Discussion Boards

Following on from my previous post, I am now in a pickle because after uninstalling a failed install of VBR 12.3 and reinstalling 12.1 the system is incapable of backing up my VMs. Need to completely uninstall all 12.1 stuff and do a clean install and forget about importing the config. Stay tuned.

Hello,When we have rental license how we can calculate how many VM can be protected by the available license?  

Someone on the Community reported the error of this post - “All backup proxies are offline or outdated” here -https://community.veeam.com/topic/show?tid=6645&fid=66I ran in to this issue in my HomeLab and opened a ticket with Veeam Support about it.  I was able to figure out the issue myself and wanted to post the fix steps here so that if you run in to this issue you can take the steps needed to address it yourself.This error does not seem to report anything in the log files which was the first thing I checked.  So, the steps to fix it are as follows -Remove the Proxy from the Veeam console using Delete. Remove the server from Managed Servers section - this will uninstall the components from the server. Log in to the Proxy server to ensure all components for Veeam are gone - if not remo

Hi everyone, I have again encountered a problem related to backup using veeam backup, the error message is below.“Processing VM Linux Error: An error occurred while saving the snapshot: Too many levels of redo logs. (An error occurred while saving the snapshot: Too many levels of redo logs., An error occurred while taking a snapshot: Too many levels of redo logs.)Failed to create VM snapshot. Error: CreateSnapshot failed, vmRef 11, timeout 1800000, snName VEEAM BACKUP TEMPORARY SNAPSHOT, snDescription Please do not delete this snapshot. It is being used by Veeam Backup., memory False, quiesce FalseError: An error occurred while saving the snapshot: Too many levels of redo logs. (An error occurred while saving the snapshot: Too many levels of redo logs., An error occurred while taking a snapshot: Too many levels of redo logs.)” Detail diskVM Disk : 1 TBDatastore Free : 300 GB I really appreciate the advice given..

Dears, Greetings,I got an issue in my server as i am adding the machines as physical infrastructure.the issue is the job stuck at phase of storage initialized  then it fails after a while for windows with given error: and for linux machine it fails quickly with error  the thing is the network is fine and the connection to the NAS storage also so could you please help me in this error?Thanks,

Dear All,Let me ask for advice regarding the significant difference between the backup size and the repository size, which is causing inefficient storage usage and making it seem like deletions are not working properly. Below is my configuration: Source Backup: vMWare vCenter Destination Repository: Cloudian Object Storage Backup Frequency: Once per day Full Backup: Once per week Rettention: 7 Days Immutability: 5 days + 0 days (I modified the registry to set block generation to 0 days Capture:Rettention Policy (Job Configuration)Immutability (Repository Con

 I currently have three separate data centers (DCs), each with its own Linux Proxy Server and Backup Repository. A single Veeam Backup & Replication (B&R) server, located in a fourth data center, manages all backup jobs across the three DCs.If this central Veeam B&R server becomes unavailable, all backup jobs across the environment would fail. To eliminate this single point of failure, I’m planning to deploy a dedicated Veeam B&R server in each data center. This way, each site will operate independently with its own Veeam B&R Server, Linux Proxy, and Backup Repository.  What is the recommended approach for implementing this setup? Will additional Veeam licenses be required for running multiple B&R servers? Once implemented, how can I migrate existing backup jobs and managed hosts from the central Veeam server to the new local Veeam servers in each data center?

My HelpDesk staff is in charge of removing tapes from our library. I have a Powershell script that emails them the tapes to be removed. They don’t have the Veeam B&R Console installed on their workstations. But they do have access to Enterprise Manager, from a web browser. Is there a way to export tapes from Enterprise Manager? I don’t see one. And since this is all they do with Veeam, installing the whole console is kind of overkill for them. Right now, they’re logging directly onto the B&R server itself, to do this. And I’d really like them to not log onto a server directly.

The install drive for Veeam B&R has 7.3 GB free space and there is nothing left that I can do to recover or extend the partition. I was wondering if I uninstall 12.1 would there be enough disk space to then install 12.3? I am running Community edition.

My understanding it that the best practice is to run Veeam B&R on a stand alone server, not domain joined.  It should have rdp disabled.  Veeam console should be installed on another server.  Our B&R server is domain joined.  I haven’t found any documentation on doing this type of migration.  The processes run under the local system account.  The credentials for things like vmware and storage arrays are stored in Veeam.  What am I missing that would blow up when doing this migration?  I would like to move it to a new server, not just remove the current one from the domain.  Our repository servers are windows and domain joined as well.  Should they be removed from the domain?  Seems like yes and that might be biggest issue.  Any insights appreciated.  

Hi Community,I am studying a vSphere v8 course and in one of the course topics, I came across some information that raised a doubt in my mind. The information is as follows: In order for hotadd mode to occur, the proxy server must be running on the same ESXi host that the VM is running on. After researching further, I found this document https://techdocs.broadcom.com/us/en/vmware-cis/vsphere/vsphere-sdks-tools/8-0/virtual-disk-development-kit-programming-guide/virtual-disk-interfaces/virtual-disk-transport-methods/hotadd-transport.html that, in my interpretation,

I’m using Veeam Backup & Replication 12.3 integrated with a virtual infrastructure running on Nutanix AHV 6. I have a backup job configured with Application-Aware Processing enabled to back up a SQL Server instance hosted on a VM named SRV_GESTAOX. However, when running the job, I receive the following error:17/04/2025 17:09:22 :: SRV_GESTAOX : Object reference not set to an instance of an object.  17/04/2025 17:09:23 :: Job finished with error at 4/17/2025 5:09:23 PMAs part of the troubleshooting process, I’ve already tried using the local Administrator account and tested credentials using the format hostname\username. The credentials test in the Veeam job configuration passes successfully, so authentication doesn’t seem to be the issue.What could be causing this .NET-style error, and what steps would you recommend to further troubleshoot or fix the problem?

Copy job finished with an error - Failed to perform patch of the full backup. Any reason for this?

  Hi folks,I hope you are well, for the lucky ones enjoy the VeeamON.I am performing restoration tests with Veeam from a Data Domain to an Hyper-V environment in order to take advantage of Veeam's acceleration mechanisms I am using the Entire VM restoration method.But I have a doubt how Veeam process the restore when a VM have multiple disks attached. I have read the documentation:https://helpcenter.veeam.com/docs/backup/hyperv/dell_dd_accelerated_restore.html?ver=120On the schema is mentionned Parallel disk restore.In the explanation :3. Every VM disk is processed in a separate task. For each task, Veeam Backup & Replication starts one Veeam Data Mover on the backup proxy. Additionaly, Veeam Backup & Replication starts Data Mover on the gateway server,

Hello everyoneI have been trying to use the lab that Veeam provides for free for a few days now, but every time I request it, no link is sent to my email so that I can enter the lab. Does anyone know what the problem is?I am requesting a laboratory through the link below.https://go.veeam.com/hands-on-lab-experience

Hello,i would like to ask, if anybody has experience, if there is different between selection of proxy server per job or per repository.Is there different between priority or some deep thing?i am just thinking, if its better to use selection of proxy per job A (same proxies for all jobs on side A) or only select proxies in affinity per repo/extent for side A?thank you  

We are trying to restore a VM onto our storage, at 99% the following error appears: Failed to update VM configuration Restore job failed Error: Failed to get planned VM (ID: 8e92ff70-b052-48f4-82a0-fd......

I currently have a VBR v12 server running as an ESXI VM. Looking to move it off VMware to new hardware. Was thinking the easiest way might be to setup the new server as a Hyper-V host and then use the converters available (starwinds etc) to make it into a Hyper-V VM. Thoughts? 

I’m installing a new Veeam solution with Hyper-V. I’m not sure which proxy is best. on-host or off-host. Does anyone have any experiences?thanks

M365 Backup - What is the normal throughputI have a small mailbox backup job running at the moment, 200 users, but the plan is to expand this to 2500 users.But I only have a throughput around 15-20 MB/s. EWS throttling is disabled.Is this normal, please let me know what transfer speed you have?

Dears:I have a question about how to implement: We want to separate network backup traffic and backup traffic for backup repository server.For example, we will set one IP: 1.0.0.1 on backup repository server with DNS host name to handle all backup traffic. At the same time, we want to use another IP: 2.0.0.1 on backup repository server to replicate data to the secondary repository server using backup copy.Any ideas how to implement?Thank you very much!

New release of AsBuiltReport.Veeam.VBR 😁Sample report: Link## [0.8.17] - 2025-04-18### Added- Add Backup Infrastructure diagram to the main report### Changed- Increase Diagrammer.Core minimum requirement to v0.2.24- Increase Veeam.Diagrammer minimum requirement to v0.6.24- Increase AsBuiltReport.Core to v1.4.3- Introduce Get-AbrVbrDiagrammer function for improved diagram handling- Refactor Invoke-AsBuiltReport.Veeam.VBR to utilize new Get-AbrVbrDiagrammer function- Enable diagram gener

With Veeam v13, will this allow us to migrate from our Veeam Windows-based environment (B&R manager, proxy, gateway, repository, etc...) to a Veeam Linux-based environment, if this migration process takes several months? 

I have single backup job contains 5 VMs, one of VM let say VM3 have big size (around 10TB).It’s possible to move out the VM3 from existing job and create a separate job for this VM without doing the initial backup (by use existing backup chain on prev job)?