Solved

Hello Team, I recently passed the VMCE v12 Exam however the name on the certification badge is incorrect. How do I update the name on the badge? Any help would be highly appreciated.

Hi, I am designing the replacement architecture for our Veeam Backup environment and need some help understanding where the traffic flows when using hardened repositories in a SOBR. Our current environment we have the backup server at a remote location with direct attach storage and a backup proxy at our data center with direct attach storage.   Each day incremental backups run at the datacenter writing backups to the backup proxy which are then copied to the backup server at the remote location.  Each month synthetic full backups are created at the remote location.  The hardware is end of life and needs to be replaced. I would like to keep the backup server and backup proxy and utilize hardened Linux repositories at both sites.   The primary backups would be configured with a 14 day retention period and incremental backup mode.   The backup copy location would consist of 3 Linux servers with 28 8TB SSDs set up as hardened Linux repositories.    What I need to understand is when synthe

I just got all of our systems upgraded to v12.  With that said, I have two clients using hardened repo’s and two different people set them up, neither of them were me, and the system I’m working on now - the engineer that set that up left the company and moved on a couple months ago.  I planned on dipping into these a while ago but never had the time and am now thrust into it.  And my linux skills are still fairly basic, maybe intermediate at best.So here’s what I have:The configuration, not that I think it matters, but is a Ubuntu VM running on a Synology NAS with a virtual disk mounted to the VM.  I upgraded from v11 to v12 but the repository became unavailable during this process.  Single-use credentials are in place and I think I’ve mostly got around the learning curve on this, but can’t quite make connections on things.There are two accounts, I’ll call them “repouser” and “admin”.  Repouser is the account that should have permissions to the repo at /mnt/veeamrepo/backups.  Admin i

Hi! I’m using a NFS share for K10 DR. The retention policy in the DR policy was changed to only keep 1 hourly version. Therfore only one version should be kept. It looks liket the old version get retired. But the space on the nfs volume isn’t freed up. Also the usage report shows that the storage is in use by kasten-io. What can I do to free up the space? Is there any manual disk space reaclaim job which needs to be run?

Hello, I have configured oidc auth on my Kasten K10 instance.The SSO returns the user groups.If the user is in the group k10-admins, they get unrestricted permissions, which is as expected, and are redirected to the K10 dashboard.The problem I confront is that users who are not in the k10-admins group also access the dashboard but do not see any data. On their profile, they can see that they have no permissions at all.I want to restrict access to the K10 dashboard page for users who are not in the 'k10-admins' group, similar to standard login procedures. Best regards, Mike

I had a few questions about backup from onsite computers to the cloud. I am currently using the community edition of veeam backup and replication. The backups are currently going to onsite storage. Does the community edition has the capability to backup to cloud storage? If so how? Is there any difference between the community edition and the essential edition aside from the number of workloads they can support? I see that veeam supports backups to AWS, Azure, and Google. Does veeam support backing up to other cloud storage providers?

Hi,I’m experiencing problems while using blueprint to backup my mariadb. I’m using the official blueprints example provided.the error is :'could not render object reference {mariaSecret}: template: config:1:15: executing "config" at <.StatefulSet.Name>: pointer evaluating *param.StatefulSetParams.Name' Hope someone can help me.Thank you

Hi all,I am having my blueprint for backuping elasticsearch database.Blueprint looks quite the same as the original one, but with just hardcoded values for username and password.But, unfortunately, I am getting this errorLook at the first line of the snapshotAs you can see, my {{ toJson .Profile }} is not even rendered correctly, so I am getting value of ‘null’ for that.Not sure why that is happening. My elasticsearch statefulset, which I am trying to backup, is running inside ‘elastic-kasten-test’ project on OpenShift. And my kasten pod are running inside ‘kasten-io’ project. Strange thing is that I cannot see profiles from elastic-kasten-test project, but I can see them from kasten-io project.Cannot see profiles in elastic-kasten-test projectProfiles seen in kasten-io projectAlso, here is my profile on Kasten UI. Can someone please help with this?Thank you all in advance!

We have Kasten K10 on installed via operator on multiple clusters. All of the K10 instances seem to have excessive amounts of helm revision when viewed with helm history k10 Is this normal behavior? We seem to be getting ~200 revisions per hour.

Actually, we are using tape infrastructure and want to take file level backup to tape. we tried to create file to tape job, but no luck. we reflected only Veeam server in source option. why does not show virtual infra in source tab or any other system/ server?  No need backup of Veeam serverHow to take virtual infra file level backup on tape?Please suggest

Hello, is it supported to have Hyper-v VM with bitlocker enabled inside the guest for encrypting the data disk ? 

This is going to be my first time setting up Veeam ONE (Enterprise Manager?). Where is some good documentation on the product as far as functionality goes. Also, what are some, if any, best practices for setting it up? Should I run it in directly on the VBR server or spin up it’s own VM? Anything will help at this point.  Thanks in advance!

Hi,i have a customer where he has application “redis” who is controlled by redis-controller, the redis namespace have 3 deployments, and the csi driver does not support the volume snapshot so we go with generic backup.only one of the deployments get injected by kanister sidecar, and the remaining two did not, after troubleshooting we saw that the 2 deployments didnt accept the annotation:”k10.kasten.io/forcegenericbackup”, and it will be removed automatically after a few seconds.is there any possible way to inject kanister inside these deployments without adding this annotation?

Hello,We have a user who has left the company, and their last backup on VBM365 is from 25/01. The issue is that we don't have any restore points, even though we have a retention policy of 7 years.What do you think could be the problem?Thank you.

I am trying to upgrade 11a (11.0.1.1261_22020302) to V12.1 via iso and when it gets to step 3 (Upgrading Veeam Explorers) a popup says that it can't find VeeamExplorerForSQL.msi_explorers.  Error: The feature you are trying to use is on a network resource that is unavailable.It is looking for that file in this location (which does not exist):C:\ProgramData\Veeam\Setup\Temp\80ca74a8-4c01-451b-b8df-3d76e7abf376\FixFiles\I can't find it anywhere on the machine.  I did find an old log file that references that file that references version 9.5.  I found that file inside an old 9.5 update.  I extracted it and put it in the location asked for, but it still does not like it. 

Hi there in Virtual World :)Running Veeam 11 - We experienced a complete full “Files to Tape” backup when the daily Tape job ran for the first time after entering Daylight Saving Time (DST) last weekend.ALL files in our backup Disk repository (xx TB) - that means UNCHANGED Veeam backup files from the last 4 months - was all sent to Tape once again - taking several job-runtime days to finish - and filling up a lot of new Tapes, which we needed to supply into the Tape library.Have anybody else experienced similar issues?As far as I have read  - Veeam operates in the UCT format - which should not be sensitive due Server time changes or DST - except changes in the local job time schedule:Daylight savings time - Veeam R&D ForumsDaylight saving switch changes job start time - Veeam R&D Forums We didn`t have any other issues running the usual VM Machine jobs to disk.This issue has been raised to the Veeam Support - and it has been escalated to their RnD engineers.So hopefully they wil

Moin,besteht die Möglichkeit bei dem Enterprise Manager einen Cloud Connect B&R und einen normalen B&R hinzuzufügen, denn ich habe immer das Problem das er die Lizenz von den EPM nutzt. Dadurch kann ich entweder die Cloud Connect Lizenz oder die B&R Lizenz einspielen und mir werden dadurch die Funktionen gesperrt. Danke

Hello guys,I m trying to used the Secure Restore with Sophos Endpoint Agent.Is not an antivirus implemented by default in the configuration files. So I tried to edit the AntivirusInfos.xml but for the moment I got the following error message :Here the part added:<AntivirusInfo Name='SOPHOS Endpoint Agent' IsPortableSoftware='false' ExecutableFilePath='%ProgramFiles%\Sophos\Endpoint Defense\SophosInterceptXCLI.exe' CommandLineParameters= 'scan %Path%' RegPath='' ServiceName='' ThreatExistsRegEx='' IsParallelScanAvailable='false'>        <ExitCodes>            <ExitCode Type='Success' Description='Command executed successfully'>0</ExitCode>            <ExitCode Type='Error' Description='Error during command handling'>1</ExitCode>            <ExitCode Type='Error' Description='Unexpected error during CLI setup'>2</ExitCode>        </ExitCodes>    </AntivirusInfo>Does anyone have already implement Sophos Endpoint Agent with Veeam

This is probably a relatively complicated one, but also not a critical issue for us as there’s sufficient workarounds. Not something I want to go through the trouble of a support ticket with at this time. Hoping a community member can make the seemingly complicated uncomplicated. Veeam 12.1. We have a number of systems in our environment that we use the Veeam Agent for Windows to back up. We are primarily on Nutanix AHV for our virtualization. The backups seem to work just fine. When doing some recent restore testing, we noticed something. The goal of the restore testing was to test restoring these agent backups to our Nutanix AHV cluster. When using “Restore entire VM to Nutanix AHV...” option, during the wizard when I get to the storage container page, it shows the computer, but with no disks. What I then found was that this “no disk” symptom also occurs if I use the “Instant Recovery to Nutanix AHV”, but it actually gives an error message of “The following machines have no disks, us

Hi Everyone,I am wondering if there is a license for Veeam ONE only (not VUL for Data Platform Advanced) as this license can be used to monitor the Virtual Infrastructure workloads that are not protected by VBR as the VUL is for 10 instances which is covered the backup instances and VONE monitoring for them but what I want to achieve is monitoring the others in the virtual environment, is that possible ? as I read in Veeam Licenses documents but still confused.Appreciate your cooperation

We have configured tape server and rescan, and inventory completed. but insert new tape in tape library and rescan and inventory done but doesn’t show of capacity or media in media pool?while creating media pool, does not appear anyone media? is there any requirement or any process? please guide. already go through following link but not work.https://helpcenter.veeam.com/docs/backup/vsphere/backup_to_tape_hiw.html?ver=120 help us

dears,we have an env where there 2 CSI drivers, ebs-aws that support volumesnapshot, and efs that does not.all pods and data are stored on ebs-aws, the pods on ebs generates a continuous logs and all are stored on EFS and saved as files. the question is, when we run the backup for the applications on ebs, the logs stored on EFS will be backed up and all are protected? or there is additional tasks to do?

I posted the below on Reddit, let me know your thoughts...We're in talks at work to make a new GFS repo where we keep X daily Y weekly Z monthly and maybe a single yearly on the Veeam repository and also take a copy monthly/yearly from said repo to tape and then off to the safe deposit box at the bank. What if I lose my repo and all that data. Yeah, I might have a few monthly/yearly at the bank, but I'm hosed on the daily/weekly side. All that history, lost. Is anyone have a redundancy approach they're using? We're thinking about using a couple Synology boxes in in HA mode basically where they basically stay in sync with each other. Let me know what you think. I also think we could use a second Synology box do do backup copy jobs and keep the same GFS retention points there...

I am trying to backup a physical server with a 81.7TB volume using B&R version 12.1.1.56 and Veeam VSS Hardware Provider version 6.1.0.349.  I have deployed the Veeam agent in managed mode and created a Backup Proxy of the physical server which installed the Veeam Backup VSS Integration and Veeam VSS Hardware Provider.  According to Veeam a volume greater than 64TB can be backed up using the Veeam VSS Hardware Provider.  I don’t know how to reconfigure the managed physical server and/or backup job of the server in the Veeam Backup and Replication Console to use the Veeam VSS Hardware Provider.  I do not have any option to Manage Volumes on my ribbon under this managed server as the Veeam instructions dictate.  I have run a Rescan on my managed server which successfully completes finding all disks and volumes but still no option to Manage Volumes on my ribbon.  How can I ensure my managed server and backup job are properly using the Veeam VSS Hardware Provider?  Everything else is w

Hello Guys,So i had a Hyper V server that was joined to the domain, and it was succesfully onboarded to veeam.Now it was removed from the domain and built-in local admin was renamed from "Administrator to new_username"Now we cannot onboard the sever to Veeam using the local admin with the new renamed name.I have updated the serverI have added the admin account to other admin groups on the serverUpdated WindowsStill no successAny suggestions would be helpful.