Discussion Boards

Recently upgraded a client to a new server, running ESXi. It has 2 windows servers and a win10 backup and replication server as VMs. The old server was also ESXi only running 1 windows server and the windows agent. When I first tried to bring the new server up starting with a bare metal restore of the original server I ran into problems because Veeam would not restore the server to a functional state because it was a standalone domain controller. There were many suggestions on how to correct this but none of them worked. Finally I got around this by setting up a new windows server on the new hardware with the old server still running on the old hardware, and made it a BDC. Then when I turned off the old server and restored it to the new hardware it synced to the existing Domain Controller and worked normally.Now I want to take backups from the same vm on the new server, and restore to the original vm on the old hardware, which will be in a different location, creating a disaster recove

12/23/2024 2:34:40 PM :: Error: The request could not be performed because of an I/O device error.Asynchronous request operation has failed. [requestsize = 1056768] [offset = 132376780800]Reconnectable protocol device was closed.Agent failed to process method {FileBackup.SyncDirs}  

Hello.How can Veeam Backup Enterprise Manager be made fault-tolerant, there are several data centers, in case of loss of one center where the Veeam Backup Enterprise Manager virtual machine is running, how can I retain access to Veeam Backup Enterprise Manager without recreating the virtual machine?

Hello,We have an on-prem Rancher RKE2, and we have backups setup of k8s applications via Kasten.Question I have is: -  Is there a way we can exclude a directory from backups? The directory is inside a PVC of the application. This directory is a cache of files in S3 bucket so it does not need backup (as per application owner).I have not had to do this yet so any guidance will be awesome.Thank you,

TeamNeed your advice and support on below topicWe are using AWS S3 for cloud backups, with the on-premises performance tier, the cloud capacity tier set to S3 Standard class, and the archive tier set to Glacier.The data transfer from on-premises to the cloud uses Direct Connect and the S3 private endpoint, which works perfectly fine.The issue is when data moves from the capacity tier to the archive tier. This process is handled by a helper appliance, which uses the S3 private endpoint for transferring data from capacity to archive tiers and for deleting data from the archive tier. These activities generate significant data transfer costs.If the helper appliance uses the S3 gateway endpoint instead, it would be free as per AWS. We need your assistance how to instruct the helper appliance to use the S3 gateway endpoint instead of the S3 private endpoint. 

As many of you know I have written three books on Veeam starting at v10 and the last one being v12.  I am working on the outline for a fourth book that will use 12.3 and focus more on the security aspects and enhancements to Veeam.Once the outline is complete (working on this over the holiday break) they will ask me about technical reviewers so I wanted to solicite the community to see if anyone is interested.  I have had people like Rick Vanover, Matt Crape and Craig Dalrymple be technical reviewers and be recognized in the beginning of the books.If there is anyone out there interested in this contact me by DM and we can chat.  I just need name and email address to give to the publishing company when the time comes.  I appreciate any that volunteer as it is a bit of work to do and there will be deadline dates to meet.If there are any questions please post them here so I can answer for all to see that might be considering this.Appreciate this wonderful community as always.

For the past few weeks, I have been experiencing difficulties troubleshooting an issue that is causing failures in my backup jobs. The problem started following a power outage, and I have not been able to identify the root cause.Could you please assist me in resolving this issue? I can provide further details and logs if needed.  In the logs i found some entrys [16.12.2024 20:02:51.302]    <01>    Info (3)    Job session 'bfd333b9-d621-450b-affa-c7904e05fe9b' has been completed, status: 'Failed', '0 B' of '0 B' bytes, '1' storages in '0' tasks, '0' successful, '0' failed, details: '', PointIds: [][16.12.2024 20:02:51.362]    <01>    Info (3)    [CJobLogsManager] Cannot find quota. JobId : 3424b4e5-76da-46c3-9efe-f91723879d58. 

Hi All,Because network topology, our veeam have to backup server fram on different site  ,our backup proxy、gateway server、vc on the other site and veeam on another site,all have manage ip can be access , a user  would like to inquire if it is possible to provide them with backup lab in addition to veeam, when the backup job starts, they use backup lan to perform backups instead of managing lan?

I’m a newb Veeam user.I have a WS2022 server with Hyper-V installed on new server.  A vendors app would not function properly on a guest due to USB Pass-through.  In order to get the application working we left HV installed on the server and installed the application on the HV server itself, IE: BareMetal App server.I have an upcoming project which will hopefully get the application migrated to a guest.  In the mean time, it would be nice to backup the Server. I have a guest on server (TEST), and Veeam guest backup works fine.I try to run an agent based backup job, to copy the entire server:I get this error on my Veeam Server:  12/18/2024 2:25:04 PM :: Processing Hyperv.XXX.com Error: Failed to connect to Hyperv.XXX.com:11731Will the Agent work properly if I uninstall HV?  What do I need to do so that it will work? 

Hello,I’d like to evaluate Veeam’s backup solutions. I’m trying to install Veeam Agent for Microsoft Windows on a Hyper-V Server 2019 OS, but any attempts ends with a failure. Checking the installation logs reveals the error message "System.ComponentModel.Win32Exception (0x80004005): Fatal error during installation". This instance of Hyper-V Server has no additional software installed, including anything related to SQL Server (which seems to be the cause of this issue, as I found out from other topics about this error code).Is there perhaps a component that’s missing on Hyper-V Server that’s required for Veeam Agent to work? 

TeamI have scheduled a weekly health check job for all active jobs, but unfortunately, we have not received the report via email, nor is it possible to generate it in an HTML format similar to the backup job reports.Could you please assist with this? Additionally, the SOBR job results are not as effective or detailed as the daily backup job reports.

Hi Community We woke up one day to a dead HDD. We are replacing the entire server, as the server is or was over 12 years old. New DELL Server coming in, which will be the host, and internal SSD drives now. It will have ESXi 8 on it. My question is. We had 2 servers (virtual machines) on the old server, both using Veeam Agent 6.0.2 shooting images to Wasabi, and incremental, with periodic full images on the weekends. This has worked for us for years, starting from Version 4 until today, we upgraded versions along the way. But never been in this situation. Being that the Windows Agent was directly installed on the machines that were affected, and now dead, and being that Wasabi has all our data, does anyone have a suggestion how to download those images or I should say, restore the vm’s to the new host? We have a few ideas, but with Veeam, making one wrong move can take hours and hours as you have to wait before it fails, where you think its potentially working. We’re pretty stuck and in

Hi everyone,How does a worker instance deployed in a “production account” access a S3 bucket repository in the “backup account” if there is no S3 bucket policy, cross-account IAM roles, etc. in place? Not sure if this is relevant but I’ve shared a VPC subnet between the production and backup accounts for the worker instances to use. I’m using the Veeam provided IAM roles for the backup appliance (vaws1-VeeamImpersonationRoleV1-XXXXXXXXX) and worker instances (VeeamInstanceBackupRestoreAccessRoleV1-XXXXXXXXX). What am I missing here? Thanks!Steve

When trying to deploy the worker instance to another account and in the North Virginia region, the error Processing instance failed: Cannot find any IAM instance profiles associated with IAM role arn:aws:iam::accountnumber:role/VeeamWorkerRoleis being displayed.We have already validated communication with the endpoints and egress and ingress rules in the security group on port 443 and it is ok.The roles and permissions as well as the Worker profile are also correct.Has anyone experienced this problem?Thanks.Cláudio Hipólito 

In our Veeam environment, we scheduled for backup job to tape face such kind of status and time is too long. Please help to share your experience of this kind of issue. Please kindly see the attached.Thanks.

Dear All,Do we have lab setup for trying configurations of HPE MSL Tape Library with Veeam.Thank You

Dear Community, To reach this step, I resolved the error "SSPI authentication failed for user" by following the steps outlined in the official Veeam article: https://www.veeam.com/kb4542 However, I am now stuck at a point where I must assign the appropriate permissions to proceed. Could someone please guide me to where and how to assign the necessary permissions?    Your advice and suggestions would be greatly appreciated!  

Hello everyone,I was surfing the internet looking for a topic about VMware and I accidentally found this publication. It's only 25 pages long, but it explains in a very objective way how backup works for VMware. I found it very interesting for those who have little knowledge of VMware. It's well worth reading!It addresses the topics in a light and simple way.I recommend it to all of us! Even to value the writer “Lawrence Miller”  

Hello,I just read this solved topicIt’s very similar to my case but it doesn’t resolve it…The wizzard can connect to my proxmox node with root account, I validate the host key, it get storage information but when I click on “apply” at the end of the process :  I try to check in the server log but I can’t see anything significant.In the topic I have linked, it talk about checking logs, can you tel me precisely wich log I can see ?I check on the promox node with journalctl and in /var/log but maybe I’ve missed something ?On the windows veeam B&R server, nothing in the event viewer … The other post solution is to remove MFA from root account, is there an other place to do it than on the proxmox web ui ? Thanks for your help

Hello,I’m using Ubuntu 24.04 and I would like to know how do you configure firewall on this system to allow only required port please ? If my research are correct, I could see I need only 22 + 6160 + 6162 port open and Veeam open the others when neededI think I understand the commands are differents if you setup it before you add it as managed server or after. Could you provide me both solution please ?  Thanks for your help

Hello, when we onboarding our M365 tenant to the VDC there is a requirement that we need Microsoft Global Administrator account.It’s will work for Global Admin with MFA enabled?

This is a quick post on how to setup the newly published Veeam Hardened Repository (Rocky Linux 9.4) base.  I will post a quick guide later but for anyone else who deploys and wonders. Default username: vhradminPassword (changed on first use): vhradmin

We are using azure blob storage with immutable as our Veeam backup immutable backup. (Directly to azure with immutable). now, we are using azure export the blob storage to azure data box. Can we restore the data from there?From Veeam article, Veeam mentioned that “You cannot offload immutable data to the Azure Data Box Device”.https://helpcenter.veeam.com/docs/backup/vsphere/data_box_seeding.html?ver=120#preparing-azure-data-box-for-shippingI just want to confirm that this article referencing Azure Data Box as a target inside the Veeam software. Once the data is produced by Veeam you can copy it anywhere? or we can't copy to other placeExport data from our repository on Azure Blob immutable storage, get the Azure databox shipped to us, and then restore from the data box 

Here is a brief video with introduction to Veeam Cloud Vault and demo, from my colleague James Blower (Veeam UKI - Enterprise SE). In this short video he runs through how quick and easy it is to setup Veeam Data Cloud Vault and sleep easier at night with Immutable, Encrypted backups.  

Hi All, I want to know Veeam to backup Nutanixby deploy more than one workers, can it choose which worker backup which host's VM for the backup job?