I can't see why the replication process can't see the existing seed source.  I included in attachment to  this ticket screenshots of settings and cloud inventory information that I expect should satisfy the job requirements. 

Hi Community.I have a central (physical) Veeam Enterprise backup equiped with LTO Drive. On this server i have setup local repository.On my other server i setup Veeam to backup on the repository of this central server.If i create a backup tape job, he see these repository empty. Do i have to made a classic “file backup” to tape ????? Thanks

Hey Everyone... With the recent announcement of Broadcom changing their offered portfolio...   As of today Feb 12, 2024, VMware vSphere Hypervisor (free edition) is no longer available on the VMware website.Along with the termination of perpetual licensing, Broadcom has also decided to discontinue the Free ESXi Hypervisor, marking it as EOGA (End of General Availability).Regrettably, there is currently no substitute product offered.  For more information, you can check out the official KB article.  https://kb.vmware.com/s/article/2107518?lang=en_US