Community

what does this “full restore point + key” icon mean when I’m looking at my backup data?  All of my backups are marked for immutability at the performance tier.  But only some of my jobs have the little “key” on the icon.The “key” icon is not listed in the documentation, at least not that i can find.  I’ve looked at https://helpcenter.veeam.com/docs/backup/vsphere/restore_points_icons.html?zoom_highlight=icons  but the icon I see in my console isn’t listed 

Hello,I would like to check with you guys if this performance is solid.I first created everything with WAN Accelerators that are physical machines with SSD, one for source and one for target side but it caused some problems and its not so convenient for me.Now I configured everything with Direct mode and I would like to see if this is a solid performance or not.Our connection on both locations are 1Gbps, around 750-850 Mbps upload/download speed.So this is from Primary Office to Secondary Office via VPN, 2 different countries.I have 3 BCJ, 1 is for 2 biggest VMs, and others are smaller ones.So the biggest VM is now left, all of the others are done but the Processing Rate is not so much to be honest, no other processes are running in the background.  

Heres the scenario:I have VBR server A with a SOBR that backs up to a local hardened Linux server,  then that offloads to AWS in region us-west1 (also immutable) .  I back up serverX to the SOBR. AndI have VBR server B that has configured an AWS repository in eu-central1 (also immutable) Can I copy the contents of the AWS bucket used by the SOBR between these regions (strictly in AWS, not using Veeam)  then import the copied object storage/jobs for serverX on VBR B and be able to restore from it?I know about the backup verification tool, but that can't be used for object storage.  

 WhyA Key Management Service (KMS) is a system or platform that securely stores, manages, and backs up cryptographic keys. These keys are used for encrypting and decrypting data, as well as for digital signatures. Key Management Services are crucial for organizations that deal with a large number of digital keys and certificates. They help ensure the security and integrity of sensitive information by providing a centralized and secure way to manage cryptographic keys. Without a proper key management service, organizations may face challenges in locating and managing their keys, which can lead to security vulnerabilities. A Key Management Service is an essential component of a robust security strategy, ensuring the secure and efficient management of cryptographic keys and sensitive data.FortanixThe Key Management Service by Fortanix Data Security Manager facilitates unified management of keys, encryption, tokenization, and secrets management across multi-cloud and hybrid infrastructures

Hi community, if you are using Dell Data Domain and you are planning to upgrade to v12.1, be careful and read well the documentation, especially release notes (https://www.veeam.com/veeam_backup_12_1_release_notes_rn.pdf): Dell Data Domain: the supported operating system version is 7.3 to 7.12. Upgrade to it, or thebackup jobs pointed to this repository will fail to start. As @foggy explained to me in the R&D forum, “earlier versions are already End Of Support from the Dell side and 7.3 is required for Retention Lock support from the API perspective“ Enjoy! 💚

I’m missing something simple here I thnk…all of my backups are unencrypted and I want to encrypt them, I set one to do that, stored the key in VEEAM and of course offsite too, but how do I know it’s working? I tried a guest file restore from that backup, picked a file, it restored fine, but nowhere did VEEAM asked me to provide the password..  I assume this is because it knows it, but that doesn’t make me feel comfortable with the process. I suppose the test could be to install backup & replication on another computer and try the restore from there? a bit of work though so I’m thinking there’s an easier way or am I worrying about nothing? 

Is there any indication of when the release date for Veeam Backup and Replication - v12.1 will be?

WOW, there are lots of amazing features in v12.1. This is one of my favourites. What yours?  

Hello,I would like to know why are there so many differences in performance of BCJ?This is all in one BCJ.Result of already finished one: Results of currently running one:  

I am confused (not an unusual occurrence ...). I have a LTO-7 tape library, with 3 tape drives. Right now, I have 9 tape jobs listed as running (we ran out of tapes this weekend, so I just loaded more). But only 2 tape drives have tapes loaded and are writing, the 3rd is idle. And I’m not sure why … there are empty tapes in the pool for the jobs (all jobs use the same pool), as well as FREE tapes in the FREE pool.So why is my drive idle? I don’t see any option that seems to say “Use only 2 of the 3 drives in the library at any one time”. I must be missing something here, but I can’t figure out what. It’s not an option for the individual tape jobs, right? I have those set to use at most 2 drives. I assumed that meant just for that one tape job, not for all jobs that are executing. So why isn’t Veeam loading a tape in that 3rd drive, and starting to clear my backlog? What have I done wrong? Thanks.

Another possible topic for a future VMCE study group 😃.We are not robots, although sometimes on a Monday morning I sure do to feel like one. I think that there are very few of us out there you can claim that our performance is always consistent. There are some people who I would term are forever 1 + 1 = 2. However, I know for a fact that I can be 1 + 1 =20 on a certain days, and before I quit drinking beer you could have stuck a random number generator in that equation for all my consistency was worth.We often hear about great athletes, artists and others talking about being in the “zone”. As I understand it this is a state where things are just flowing, complications become easy and performance is optimal. Whatever you want to call such a state we can probably all agree that there are times when we feel that we are getting the best out of ourselves and times when we are not. In other words there are situations when we are not performing to or even near our maximum capabilities. This

Hi everybody. I’ve put a small blogpost togethers about an issue I experienced last week with the all-in-one ISO to create a hardenened immutable repo. This ISO was GA’ed during VeeamOn during the session of @Rick Vanover@HannesK  and Christoph Meyer. (more info here ) It seems that the script is too eager to reinitialise all disks during the setup. So I ended with a blank GPT partition on an hybrid USB drive/virtual DVD device. 😬 All details can be found on my blog: https://integriservices.blogspot.com/2023/12/hey-immutable-script-do-you-just-ruined.html Maybe something that can be optimized with the release of an updated version. Thanks for all your feedback on this !

Hi Everyone,This morning I went and took the V12 Exam. There were some huge non related hurdles involved but in the end all was good. To start with the night before I got some other news that kept me awake for most of the night. You know something not awful, not great but enough to… keep your brain working. Then you start to get annoyed as you know that you have to sleep for the exam BUT getting annoyed also keeps your brain alert. In the morning I was completely exhausted. To make matters worse Winter decided to show up and it was freezing. I decided to go to a testing center which now after the pandemic are all located way out in Polar bear land. The transit app lied about the bus arrival time and I froze, then the transit app lied again about the second bus. Then I arrived and the test center folks did not show up 15 minutes early anyways so I was left to wander in the vast waste lands of suburbia parking lots with a billion mile an hour wind attacking me.Finally I got in and sat do

Hi, sorry for the noob question, but when backing up VM’s on Hyper-V, what is the difference between backing up the VM’s via Virtual Infrastructure vs. backing up the disk the VM files are stored on via Physical Infrastructure?  Is it just on recovery, it’s easier to restore the VM’s directly vs. having to restore each of the VM files such as the vhdx files?Thanks!

Hello everyone, Is there an integrated way to backup AHV VMs on NC2, or we should you agent backup?

Hi, I am testing Backup and Replication Community Edition and have a very simple test environment consisting of a single Windows Server 2022 with one boot SSD, two HDD’s and a third HDD which is my dedicated Backup Repository.  When I start the job, it take over an hour before it will begin to process/transfer data.  Is this normal or is stuck waiting for something before it can start the backup?  The server really has no load on it as it is a test machine (physical, not virtual).  Below is a screenshot: Any thoughts would be much appreciated.  Thank you!  

For those that could not attend and are not members of the VUG Canada group you can watch the webinar on the VUG Canada YouTube channel below -Also, the slides are attached as well from the presentation.Great job again @Tyler Jurgens and @HangTen416 

IntroductionRansomware attacks are top of mind for all IT professionals and backups are the last line of defense.The single most important best practice is to make sure you can recover from your backups by: Implementing immutability Encrypting your backups Verify recoverability Have a recovery plan Harden and limit access to your backup infrastructure, especially the repositories.  Ample security guidance can be found in Veeam's user guides and best practices.Curated by Veeam Solutions Architect and Systems Engineers, Veeam has also published a library of Technical Security Blueprints to address joint Vendors configurations. In this post, I would like to focus on Hardening and Limit Access to ObjectFirst repositories. For those unfamiliar with ObjectFirst, it is a Veeam dedicated S3-Compatible Object Storage appliance that implements Out Of The Box Immutability (Ootbi) and leverages Veeam Smart Object Storage API.My colleague, SteveF, has blogged about the SOS API and ObjectFir

Hi Everyone, I am planning on moving my blog. What seemed like a great deal at the time has turned into an expensive auto-renewal at the worst possible time. Luckily I changed my CC so .. 😁 no auto delete $$ this year. What are the alternatives? What do people pay? What is the best method to download my present blog content? Any help would be appreciated.

Hello,I would need some general advices in creating Backup Copy Jobs.Is it okay to choose every Backup Job and insert it in the Backup Copy Job, as I can see there is no option to create in which order they will perform etc.  

Hello Forum,I’m getting this weird error now: What could be a cause for this, two Backup Jobs finished successfully and now I get this error and its stuck.

Hi Everyone,I have moved forward on my home lab. Proxmox is installed and I am finding it very intuitive. I now have to see about what I can do about a Veeam setup (can I nest a Veeam supported Hypervizor in there etc). I have also added one of those ethernet over power lines connections to my basement. That also seems to be working perfectly, hooray no need to rip out walls for cabling. I got to thinking though, so many of us need to test and play with Veeam outside of work confines and the info about home labs is scattered all over the site in different posts. Do  people think it would be helpful to have a separate Home Lab section. This is a place where newbies or people re-thinking their setup could come with the ultimate goal of getting more lab exposure to Veeam. Or should we just leave as be and use the search function? What does everyone think? Again I don’t know how feasible this would be and it would not be a new group per-se. Just an idea.

I had a discussion recently about backing up ‘standalone’ ESXi servers, without the vCenter Server application. The discussion started around we were sharing my homelab but the use case became attractive for retail, edge and other ROBO scenarios. Why no vCenter Server Application?I do not run the vCenter Server Server Appliance (vCSA) at home simply because I don’t need it. At home I recently simplified my home lab. In March and April, I had to work from home for a while and it made me think about the home lab since I wasn’t travelling. I upgraded to a new host (still on vSphere) but really don’t need the vCSA. I do *not* use the free ESXi hypervisor, as I use the vExpert license on the host to unlock the full APIs that I need for backup. In our work lab environment, we definitely use the VCSA for a number of environments and if I need that type of environment, I’ll do that over there.It’s interesting when you use the ESXi host in a licensed mode, it allows a number of Veeam capabiliti

Hello. We have a policy to export all tapes currently in a library that are marked FULL. I can get a list of all FULL tapes in a media pool like this:[String] $LibraryName         = Get-VBRTapeLibrary | Select -Expandproperty Name$TapesToBeEjected     = Get-VBRTapeMedium -Library $LibraryName | Where {$_.IsFull -eq "TRUE"} | Select Name, LastWriteTime, MediaPoolID | Sort -Property Name (there’s more to my script, but that is the relevant querying section) However, that gives me *all* tapes in the pool that are FULL, and I want only the tapes in a pool that are currently ONLINE in a library that are FULL (so it can send an email to the tape operators and tell them to go export the tape(s)). And I have not found a way to do that - I don’t see any property that is returned that shows ONLINE or OFFLINE of a specific tape. Am I just missing it? Is there way to query for this, so I can send an alert email (as a scheduled task)? Or is there some other way to do it? (we don’t have a license fo