Discussion Boards

Hello everyone,We plan to backup an exchange dag 2016 in close future, this dag is not small (400tb). We face many technical challenges:Load to respect backup window Storage capacity long term retentionsWhat storage are you using for the first tier? I’m covinced the airgap should be tape storage due to ransonware/rampage protection and large storage capacity of lto9.I’m curious to have a review about the exchange backup challenge Disclairmer: i’m not an exchange expert 

I haven't seen an announcement here, so… Today's a CrowdChat about v11: What's new in Veeam V11?Participants are among others @vNote42 @MicoolPaul @michaelcade @Chan Ekanayake @jorge.delacruz https://www.crowdchat.net/veeamv11  

Veeam Backup & Recovery 9.5 (VMWare)When setting up my Backup Jobs. “I Enable backup file encryption.” If I am correct this would mean that the file is “Encrypted at Rest” on the backup disk.After 30 days I move this to a Amazon S3 Bucket. I have set up the Capacity Tier to “Encrypt data uploaded to object storage”. Is the Backup “Encrypted at Rest” in the S3 Bucket or do I need to turn on disk Encryption in Amazon?Is there some documentation that explains the above scenario?

How can I perform backup verifcation or sure backup in our NSX-T environment? We need to perform restore test regulary. So what kind of options do we have?Heartbeat test would be ok. 

I recently posted a blog about my book in publication and you can order it now.  Please check it out and if you want a great resource it is well worth it. There are reviews being posted as well to check out.https://just-virtualization.tech/mastering-veeam-backup-replication-10-published/

My little marketing moment for a Saturday Morning. “When you start out in your backup and restore career you are a newbie”“When you become an expert in the field you are a Veeambie”  cheers

Morning!I know some people were disappointed at the restrictions of the last Veeam sweepstake being open only to US residents, well the new one is open to more countries now!——The Cisco Live Sweepstakes (“Sweepstakes”) is open to legal residents of Australia, Belarus, Belgium, Bulgaria, Canada, Chile, China, Costa Rica, Czech Republic, Denmark, Finland, France, Germany, Ireland, Japan, Malaysia, Netherlands, New Zealand, Norway, Paraguay, Peru, Romania, Slovakia, South Africa, Sweden, Switzerland, Taiwan, Thailand, Ukraine, United Kingdom, United States and the District of Columbia, who are 18 years of age or older at the time of entry and who are not excluded due to any of the reasons listed below.—— Register here!

Hi, Has any one had the below error on the new CDP Proxy function on B&R v11?Source Proxy Replicator error: encryption; Cannot decrypt message, possible due mismatching key.I can see that the disk are replicating, but now and then it shows the error? Note this is a new CDP job 

As some of you might already know, with V11 the creation process of GFS points within backup copy jobs will be completely renewed.As I understood it, the new method will be exactily the same then, as it is already for primary backups.So instead of forever forward merging and meanwhile somehow dropping a GFS point, we will see a forward chain with synthetic fulls. The latter will then be flagged with the GFS flags.This will in my opinion be remarkable for two reasons:We’ve seen problems with GFS backup copy jobs not adhering to the SOBR placement policy. During one support case I was driving we narrowed it down to the legacy way GFS points are generated in these jobs. SOBR placement policy disregarded for GFS - Veeam R&D Forums. So this might be solved then, which is great news. On the other hand this is also good news for the usage of dedupe appliances. Especially the ones with a landing zone like ExaGrid. Those currently suffer from the merging processes occuring in backup copies

v11 was officially Launched and GA’ed last week meaning customers could get their hands on the next flagship release of Veeam Backup & Replication. Since then we have already had about 15,000 downloads! This is why we offer our Cloud and Service Provider Partners an RTM build two weeks in advance of GA… So What’s in it for Service Providers?… a lot!https://anthonyspiteri.net/v11-veeam-service-provider/ 

Hi Everyone, I have just moved over to Kasten on loan from Veeam to really focus on the Technical Community and Content. I thought I would ask the Veeam community about your experiences so far into the learning journey of Kubernetes and Cloud Native technologies. I have been on this learning curve for the past 2 years and there is still quite a bit to tackle and as always in technology you can go as far and as wide on all areas of learning. I have started to document this for the blog my building out an environment in my home lab. I want to see how you are all navigating this? Any training methods you have found? Are your companies starting to or into the Kubernetes journey? and here is another one, how long before we see this trend become our normal, most likely alongside virtualisation which we all know and love today. Finally I would love to hear from you if you have Kubernetes or Kasten blog content because we want to share this as wide as possible.

Here is a case of sucess of Puma SE using Veeam. Let’s enjoy! 

Hello Veeam Community! For 2 days consecutive I receive this error below:This is a Linux VM as a file server running on ESXi enviroment. So, today, after I run this job mannualy I can see a health check on it. It lasted almost 40 minutes during the job. I don’t know what it exactly means. But now, everything is working properly! Did you already see or hear something like these?

During Microsoft Ignite participants of the Cloud Skills Challenge will receive a free exam voucher for certain cloud certifications.You can read the details here: https://csc.docs.microsoft.com/ignite/registration/March2021With the voucher one of the following exams can be booked:This exam offer is exam-specific and only redeemable for select Microsoft exams. Eligible exams include: AZ-104: Microsoft Azure Administrator DP-100: Designing and Implementing a Data Science Solution on Azure MS-700: Managing Microsoft Teams MS-100: Microsoft 365 Identity and Services MS-101: Microsoft 365 Mobility and Security DA-100: Analyzing Data with Microsoft Power BI SC-200: Microsoft Security Operations Analyst SC-300: Microsoft Identity and Access Administrator SC-400: Microsoft Information Protection Administrator  In order to participate you'll need to register for MS Ignite and complete on of the challenges. If you're not registered then visit this link: https://register.ignite.microsoft

If the answer is obvious and I don’t see it: sorry for my question!In a large customer setup, SureBackup is managed by script (cusomized: https://www.virtualtothecore.com/can-test-1000-vms-veeam-surebackup/). So VMs are dynamically added by a Application Group. For a long time, we put just one VM into the group. SureBackup jobs failed when this VM failed - most often because of timeout. Now we increased to two VMs per run. Now I see job is skipping second VM when first VM fails. My question: Is this a designed behavior with Application Groups? Did not find the answer in the helpcenter. 

Hello everybody!I'd just like to know… What do you all think about this:   Almost 1 hour to backup a VM to a completely offsite reposittory.Obs.: It was across the Internet, not in some private network.

Hello All...We are moving from one Veeam Cloud Connect Partner to another.  We have already finished the migration.  We have disabled all of the Backup Copy jobs to the old partner and are ready to sever our relationship.  However, we want to make sure that the VCC Partner does not have access to the remote repos.  We do not suspect they will do anything but we just want to cover our bases.  I know when a backup copy job is created there is a setting to “Allow Veeam Cloud connect partner to manage this repo”.  Is it a simple matter of unchecking that box to prevent access?  Or should we completely delete the VCC partner from the service provider window?  We would like to avoid deleting them for a week or so since we still do not have 7 days of retention with the new provide so we want to option to get to that data if needed over the next week or so.  So will unchecking allowing them to have access achieve what we want?ThanksDave

Hi, greeting from newbie last month, our neighboring company was attacked by ransomware,it become worst because their datastore is encrypted too, they still use vmware 5.5 from investigation, they analyze that one server made network drives directly to the datastore,that's why ransomware is able to attack and encrypted the datastore. i want to know if it is possible to create a network drive directly? if attack the datastore is possible, I think veeam replicated server will be useless.

 Are you tired of typing kubectl over and over again?Hi Folks,If any of you are planning on taking the CKA or CKAD certification exams bear in mind that effective use of your time is very important for passing because they are both hands on practical exams with no multiple choice questions. I completed the last question of the CKA in the final minute of the exam!You can save a lot of time by creating aliases. So instead of having to type constantly kubectl you can create an alias k and type this instead. It is up to you how many you want to create during the exam but for daily work life these aliases are also huge time savers.Ahmet Alp Balkan has a great script to create many aliases for your home labs or work. If you are like me can just pick and choose a few and create them. https://github.com/ahmetb/kubectl-aliasesHere is a simple example to create a k alias for kubectl:open the .bashrc file in your home directory with your favourite editor Type in the alias (I normally put mine rig

Well if you applied to the Veeam Vanguard Class of 2021 here - Veeam Blog - Get ready for 2021 Vanguard class! you should be receiving your email today.I am happy to have been accepted for a 4th year now into such an amazing program.  Here is to all those renewed and new Vanguards.

Morning guys, Just noticed that Veeam have updated their help center documentation ready for the release later today.Veeam Technical Documentation Check it out to learn all about the new features :)

Hello All,If you missing the Veeam v11 launch event today, the official link is here, and register to watch,What’s new in Veeam Backup & Replication v11And the additional information is attached following link.Here is Veeam v11 resources URL, Veeam has updated their help center documentation, Download Veeam Products, and version comparison ready for the release today.Veeam v11 sharingCheck it out and learning all veeam v11 new features  

I’m sorry, no v11 content here…I wanted to share this video on v10 which I’ve found in the Veeam channel; although it’s almost a year old I hadn’t seen it before. After viewing this video, the question is: Will v11 be even better?

Afternoon! I raised a case with Veeam about the RTM that I don’t believe has made it into the GA in time so thought I’d mention here.Scenario:Latest Veeam v10a in a distributed deployment, with dedicated roles to each server. Attempting to upgrade to v11.Issue:When upgrading Enterprise Manager to v11 when it is the sole Veeam product installed, the main setup executable from the v11 ISO will incorrectly report that only v9.5u4b and above are supported for upgrading to v11.Workaround:After a discussion with Veeam support this is purely an issue with the main setup launcher reading an old attribute (this wasn’t elaborated on further). It is still supported to browse to the Enterprise Manager section of the ISO and run the installer from there. It will detect it is a supported upgrade path and install as expected.

Will The New Version Of “V11 Backup And Replication Community Edition” Be Released This Week?