Community

My little marketing moment for a Saturday Morning. “When you start out in your backup and restore career you are a newbie”“When you become an expert in the field you are a Veeambie”  cheers

At the last days I had an issue with job notifications not sent from the VBR Console after modifying the users and roles within the console.One of my clients demanded that the access to the VBR console has to be restricted to some explicitly defined backup Admins and no one else.So, I removed the local Administrators group from the list in the users and roles and added the personalized accounts of the backup admins.Fine, the backup admins can start the console and work with it, and all other accounts have no access…The next morning the admins told me that no job notifications were sent in the night. My first thought was that the colleagues responsible for the mail server and/or the firewalls had done some changes and now the backup server cannot reach the mail server. But after checking with them no changes were done and there were no dropped mails at the mail server. So, it seems that the VEEAM server did not send anything at all…I saw then that some mail from PowerShell scripts were

Borg and Kubernetes Since the CKA Kubernetes certification is a practical exam with no multiple-choice questions you must wait a day or two until you find out your result. I was on sitting on my back porch when I checked my email and saw the ‘Congratulations” in the title and I literally shouted, “I have Kubernetes!!”. My neighbor who is not IT savvy and witnessed my strange behavior immediately thereafter began doubling his social distancing measures with me. This was the “Covid19 summer” of 2020, and I realized that many people had no idea of what Kubernetes was and to be fair it does sound like something that you can catch.So, what is Kubernetes and why is it being talked about so much?To try and explain why this has become such a hot topic I like to think back to the virtualization revolution. It used to be that when a company wanted to add a new application server the process was a very long and labor intensive one. You had to order the physical server, then you had to rack it, ca

As we discussed here earlier, there are 3 transport modes to get data from vSphere for backup.These modes are also available for restore. By default, first mode (order: SAN, Hotadd, NBD) that meet requirements, is selected for restore. For SAN direct mode, a requirement is thick provisioned disk type. You can select each available type (thin, thick eager and lazy zeroed) in restore wizard.My recommendation: If you want to leverage SAN direct mode, choose Thick eager zeroed! This option is much faster than lazy zeroed!I tested these settings in different environments. For example, I saw differences of67 % (150MB/sec for eager vs. 100MB/sec for lazy), 93 % (226MB/sec for eager vs. 16MB/sec for lazy).   See here different wizardsVM restore VM Disk restore   Interesting LinksIn documentation of version 9.0, you see a hint, for lazy zeroed, vCenter is needed for zeroing.https://helpcenter.veeam.com/backup/vsphere/direct_san_access_writing.html Since v9.5 no difference is made anymore bet

Understanding Kubernetes Networking can be a challenge. A couple of years ago I was tasked to setup a distributed Minio instance running in containers for use with a Veeam SOBR S3 compatible capacity tier. At first, I thought about doing it on Kubernetes but very quickly realized that I was in over my head. I had no previous experience with Kubernetes and I could not just “wing it”. Among other things the networking piece I found especially hard to understand.In the end I created a Docker Swarm cluster which had a much easier almost “plug and play” overlay network and while that did the trick, I understood that simplicity also meant rigidity.Kubernetes follows the age old *nix (Unix, Linux BSDs and so on) philosophy of creating small separate entities that when brought together can scale into something very complex. Networking is no exception.While a Kubernetes cluster does come with some default networking called kubenet it is very limited and not meant for production environments fro

Morning!I know some people were disappointed at the restrictions of the last Veeam sweepstake being open only to US residents, well the new one is open to more countries now!——The Cisco Live Sweepstakes (“Sweepstakes”) is open to legal residents of Australia, Belarus, Belgium, Bulgaria, Canada, Chile, China, Costa Rica, Czech Republic, Denmark, Finland, France, Germany, Ireland, Japan, Malaysia, Netherlands, New Zealand, Norway, Paraguay, Peru, Romania, Slovakia, South Africa, Sweden, Switzerland, Taiwan, Thailand, Ukraine, United Kingdom, United States and the District of Columbia, who are 18 years of age or older at the time of entry and who are not excluded due to any of the reasons listed below.—— Register here!

It is new in v11, but I do not have much detailed information about it.When you create or edit a backup job, you can enable High priority.The idea is to use this option to make clear this is an important job. So it can be started before less important jobs are started. It is not about job performance, it is about start time. Makes perfect sense to me! Under certain circumstances this feature will make job scheduling easier.At first this seems to be available for Backup and Replication jobs.

Hi, Has any one had the below error on the new CDP Proxy function on B&R v11?Source Proxy Replicator error: encryption; Cannot decrypt message, possible due mismatching key.I can see that the disk are replicating, but now and then it shows the error? Note this is a new CDP job 

As some of you might already know, with V11 the creation process of GFS points within backup copy jobs will be completely renewed.As I understood it, the new method will be exactily the same then, as it is already for primary backups.So instead of forever forward merging and meanwhile somehow dropping a GFS point, we will see a forward chain with synthetic fulls. The latter will then be flagged with the GFS flags.This will in my opinion be remarkable for two reasons:We’ve seen problems with GFS backup copy jobs not adhering to the SOBR placement policy. During one support case I was driving we narrowed it down to the legacy way GFS points are generated in these jobs. SOBR placement policy disregarded for GFS - Veeam R&D Forums. So this might be solved then, which is great news. On the other hand this is also good news for the usage of dedupe appliances. Especially the ones with a landing zone like ExaGrid. Those currently suffer from the merging processes occuring in backup copies

v11 was officially Launched and GA’ed last week meaning customers could get their hands on the next flagship release of Veeam Backup & Replication. Since then we have already had about 15,000 downloads! This is why we offer our Cloud and Service Provider Partners an RTM build two weeks in advance of GA… So What’s in it for Service Providers?… a lot!https://anthonyspiteri.net/v11-veeam-service-provider/ 

 Hi Folks,I have written up some quick instructions on setting up Minikube a single node Kubernetes cluster on your laptop. If I have missed something or if anything is unclear please reach out to me. The great thing about Kubernetes is that you can take it anywhere. If just want to familiarize yourself with Kubernetes and do some testing, then Minikube is an easy to install nonproduction single node Kubernetes cluster that you can install on your laptop. I am using my windows 10 Lenovo Thinkpad. First, we need to enable the Hyper-V role (or install Oracle VirtualBox if your laptop OS will not run Hyper-V) on your laptop. Mac users can use brew https://gist.github.com/kevin-smets/b91a34cea662d0c523968472a81788f7 To enable the Hyper-V role, follow these instructions:https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v  INSTALL MINIKUBEMinikube is a single node Kubernetes cluster which allows you test Kubernetes.There are two ways to install Minik

Hi Everyone, I have just moved over to Kasten on loan from Veeam to really focus on the Technical Community and Content. I thought I would ask the Veeam community about your experiences so far into the learning journey of Kubernetes and Cloud Native technologies. I have been on this learning curve for the past 2 years and there is still quite a bit to tackle and as always in technology you can go as far and as wide on all areas of learning. I have started to document this for the blog my building out an environment in my home lab. I want to see how you are all navigating this? Any training methods you have found? Are your companies starting to or into the Kubernetes journey? and here is another one, how long before we see this trend become our normal, most likely alongside virtualisation which we all know and love today. Finally I would love to hear from you if you have Kubernetes or Kasten blog content because we want to share this as wide as possible.

I was thinking about building a lab at home to play, test and learn certain topics. But as my free time is very limited and I didn't want to ruin our power costs, I came to the idea to run a lab in the cloud.Advantages:low entry costs: you pay what you use/need flexible/scalable: resources are only a few clicks away ability to create different scenarios: offsite, DR, ... new technologies = more knowledgeDisadvantages:long term costs: as long as you're using/reserving resources you need to pay for themBeing a VMware guy I've looked for ways to deploy a vSphere environment or at least an ESXi host, but unfortunately the costs were much to high. Either I would have to go with VMware Cloud or rent a bare-metal machine to install ESXi myself; both are very costly.Hyper-V on the other side is easier to deploy in the cloud, without spending too much; as long as the base system support Nested Virtualization. So I've decided to give it a try and went with Microsoft Azure.Microsoft has published

CDP - Retention Policies A retention policy defines for how long Veeam Backup & Replication must store restore points for VM replicas. Veeam Backup & Replication offers two retention policy schemes:Long-term retention Short-term retentionLong-term RetentionVeeam Backup & Replication retains long-term restore points for the number of days specified in CDP policy settings. When the retention period is exceeded, Veeam Backup & Replication transforms the replication chain in the following way. The example shows how long-term retention works for a VM replica with one virtual disk.Veeam Backup & Replication checks whether the replication chain contains outdated long-term restore points. If an outdated restore point exists, Veeam Backup & Replication rebuilds the file that contains data for the base disk (<disk_name>-flat.vmdk) to include data of the file that contains data for the delta disk (<disk_name>-<index>.vmdk). To do that, Veeam Backup & 

Today I coming here for a simple post about compression Veeam B&R. So, I take a short VM Linux running an Active Directory for this.  Below you can see a full backup with a compression set up as Optional. And now you can see the same full backup with compression option on Extreme. How you can see the duration time was decrease in almost 20 minutes when I compress backup on extreme option. The target of backup on this example is an offsite repository. It has a low bandwidth if we compare with a local one. So, when we are planning our offsite backup policy,  the extreme compression can help to get better times on your backup execution window.   

Here is a case of sucess of Puma SE using Veeam. Let’s enjoy! 

Hello Veeam Community! For 2 days consecutive I receive this error below:This is a Linux VM as a file server running on ESXi enviroment. So, today, after I run this job mannualy I can see a health check on it. It lasted almost 40 minutes during the job. I don’t know what it exactly means. But now, everything is working properly! Did you already see or hear something like these?

During Microsoft Ignite participants of the Cloud Skills Challenge will receive a free exam voucher for certain cloud certifications.You can read the details here: https://csc.docs.microsoft.com/ignite/registration/March2021With the voucher one of the following exams can be booked:This exam offer is exam-specific and only redeemable for select Microsoft exams. Eligible exams include: AZ-104: Microsoft Azure Administrator DP-100: Designing and Implementing a Data Science Solution on Azure MS-700: Managing Microsoft Teams MS-100: Microsoft 365 Identity and Services MS-101: Microsoft 365 Mobility and Security DA-100: Analyzing Data with Microsoft Power BI SC-200: Microsoft Security Operations Analyst SC-300: Microsoft Identity and Access Administrator SC-400: Microsoft Information Protection Administrator  In order to participate you'll need to register for MS Ignite and complete on of the challenges. If you're not registered then visit this link: https://register.ignite.microsoft

If the answer is obvious and I don’t see it: sorry for my question!In a large customer setup, SureBackup is managed by script (cusomized: https://www.virtualtothecore.com/can-test-1000-vms-veeam-surebackup/). So VMs are dynamically added by a Application Group. For a long time, we put just one VM into the group. SureBackup jobs failed when this VM failed - most often because of timeout. Now we increased to two VMs per run. Now I see job is skipping second VM when first VM fails. My question: Is this a designed behavior with Application Groups? Did not find the answer in the helpcenter. 

Finally v11 is launched, but I will not stop to talk about small features and improvements For today, I found a modern (app) feature. It is about instant virtual disk recovery. Which is not new in v11, but it is new to restore a disk as a First Class Disk (FCD) in vSphere. A FCD - also called Improved Virtual Disk (IVD) - is a new disk type for modern - containerized - applications. It can be used in kubernetes environments, like VMware Tanzu, to provide persistent storage.More details about FCD you can find here:https://cormachogan.com/2018/11/21/a-primer-on-first-class-disks-improved-virtual-disks/ https://cormachogan.com/2020/01/14/first-class-disks-enhanced-virtual-disks-revisited/Idea for short: manage virtual disk easily even if it is not attached to a VM.With v11, a virtual disk can be instantly recovered as FCD. This also means, you do not have to attach the disk to a VM at restore time - this can be done afterwards! This is not possible when instant-recovery as "normal" VMDK! 

Hello everybody!I'd just like to know… What do you all think about this:   Almost 1 hour to backup a VM to a completely offsite reposittory.Obs.: It was across the Internet, not in some private network.

First time sharing, so feedback is much appreciated, but please excuse my code if it’s not up to par with those who have a lot more experience with Powershell than I. I recently had a client who -- for legal purposes -- needed to restore the same folder from two month’s worth of backups. Running 61 File Level Restores in the GUI seemed like a nightmare, so he opened a case asking if there was an easier way. Unfortunately, through the GUI there’s really not an easier way, but this sounded like a perfect scenario for leveraging some Veeam PowerShell cmdlets. I soon discovered that the FLR cmdlets don’t have functionality that supports a ‘Copy To’ feature like you’d get in the GUI, so I had to leverage what Veeam cmdlets we do have and then add in some good old basic PowerShell commands to then pull the data from the mount point (C:\VeeamFLR\ by default) and move it to the target, then loop through n-number of times based on the user input.Here’s what I came up with. I’m still working on