Community

Today I coming here for a simple post about compression Veeam B&R. So, I take a short VM Linux running an Active Directory for this.  Below you can see a full backup with a compression set up as Optional. And now you can see the same full backup with compression option on Extreme. How you can see the duration time was decrease in almost 20 minutes when I compress backup on extreme option. The target of backup on this example is an offsite repository. It has a low bandwidth if we compare with a local one. So, when we are planning our offsite backup policy,  the extreme compression can help to get better times on your backup execution window.   

Here is a case of sucess of Puma SE using Veeam. Let’s enjoy! 

Hello Veeam Community! For 2 days consecutive I receive this error below:This is a Linux VM as a file server running on ESXi enviroment. So, today, after I run this job mannualy I can see a health check on it. It lasted almost 40 minutes during the job. I don’t know what it exactly means. But now, everything is working properly! Did you already see or hear something like these?

During Microsoft Ignite participants of the Cloud Skills Challenge will receive a free exam voucher for certain cloud certifications.You can read the details here: https://csc.docs.microsoft.com/ignite/registration/March2021With the voucher one of the following exams can be booked:This exam offer is exam-specific and only redeemable for select Microsoft exams. Eligible exams include: AZ-104: Microsoft Azure Administrator DP-100: Designing and Implementing a Data Science Solution on Azure MS-700: Managing Microsoft Teams MS-100: Microsoft 365 Identity and Services MS-101: Microsoft 365 Mobility and Security DA-100: Analyzing Data with Microsoft Power BI SC-200: Microsoft Security Operations Analyst SC-300: Microsoft Identity and Access Administrator SC-400: Microsoft Information Protection Administrator  In order to participate you'll need to register for MS Ignite and complete on of the challenges. If you're not registered then visit this link: https://register.ignite.microsoft

If the answer is obvious and I don’t see it: sorry for my question!In a large customer setup, SureBackup is managed by script (cusomized: https://www.virtualtothecore.com/can-test-1000-vms-veeam-surebackup/). So VMs are dynamically added by a Application Group. For a long time, we put just one VM into the group. SureBackup jobs failed when this VM failed - most often because of timeout. Now we increased to two VMs per run. Now I see job is skipping second VM when first VM fails. My question: Is this a designed behavior with Application Groups? Did not find the answer in the helpcenter. 

Finally v11 is launched, but I will not stop to talk about small features and improvements For today, I found a modern (app) feature. It is about instant virtual disk recovery. Which is not new in v11, but it is new to restore a disk as a First Class Disk (FCD) in vSphere. A FCD - also called Improved Virtual Disk (IVD) - is a new disk type for modern - containerized - applications. It can be used in kubernetes environments, like VMware Tanzu, to provide persistent storage.More details about FCD you can find here:https://cormachogan.com/2018/11/21/a-primer-on-first-class-disks-improved-virtual-disks/ https://cormachogan.com/2020/01/14/first-class-disks-enhanced-virtual-disks-revisited/Idea for short: manage virtual disk easily even if it is not attached to a VM.With v11, a virtual disk can be instantly recovered as FCD. This also means, you do not have to attach the disk to a VM at restore time - this can be done afterwards! This is not possible when instant-recovery as "normal" VMDK! 

Hello everybody!I'd just like to know… What do you all think about this:   Almost 1 hour to backup a VM to a completely offsite reposittory.Obs.: It was across the Internet, not in some private network.

First time sharing, so feedback is much appreciated, but please excuse my code if it’s not up to par with those who have a lot more experience with Powershell than I. I recently had a client who -- for legal purposes -- needed to restore the same folder from two month’s worth of backups. Running 61 File Level Restores in the GUI seemed like a nightmare, so he opened a case asking if there was an easier way. Unfortunately, through the GUI there’s really not an easier way, but this sounded like a perfect scenario for leveraging some Veeam PowerShell cmdlets. I soon discovered that the FLR cmdlets don’t have functionality that supports a ‘Copy To’ feature like you’d get in the GUI, so I had to leverage what Veeam cmdlets we do have and then add in some good old basic PowerShell commands to then pull the data from the mount point (C:\VeeamFLR\ by default) and move it to the target, then loop through n-number of times based on the user input.Here’s what I came up with. I’m still working on

Continuous Data Protection (CDP) is a new feature provided by the upcoming Veeam VBR v11 mainly addressed for Tier-1 applications that cannot deal with data loss.Announced for a long time, the CDP technology allows you to configure the RPO Per Second and this can be done leveraging vSphere API for IO Filtering (VAIO). Install the Continuous Data Protection filter to hosts First step is the installation of the CDP filter to the hosts member of the cluster. The installation takes place in the Managed Servers section under Backup Infrastructure area. Before proceeding make sure your Veeam Server has been registered in your DNS infrastructure.Once the vCenter Servers have been added to the Veeam infrastructure, right click the source side vCenter and select Manage I/O filters. Configure the CDP Proxy To leverage CDP, it is required the deployment of the new CDP Proxy to handle the data. Although you can install different roles in the chosen Windows Server, make sure CDP Proxy is not alread

Hello All...We are moving from one Veeam Cloud Connect Partner to another.  We have already finished the migration.  We have disabled all of the Backup Copy jobs to the old partner and are ready to sever our relationship.  However, we want to make sure that the VCC Partner does not have access to the remote repos.  We do not suspect they will do anything but we just want to cover our bases.  I know when a backup copy job is created there is a setting to “Allow Veeam Cloud connect partner to manage this repo”.  Is it a simple matter of unchecking that box to prevent access?  Or should we completely delete the VCC partner from the service provider window?  We would like to avoid deleting them for a week or so since we still do not have 7 days of retention with the new provide so we want to option to get to that data if needed over the next week or so.  So will unchecking allowing them to have access achieve what we want?ThanksDave

Hi, greeting from newbie last month, our neighboring company was attacked by ransomware,it become worst because their datastore is encrypted too, they still use vmware 5.5 from investigation, they analyze that one server made network drives directly to the datastore,that's why ransomware is able to attack and encrypted the datastore. i want to know if it is possible to create a network drive directly? if attack the datastore is possible, I think veeam replicated server will be useless.

 Are you tired of typing kubectl over and over again?Hi Folks,If any of you are planning on taking the CKA or CKAD certification exams bear in mind that effective use of your time is very important for passing because they are both hands on practical exams with no multiple choice questions. I completed the last question of the CKA in the final minute of the exam!You can save a lot of time by creating aliases. So instead of having to type constantly kubectl you can create an alias k and type this instead. It is up to you how many you want to create during the exam but for daily work life these aliases are also huge time savers.Ahmet Alp Balkan has a great script to create many aliases for your home labs or work. If you are like me can just pick and choose a few and create them. https://github.com/ahmetb/kubectl-aliasesHere is a simple example to create a k alias for kubectl:open the .bashrc file in your home directory with your favourite editor Type in the alias (I normally put mine rig

Well if you applied to the Veeam Vanguard Class of 2021 here - Veeam Blog - Get ready for 2021 Vanguard class! you should be receiving your email today.I am happy to have been accepted for a 4th year now into such an amazing program.  Here is to all those renewed and new Vanguards.

This is a simple oneliner for the MSPs out there if you are needing to check if Ransomguard is enabled for your VCC tenants this will output it on the screen for you from Powershell - Get-VBRCloudTenant  | sort-object | FT Name, BackupProtectionEnabled, BackupProtectionPeriod You can also output this to a file that could be emailed as well.

Hi guys, another quick one-minute video, today there is about How-to create a Data Protection Policy for your Amazon Relational Database Service (Amazon RDS) using the new Veeam Backup for AWS v3Remember that you can get a fully functional (Free Forever 10 AWS instances) from here - https://www.veeam.com/aws-backup.htmlLet me know what you think for the format, and if you are using RDS Protection :)

Morning guys, Just noticed that Veeam have updated their help center documentation ready for the release later today.Veeam Technical Documentation Check it out to learn all about the new features :)

Hello All,If you missing the Veeam v11 launch event today, the official link is here, and register to watch,What’s new in Veeam Backup & Replication v11And the additional information is attached following link.Here is Veeam v11 resources URL, Veeam has updated their help center documentation, Download Veeam Products, and version comparison ready for the release today.Veeam v11 sharingCheck it out and learning all veeam v11 new features  

VBR integration for storage systems supports several useful features that optimize backup performance. Unfortunately for those systems built on the Universal Storage API (USAPI) some of those features are not yet available. One specific feature that is missing is the ability to orchestrate array-based snapshots on a secondary storage array.I’ve written a PowerShell script to be used as a post-job VBR script along with snapshot-only jobs for Pure Storage FlashArray which will replicate Veeam created array snapshots to a secondary FlashArray. It will also ensure that those snapshots are visible in the VBR console and available for recovery tasks including Instant VM recovery, Guest Files recovery, and Application Item Recovery. Download Invoke-PfaSendSnapAfterVBRJob.ps1 from GitHub. Detailed setup instructions. This script has been designed to work both with VBR v10 VeeamPSSnapIn as well as the brand new VBR v11 PowerShell Toolkit.  

I’m sorry, no v11 content here…I wanted to share this video on v10 which I’ve found in the Veeam channel; although it’s almost a year old I hadn’t seen it before. After viewing this video, the question is: Will v11 be even better?

Morning all! With under 8 hours to the launch event, make sure to sign up!Join the Live Event for V11 Launch (veeam.com) Here’s the time the launch event kicks off in some time zones: AWST (Australian Western Standard Time): Midnight (25th Feb)EET (Eastern European Time): 6PMEST (Eastern Standard Time): 11AMGMT (Greenwich Mean Time): 4PMPST (Pacific Standard Time): 8AM Time to level up to 11!

Afternoon! I raised a case with Veeam about the RTM that I don’t believe has made it into the GA in time so thought I’d mention here.Scenario:Latest Veeam v10a in a distributed deployment, with dedicated roles to each server. Attempting to upgrade to v11.Issue:When upgrading Enterprise Manager to v11 when it is the sole Veeam product installed, the main setup executable from the v11 ISO will incorrectly report that only v9.5u4b and above are supported for upgrading to v11.Workaround:After a discussion with Veeam support this is purely an issue with the main setup launcher reading an old attribute (this wasn’t elaborated on further). It is still supported to browse to the Enterprise Manager section of the ISO and run the installer from there. It will detect it is a supported upgrade path and install as expected.

Will The New Version Of “V11 Backup And Replication Community Edition” Be Released This Week?

HiWill CDP be compatible with Oracle ensuring transaction consistent replicas?

Hello,In this article, we will take a look at the scenario of Restore via S3 Compatible Object Storage. Part 1 - Controlling Our Cloud BackupsWe have successfully backed up our local.Thanks to the Scale-out Backup Repository capability, we have successfully sent the backup we have taken to our local to S3 Compatible Object Storage, which we added in the first document.We check the Backup status we have taken for the test environment from the Backup> Disk section on the left, the point we have to pay attention to in the Repository section is included in the 'Scale-out Backup Repository'.In the Home Menu, we enter the Backup> Infrastructure menu at the bottom left.We can view the size of our backup file that we have sent to the S3 Compatible Object Storage storage pool we haveadded in the Backup Repositories area.Part 2 - Restoring from S3 Compatible Object StorageWe will restore the backup that we sent to S3 as read-only using the Immutable feature to our environment, first we ent