Discussion Boards

Hi, we have TBs of data in our on-prem Veeam repositories that we would like to move to Azure (archive tier). We added object storage repo and choose Archive Tier but when we try to use copy /move data option to migrate off this data from our on-prem repos to this archive repo, this doesn't show up in the available target locations. We would like to get some advice on some of the available options that we can use to move our data to azure. We will hardly need this data to restore from but as a business requirement, we need to keep this for a few years. Thanks

Is anybody here having problems with Tape Library control through Veeam lately? I have jobs that have run for years and that even survived the V12 update a couple of weeks ago, but have now started throwing a fit every time a tape needs to be loaded/unloaded/inventoried etc. Every error is a variation of the “Failed to call RPC function” message, but with different specifics: LoadMediumByScsi, GetElementsStatusesByScsi etc. This only started on Friday, and is puzzling because it only affects our Dell ML3 (LTO6/LTO8) interchanger, but not the Dell TL2000 (LTO6).  I have tried the usual update of Firmware (Drives and Libraries, SCSI Controllers etc) to no avail. Removing and recreating the Library made little difference either (it loaded a tape ONCE then returned to the errors).  Rebooted the Backup Server AND the Library.  Has anyone dealt with this successfully or am I looking at new incident?

I have been looking at some information within the Veeam documentation, but it could not move forward due to some errors according to images. 

I’m sure I’m overlooking something obvious -- Veeam is running on a Windows 2022 server on the domain.When adding my non-domain Hyper-V host (Windows 2022) to the Veeam managed servers, the only credentials that work are hostname\administrator. Any other account on the Hyper-V host with full administrative rights is failing with --“Failed to connect to host XX.XX.XX.XXAccess denied or timeout expired.Check if you you have local administrator privileges on computer ‘XX.XX.XX.XX’.Possible reasons.1. Invalid credentials.2. Specified host is not a Hyper-V server.” I’d prefer to disable the .\administrator account on the Hyper-V host, so I’d love to know what I need to do to get my non .\administrator accounts working with Veeam. Thanks, Chris 

Hi, I have a backup copy job which runs forever. There are two VMs and I see the backup copy is backing up  the hard disk with no progress. How do I best troubleshoot it and I don’t see an option to cancel the job. I use VBR 12.1. I believe in earlier version it was possible to cancel a job. I use the immediate copy mode.Thanks,Edy 

Hello,I have 900 M365 users and now i communicate with our veeam partner to purchase VDC license.The vendor say we must make groups of our 900 users. Here i want to know it’s mandatory we should make some group for my 900 users? If yes, is there any best practice what kind of groups (should i make group by internal department or by any object will be backup)?

After doing a cold boot of the host server, the Veeam backup service has failed to run or come back online. When trying to connect through the client we receive the error message of “No connection could be made because the target machine actively refused it 127.0.0.1:9392”After checking the logs, we’ve found an error stating that it failed to fetch logical page (1:21805) in database 5 failed. It belongs to allocation unit 72057594191544320 not to 72057594190823424 

Hello together, we have the error when backing up two file servers: The hard disk capacity is under 80% utilization (several GB free).VBR 12 is usedThe target system is a Windows Server 2022 Can anyone here help?Thanks in advance :) 

Hello forum,When I try to create a new BR on the repository server, ‘theserver03’ is listed twice.For each server, if i click `Populate`, they show the exact same list of paths.Hyper-V standalone host Microsoft WindowsNot sure what is going on, and what I need to do?Thanks much, David    

Hi, I would like to know how Office 365 Backup counts license? The community edition is free with 10 license. Now I exceed the community edition by 3 license.In the backup mail I see types of:mailbox (which are users) OneDrive (personal drive) Web (Sharepoint sites) TeamsI assume the license count is a mixtured of the types? Right?

Installed Debian Bookworm on BTRFS, backed up with Veeam agent for linux to network storage.Tried to restore from internal SATA to internal SATA, using full disk restore.Restore mentions a warning after completion, could not update UUID. Don't now the exact wording anymore.After booting the system boots to initramfs with the alert: UUID=xxxxxxx does not exist.It appears nothin that can't be fixed with a live CD but IMHO this should not be needed.Is this a bug, known issue or am I doing something wrong?

Question for the service providers in the room. How do you handle customers who were VCC customers, but are looking to migrate their historic backup data from their VCC-B repo to elsewhere. No option to move between repos, and if we’re talking sufficient quantities of data, no practical way to download to local repo, before moving to new location (object for example).Thoughts? 

Hello, I have backup copy job to copy the bcckup to Azure File share. The VBR main repository using SMB and connection speed is 1Gbps. Connection from VBR to Azure file share via VPN site to site with 100Mbps internet bandwidth.What can i see is my internet utilization is still low, only about 20-30Mbps used. Is there any trick how to utilize the connection?  

Good day, Just like in BUEXEC and other backup software apps, how do you pause jobs in Veeam B&R 12.1?  Regards

In a SOBR (Scale-Out Backup Repository) if my performance tier is already a object storage (direct to object) is it possible to run a archive job to offload data to archive tier without a capacity tier? Or i would need first to offload to capacity then archive?

Hello!I trying to setup new backup SQL bases with Veeam Plug-in for SQL Server, but list of bases is emptyTested on two different virtual machines with two different verisons SSMS (17.9 and 19.3) - both not working. How fix this problem?Thanks!

Hi,I need to know that how can i take incremental backup along with full backup. because i cannot find the incremental backup option in wizard. Please help

 An environment contains the following infrastructure:1: Proxmox2: Open source Juno3: Oracle open source Can Veeam be used to migrate the above environment to Proxmox on new infrastructure? Thanks a lot.

We currently have Veeam for M365 v7 running in Community Edition mode since we are not using the product anymore. However, we have plenty of data from 2020 to 2022 that was backed up to a S3 Standard bucket. We rarely (read, twice a year) need to query or restore anything from it.Our Veeam rep is happy to provide a temporary license to reactivate the product for any job requirements, so the question would be - what is the best option to move this data from S3 Standard to a different tier, and what are the implications that come with this? My thought process was the following:Add a new S3 repo that is on a Glacier Instant Retrieval / Glacier Deep Archive tier bucket Create a backup copy job to copy the current data in the S3 Standard bucket to the newly created bucket above Delete the original backup / S3 Standard bucket holding the original dataIs this a supported / reasonable strategy? I’m assuming that the Archiver appliance would

Hey Team, We use strictly hyper v server core hosts to house vms in the environment. I observed a few things?Veeam successfully creates repos both azure and lcoal Veeam successfully added all the hyperv host servers showing all vms under each Error code - 32774 - Performing a Hyper V Backup Type for a vm under any host to a local repo FAILS - i observe a “logon as a service” error then i am directed by veeam support to read - https://learn.microsoft.com/en-us/troubleshoot/windows-server/virtualization/starting-or-live-migrating-hyper-v-vms-fails

Hello,In my home lab, the backup repository, running on windows server 2022, using REFS, using V: drive letterVBR is running in a VM on that same server, also on V: drive letter.If that server died, then i have lost all my backups, .vbm|.vib|.vbkSure, I use backup copy jobs but those are stored off-site , but for the sake of this topic, I want to ignore that.If i had a disaster i would have to download the backup files or do an instant restore over slow internet.So I want/need to backup the OS, the c: drive.Can i use that VBR to do it or what do you suggest?Thanks much, David 

Regarding the SQL database export, using SQL staging server, it appears that the export was executed from the existing production instance rather than from the Veeam backup storage media. This suggests that a direct export from the Veeam backup storage is not possible, which is what I wanted to verify.As a result, Veeam management tools will be required to restore the SQL database and its transaction logs to a specific point in time using the Veeam backup storage media.Is my understanding correct?

Hello, I would like to add an antivirus for the back-up analysis when recovering files. Is it possible to add this function from Forti-EMS?I can't find the config .xml file for veeam from Fortigate / Forti EMS.Thanks

In Veeam do we have any options to define and to  isolate a Backup traffic, to transfer from dedicate NIC on all Clients, customer have 2 NICS on all clients one used for there Data LAN traffic and recently added new NIC want to use for backup Lan purpose.Backup Lan should be used for Veeam backup/restore traffic . Currently all the traffic is transferred through data LAN.

I have a backup job for my desktop computer that has 3 SSDs, with the C drive being an NVMe drive. Once the job begins, NVMe usage jumps to 100% and response time also jumps to the 1000s of milliseconds. I have IO throttling enabled in settings but that doesn’t help. Basically makes the computer unusable while a backup is running because the computer is sluggish and stutters constantly.