Community

As part of my virtual VMUG tour, I submitted a session to the VMUG call for papers covering the subject of Data Protection for Tanzu Kubernetes workloads. (Most of this will apply for any Kubernetes environments).This was picked up by Erik at the Belgium VMUG for their UserCon in June 2021. After the session the videos remain available on demand for a short time, but there were no plans to upload this for everyone. So thank you to Michael Cade, whom offered to host this session for all on the Cloud Native Data Management – YouTube Channel.In the below session I cover the following areas;​What kind of data protection do you need? ​Velero

I had the pleasure of presenting this Kubernetes 101 session to the Veeam Community thanks to my work as part of their Veeam Vanguards program, and a special thank you to Michael Cade who co-presented with me!In this session we cover the following with technical details included:How have we got here? Kubernetes – The Building Blocks Policies Wrap-up I’ve also a number of Kubernetes related content on my blog. And I’m slowly completing

If you missed the first part of this 3-part series, you can read it here. In this post, I’ll be discussing the Backup Copy Job Short-Term Retention Policy. The main purpose of Short-Term Retention is to create additional copies of your Backups, whether on- or off-site, meeting at least the “3” part of the “3-2-1 Rule”.In previous Veeam versions, the Short-Term Retention Policy was referred to as the Simple Retention Policy. As with previous Veeam versions, the Short-Term Policy will retain using the Forever Forward Incremental method to copy the data to target, as long as Long-Term Retention (GFS) Policy is not enabled. What this means is this: during the initial run of the Copy job, a Full backup restore point (.vbk ) will be created, either 1 file

Hi All, hope you enjoyed VeeamON 2021 as much as we did! That is why we added not 1 or 2 but even 4 new bonus sessions to the VeeamON 2021 catalog! NAS Backup — Under the Hood Strategy Session — Native Public Cloud Backup and Recovery Beating Ransomware With Veeam — The Rest of the Story! Strategy Session — Microsoft Office 365 Data ProtectionLogin to the VeeamON website and enjoy! Please let us know in this thread what you think about the particular sessions.  

One thing that I find really useful if you’re moving a small VM for a small customer that doesn’t have a VCenter to a new Vsphere host is to just simply connect the the two ESXi hosts in Veeam:Add both hosts in the Virtual Infrastructure Create a replication job between the old host and the new host If it runs rather slow let it run for a few days.  Determine a small outage window where you’ll have the customer stop accessing data on the old host.  Do one more replication job. Shut the old VM down in the old host Power on the new server on the new host.It’s important to not use the replica_ prefix or suffix just for the sake of simplicity. A lot of times focus is on larger customers and how to vmotion this or that but sometimes it’s nice to think about how small customers can be served too.  Using Veeam for that is a life saver.

Hi All , Hope great.I was practicing some fail-overs last night to our DR. If I am correct it seams that after you fail over the original VM from Prod it does not shutdown. This leaving two machines on the network with the same IP.Very keen to hear your thoughts. Being Prod and DRSincerelyJay

Experience Microsoft and Veeam solutions at Microsoft Inspire 2021, including BaaS & DRaaS in Azure, Microsoft Office 365 backup to Azure and more.Join and grab a free t-shirt https://www.veeam.com/microsoft-inspire-2021.html 

What do you guys think of installing ubuntu server as  a VM on Qnap 8Bay - Raid 10 NAS.Then pushing Immutable backups to it. The NAS will not be connected to the internet.I would love to learn the possible risks and vulnerabilities of this?We still follow the 3:2:1 rule. This is just for extra.Thanks all.Jay 

Hi, everyone! I have a quick question about coypjob intervals. If I have my copyjob set to 1 day starting at 4am, does that mean that the copy starts at 4am and runs until 4am the next day and then just starts over? I am seeing some warnings about things not being copied over in the copy interval. I’m a little confused on how this works. How can I make the copy interval longer?

Hello everyone, I need to restore “incremental backup” to another “new server” on the network.I have “export disk” to VHD from backup the “old server” and attach this disk to “new server”.In this moment I need to restore “incremental backup” to “new server”. Is this possible? Thank you

Hi All - Hope well.I was hoping some one could shed some light on this. It seams when I replicate VM’s from our production server to the DR server, hyper V also makes a snap shot.What is the correct way to start the replicas? I imagine just for the replication job to stop and then start the VM’s normally on Hyper V without using Hyper V snapshots?What is the correct procedure? - I would also like to use the fail-back option so I dont want to hyperV snap shots to upset the process. Please find the image attached. Thanks all! 

Hi all,As a Veeam partner I often get the question from customers and colleagues : why choose VBO365 and not one of the so many SaaS competitors?That question is not so easy to answer, but there are a lot of reasons.I’ll try to give some reasons why I find that VBO365 has advantages relative to other SaaS competitors. Flexible : You can install VBO365 on a VM or physical server on-premises.You can use regular storage or an object-storage appliance.Also you can install it on a VM in the public cloud and using object storage as the best choice (costs and quantity of storage). Proximity : Because you can install it on-premises or as a partner on your own hardware in a datacenter, you can deliver proximity instead of used storage of a competitor in a region far away from your location.

I have a server with Direct attached storage utilized as a repository server. We have 3 partitions that are each configured as a repository in Veeam. We have combined all 3 into a SOBR. For the max concurrent tasks, do I need to divide the total concurrent tasks by the number of repositories since they each could be utilized at the same time.Hard Numbers: I have 16 concurrent tasks max due to Ram limitations on my Repository server. With the 3 repositories, do I configure each to have 5 max concurrent tasks or can i configure all 3 to have 16?Explanation on the reason for the solution would also be greatly appreciated. Thanks in advance

I am testing some VM backups in a customer environment.  We get the following warning when running the backup of a test VM:6/22/2021 8:18:11 AM :: SetVmCustomConfigOption failed, vmRef 'vm-117256', options ['SCSI0:0.ctkEnabled':'True','SCSI0:1.ctkEnabled':'True']Fault "NoPermissionFault", detail "<NoPermissionFault xmlns="urn:vim25" xsi:type="NoPermission" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><object type="VirtualMachine">vm-117256</object><privilegeId>VirtualMachine.Config.AdvancedConfig</privilegeId></NoPermissionFault>"Permission to perform this operation was denied.The backup appears to completed successfully with this warning on the VM.   Any thoughts on the reason for this warning?  Running Veeam 11.0.0.837.  Vcenter version is 7.0.2.00200

Hi All. Hope you great. I most likely corrupted my veeam DB after upgrade. Even after repository re-scan my Veeam B&R is upset with my default repository. I recall there was a regedit command to force veeam to rebuild its DB. If anyone can help I will really appreciate it. Here is the error as attached.I would love to solve this. If anyone can assist. 

Happy Monday! I’ll try and post a little pop quiz question each day, hope to hear from many of you. Did you know the answer? Did you look it up in the documentation? Did you try it in a lab? Please share some details along with your answer.The virtualization team uses vSAN for all datastores and is considering to enable vSAN datastore encryption. What impact would this have to the Veeam deployment?

 when I try to install Management pack it showing this error. but I try to install in the management pack in the same server where I install windows system center    

Hi All,I am very new to Both Veeam and Object Storage.I have created a container in Vultr and I can connect to it with Cyberduck with no issues.When I go to set it up in Veeam I am asked for the Region which i am not asked this in Cyberduck and so I am not 100% sure what to enter here.Does anyone have any clue as to what this might be? Server Endpoint: ewr1.vultrobjects.comRegion as far as I can see is: New JerseyAnyone wanting to have a go please treat yourself to $100 credit with Vultr by using my referral code:https://www.vultr.com/?ref=8896724-6GCheers, Aaron.

Hi all has someone experience on this environment? if it were on Linux there would be no problems using the agent….. but on Windows? Thanks 

Hi,I am looking for the NetApp Ontap versions supported by Veeam VBR V11.In the V11 release notes Ontap version 9.8 is mentioned as supported as the newest version. But what is the oldest supported version? I am not able to find it at the moment…   it is too warm probably….Does anyone in community know this?

Hi all,This week no top-10 or top-15 or a best practice from me, but a poll this time ;-)Since object-storage is more and more interesting for putting backups onto, I want to implement object-storage appliances using SOBR capacity tier at our biggest customers and also on our VCC infrastructure. This especially for having an airgapped/immutable copy of the primary backups.Requirements it must meet, are : it has to be IMMUTABLE object-strorage, so implementing the object-lock functionality it needs to be VEEAM READY (must be on the list Veeam Alliance Partner Technical Programs) it has to be an appliance (so no need to use Linux CLI, but just a user-friendly web-interface, an all-in-one box, all included) easy scalable cost-effective

Hello everybody! Just some question…What is the most interesting reports that you consider on your Veeam One environment?

Do you use the VEEAM RMAN Pluin in your environments?What are your experiences with it?Do you have one or more than one Oracle database instances on a system?