VeeamON 2025 San Diego, California
Hi All,We are designing a new Veeam Backup Solution. This will be a hardened solution with Linux OS on REPO Server for immutability Snapshot integration will be setup for Veeam to backup from NetApp Snapshots Solution will consist of virtual VMware proxy servers, 1 physical server as the repository server with RHEL installed, iSCSI connected Storage Area Network (SAN) Storage to provide the Repo storage to this RHEL physical serverWe need to understand the Storage Area Network (SAN) Storage requirements such as how much RAM, CPU that SAN should have on the 2 controllers? The Physical RHEL repo server will have 128GB memory, 2 x 18 core CPUs and can see the sizing detail for this in the vse sizer, however have not been able to see sizing around the SAN and the RAM/CPU they should have as we dont want to be in a position where the SAN Controllers are struggling. Thanks,
Bonjour,Je sais que le sujet a déja été abordé mais j’ai le probléme sur un serveur 2016 qui a un role RDS/AD/FSDepuis l’installation de l’agent sentinel One (23.2.3.358) il n’est plus possible de sauvegarder quotidiennement l’état du serveur.Cela a l’air de bloquer surtout les Srv2016/2019 et pas les 2012R2.J’ai demandé au support informatique de mon client qui supervise le deploiement, mais je n’ai pas de réponse a ma demande d’avoir la passphrase pour arriver a faire passer les commandes que j’ai pu voir sur le support.Je pose donc ma demande ici en désespoir de, car je n’ai pas le droit de desinstaller l’agent Sentinel, mais je dois sauvegarder rapidement et réguliérement ce TSE.27/02/2024 16:03:38 :: Error: Failed to enable DC SafeBoot mode Cannot execute [SetIntegerElement] method of [\\SRVTSE\root\wmi:BcdObject.Id="{87XXXXXX-c9cd-11e9-b85d-4cd98f8782b4}",StoreFilePath=""]. COM error: Code: 0xd0000022 Merci d’avance pour vos pistes, si je n’arrive pas avoir la passphrase je vais
Environment: Win1022H2, Veeam Agent f. Windows 6.0.0.960, 6 local drivesWhen running backup CBT is functional for all but one drive.Trying to restore gives “driver not installed”There is no option to install Veeam CBT driver Any ideas? Klaus
Hallo allerseits,der Performing backup files health check dauert nun schon 18 Std. und steht bei 60 % done. Während der letzten 6 Stunden wurde gerade einmal ein Zuwachs von 4 %-Punkten “geschafft”.Ist das normal?Ich habe ehrlich gesagt keine Lust, den Rechner noch die nächsten 4 Tage laufen zu lassen, bis die Aktion ggf. mal abgeschlossen ist.Ich nutze Veeam Agent für Microsoft Windows und habe vorgestern ein Backup auf ein NAS durchgeführt (6. inkrementelles).Nachdem die Sicherung wohl abgeschlossen war und der Health Check durchgeführt wurde, wurde die Netzwerkverbindung unterbrochen, der Check konnte nicht abgeschlossen werden.Seit gestern Abend wird nun der Health Check wieder (weiter?) durchgeführt.Hat jemand einen Tipp für mich wie ich den Vorgang beschleunigen kann oder was ich überhaupt machen könnte?Danke vorabGruß Ute
Hello Veeam Community,there is a problem to connect to our SP Console.When i use the URL we configured with our Cloud-Gateways vcc.xxxx.de and i validate the Certificate from the SP i get the Error: Connection to Cloud Provider cannot be established.Has anyone some ideas to solve this Problem?Thanks for help!
Hi,i have a customer with openshift cluster 3.11 i installed kasten with 4.0.2 for migration purpose, and everything went well.the customer is forced to restart the api server in order to renew the certificate.after the restart Kasten is not able to discover the application inside the cluster. and give me a warning: access denied (user does not have LIST permissions on cluster-scope resources)i didn't configure any RBAC or authorization, i just installed it with the default sa k10-k10 with token authenticationany suggestions?
Hi,I want to test Kasten to see if it will fit in my future k8s cluster but I can’t access the dashboard and I see the pod gateway is always crash and restartgateway-5765cd558f-b5zbs 0/1 CrashLoopBackOff 7 (4m32s ago) 11mwhen i do:kubectl describe pod gateway-5765cd558f-b5zbs - n kasten-ioin the events I see this:Events: Type Reason Age From Message ---- ------ ---- ---- ------- Normal Created 17m (x2 over 17m) kubelet Created container ambassador Normal Started 17m (x2 over 17m) kubelet Started container ambassador Normal Killing 16m (x2 over 17m) kubelet Container ambassador failed liveness probe, will be restarted Normal Pulled 16m (x3 over 17m) kubelet Container image "gcr.io/kasten-images/emissary:6.5.5" already present on machine Normal Scheduled 15m default-scheduler Su
Hi,I have successfully installed K10 in my AKS cluster and performed preliminary checks as per the documentation. When running the script curl -s https://docs.kasten.io/tools/k10_primer.sh | bash, all checks passed successfully.However, when attempting to execute the command curl -s https://docs.kasten.io/tools/k10_primer.sh | bash /dev/stdin csi -s azurefile-csi-premium, it failed with the following error:Error: {"message":"PVC failed to become ready: had issues creating PVC: failed to provision volume with StorageClass \"azurefile-csi-premium\": rpc error: code = InvalidArgument desc = copy volume from volumeSnapshot is not supported","function":"kasten.io/k10/kio/tools/k10primer.(*TestRetVal).Errors","linenumber":168,"file":"kasten.io/k10/kio/tools/k10primer/k10primer.go:168"} According to Microsoft Azure File CSI Driver documentation, restoring a volume from a snapshot is not supported for Azure File. The error suggests that Kasten K10 is encountering issues due to the limitations
Hello all, is there any possibility to have report directly from Veeam? We have Veaam v12.2 for really small environment and Installing/configuring VeeamONE is a big hammer for this nail.I would like to have same report as you got when you right click on completed backup job “last24 hours” and click on report. I didn’t find anything that can do that automatically to file.thanks,Ladislav.
I have a 2 node ESXi 7.0.3 host setup and running Veeam v12 to backup 5 VMs to a NFS share (all production VMs exist on node A, NFS share is BSD VM on node B). The thought is that currently all production VMs can run on a single host and a backup copy of those can be created in a VM on host B. Each server has qty 2 10Gb network interfaces and I have connected both NICs in a port group and virtual switch along with creating a vmkernel interface on both hosts referencing the correct port group. After reconfiguring VMWare, I rescanned both ESXi hosts in Veeam and started the backup job. I am not convinced that the process is using the new 10Gb link between the 2 hosts for the transport process. What am I missing?
Hi Team, Am facing issues uninstalling VeeamBackup&Replication_11.0.1.1261_20220302.Control panel does not show any Veeam program but when I search through cmd it shows below components. When I try to remove VBR Server is gives error unable to connect to SQL server. Value cannot be null. Parameter name TargetHost. Could you please help if anyone has faced and resolved this kind of issue.
hi veeam communityIn version 12.1, extraordinary security features are offered, one of which is Early Threat Detection.I want to know what is the out-of-band restore point that is marked in yellow in the picture and has anyone used this feature and has any experience about it?
Hello together,how can I reverse a hardened Repository on Ubuntu 64 to a normal repository?Thank youRalph
ciao, come dice questa paginahttps://helpcenter.veeam.com/docs/backup/plugins/rman_operation_modes.html?ver=120 con la 12 il plugin di RMAN può lavorare in Standalone, praticamente come era con la 11, oppure in Managed.Mi sono abbastanza chiari i due modi, quello che mi domandav(an)o è:se sono in Managed Mode programmo i job di protezione dalla console Veeam.Rimane possibile lanciare dei backup ‘manualmente’ (o con degli script) tramite RMAN da parte del DBa, oppure no. E quindi, se c’è questa esigenza, si deve restare nel vecchio Standalone Mode?Avete fatto qualcosa di simile in qualche caso?Grazie!
Good morning,What is needed for - Be individually certified at the commercial and technical level - Be an authorized reseller of the Veeam solutionSincerely
ciao, con la 12.1 si può fare l’immutabilità con i DataDomain: qualcuno ha già implementato la cosa? Feedback?grazie 😉
We are getting below error message when trying to run a manual backup via VEEAM Plugin.[ERROR] Failed to backup database ABC. Error: Stopping job session Anyone has any idea about the cause and fix?
I started installing Veaam backup&replication (v12). I ran out of space on the VM where it was installed so I aborted the installation. After I did that I got the following error when running setup.exe:An error has occurred: C:Program FilesVeeam Backup and Replication CatalogVeeam.Backup.CatalogDataService.exeI deleted as much as I could and can't find any traces of Veaam. Then tried again, but it doesn't work. Server rebooted several times as well.
Hello all, I have been looking in the forum but I have not found information. In my job we are using Nutanix objects, one of the buckets shows 450 TB of usage space on Nutanix, but when I review on veeam the backup software it only shows 90 TB. Is there an issue with this space not being reclaimed?, on a previous post, I found ReFS takes some time to free up space and show the proper amount.I hope you can shed some light on.
i have a problem. if the job starts it will finally give me this error: Error: Failed to call RPC function 'FcReadFileEx': An unexpected network error occurred. Failed to read data from file and the file is on a synology NAS and i can just enter that device and also i can just make a network map to the directory where the files are.. but somehow veeam stops working allready for a week..network is checked.. and all is Ok and i can reach the volumes etc..i did restart the veeam server VM and also restarted the services but still not working..if i go to the backup reposority and do rescan on the backup locations it will give the same errors..I cant find here any info about the error i have and hope someone can help me.the error from the mail is:Error: Failed to call RPC function 'FcReadFileEx': An unexpected network error occurred. Failed to read data from file [\\172.16.xx.xxx\VeeamBackupRepository\Escrow\VEEAM-Backup\1 - B2D ALL Daily Escrow\1 - B2D ALL Daily Escrow.vbm].
Hi Community,We are using as AV solution Sentinel One. This Solution isn’t standard included in the AntivirusInfo.xml for Secure Restore/SureBackup. So I had to create my own entry, based on very little info and no list of error codes. It’s working but I don’t feel 100% safe as it wasn’t standard included or supported. During a recent Veeam On Tour it was brought to my attention, that using a different AV solution other then the one that’s active on your server bring an extra level of security/check. Now standard on this windows servers os Defender installed.Defender is also standard part of the AntivirusInfo.xml. We don’t want 2 AV solutions add the same time active on our systems. However if we could for example with SureBackup start a PS script that activate Defender at the start of the job and deactivates it again add the end of the task. This would be a great solution to me. Has anyone here this kind of solution in place and would like to share the PS?What about the AntivirusInfo.
Forgive me for this new discussion and please do delete if it is not the right place to ask. I am trying to do a bit of studying around my job currently and wanted to clarify a few points with Veeam (in the process of doing a small course). I'm getting very confused with the differences between forward incremental and reverse incremental backups and wondered if you could clarify. Am i correct in thinking when choosing forever forward incremental backup, that if there is no synthetic backup scheduled, then the first full backup is completed followed by incremental the days thereafter. Therefore, if you wanted to complete a full restore, you would need to restore that original full backup followed by every single incremental up to the date of the full restore?And if a full backup is done, the retention period is approx 6 months and there are no synthetic backups scheduled.. then if there is a day mid way through that the backup job fails, then this runs the risk of not being able to res
We recently purchased Veeam Orchestrator, and I’m going through creating a plan.Is there a course or class that goes over how to configure it? I’m not sure what type of Plan (CDP Replica/Replica/Storage/Restore) I should be choosing. I didn’t find a way to choose the individual servers or exclude VMs from the plan. From what it seems, I need to create new backup jobs of the critical VMs I want included on the plan.For some background I am backing up from VSphere to a local repository and wanting to test whether we can restore to a DR site vSphere using the latest backups.I also noticed that during the install of Orchestrator it installs ONE and B&R. Does that seem right? I don’t recall seeing an option to not install those. From what I’ve read it installs a lite version, but I’m not sure if I should configure anything in them.Thanks!
Hello,Regarding Forever Forward backups, is it necessary to create period full backups (either Active or Synthentic), or can you just go with the initial full backup and everything else is incremental? (I know it is probably at least RECOMMENDED to do periodic full backups, but let’s not worry about that for purposes of this post/question) If you were to go with just the initial full backup then leave the rest as incrementals, what happens if you have a corrupt/failed incremental backup in the chain, but need to do a restore of a file? Is Veeam able (and smart enough) to work around it? (i.e., if it has a failed or corrupt incremental backup, is Veeam smart enough to start the next backup based on the last good incremental and basically ignore the failed/corrupt one?) Thanks! :-)
We have an onpremise Veeam server that runs the following jobs:1. Backup to local storage (weekly full, daily incrementals)2. Copy job to Linux hardened repository (immutable)3. Copy job to Azure Blob cool storage (immutable)Now i would like to have the Azure monthly backups moved to archive tier. I'm assuming i have to use SOBR for this. The following question arise:i create a second immutable repository with longer immutability, say 1 year. After moving the full backup, will it calculate ‘initial backup date + 1 year’, or ‘SOBR copy date + 1 year’? do i need a new container for this or can i just create a folder within a container? if a backup is still immutable can it be moved to the archive tier? copying backups obviously generates a large amount of traffic. Download backup from one repository, upload to another. Is there something i can do to limit the amount of traffic and costs? what's the risk here? To move data the local Veeam server needs to have modify permissions in both th
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
