Community

Morning all,Am getting this error when trying to push agent to win svr 2012 r2 :Error 1920. Service <display_name> (<service_name>) failed to start. Verify that you have sufficient privileges to start system services.I have tried the solutions given in KB1059 but still fails, anyone with idea how to solve this? Regards,

Hi,Do you know how to move (change) default repository ?I have 3 repositroy working, but the HD where is my default repository is full.Thank for your help.RegardsOsifem      

Hello,I’m trying to restore a Veeam backup from Capacity tier (S3) into an EC2 instance in AWS.However, I’m facing a problem with the proxy instance. Once I start the restore process, the proxy instance is created, but after abou a minute I get an error:“Preparing proxy appliance VM Error: The destination would not be a correct SSH server.”I tried ssh to the proxy, but the connection gets rejected, while connections to other hosts in the same subnet with the same security groups are successful.So I manually created an instance using the same settings Veeam uses for the proxy, same subnet, security groups, AMI, and found that connections are successful, but only a few minutes after instance creation with that particular AMI Veeam chooses for the proxy instance (aws-parallelcluster-3.1.4-ubuntu-2004-lts).Now, the question is, is there a way to configure the AMI, the timeout or the number of SSH retries for the proxy appliance?Thanks!!!

<#.SynopsisTo be used after running the iland-kb3067.ps1 to verify that all data has been evacuated from the source repository. As logging is done by user it can be hard to ensure all data has moved from the Data Management job session logs..NotesVersion: 1.0Author: Jim Jones, @k00laidITModified Date: 5/23/2022.EXAMPLE.\kb3067-validation.ps1#>Import-Module Veeam.Archiver.PowerShell#Organization selection$orgs=Get-vboorganization | Sort-Object Namefor($i=0; $i -lt $orgs.count; $i++){write-host $i. $orgs[$i].name}$organisationNum = Read-Host "Enter organisation number"$vboOrg = $orgs[$organisationNum]$orgjobs = $vboOrg | get-vbojob[System.Collections.ArrayList]$orgrepos = @()foreach ($orgjob in $orgjobs) { $repo = $orgjob.repository $output = [PSCustomObject]@{ repoName = $repo } $orgrepos += $output }#Source Repository selection$sourcerepo = $orgrepos#$sourcerepo=Get-VBORepository | Sort-Object Namefor($i=0; $i -lt $sourcerepo.co

I’m looking at my Veeam B&R and all of my VMs show backed up and they even show restore points.  You can see from the attached pic that my VM has 10 restore points.  I’ve even done a restore from one of the restore points and it is in fact the VM from 5 days ago. Now, in Veeam ONE, when I look at my protected VMs report, I see zero VMs as protected no matter what time frame I select.  My “other” reports that I run look accurate, but my protected VM report literally shows all of my VMs as unprotected, meaning no backups or no restore points for the RPO.  It sure seems like I’m missing something.  Only just now looking at reporting so hoping for some guidance here. Thank you 

Can’t find an exact answer to this scenario. Is it possible to run a Linux vm (Ubuntu) on a synology (via VMM), and expose (or give access to) the underlying storage to the vm so that we can use the immutable feature?example:1: 40tb storage in one volume2: ubuntu vm having access to that storage somehow (I’m unfamiliar with vms aim synology)3: somehow configuring the veeam server to point to the Ubuntu vm storage so that it can use immutability 

Who else took the LabWarz challenge? Here is my score :-)What did you score?Outside the score, I found he challenge very informative. A quick way to learn!  

Hi everyone, Did you know it’s possible to access the full desktop editor from a mobile device? I don’t know why all the options are hidden by default but it’s really easy to get them back. All you need to do is change your zoom settings on your web browser. I’ve only tested this in iOS but check my GIF below and you’ll see all the cool options appear when I hit 50% zoom.Want to return to the mobile optimised editor? Just increase your zoom level back to default and everything will return to normal! You can do this dynamically whilst making your post, no need to refresh the page each time!

Design question, how to not overload the firewall.Customer has a physical B&R server on LAN1, and a physical Linux Hardened Repo on LAN1.They also have like 100 Physical servers on LAN2, 3 and 4.Traffic goes through the firewall obviously, and the fear is that it will overload it, affecting production.Since we can’t use Proxy Servers for Agent backups (no such thing apparently), how can I avoid pulling the traffic through the Firewall?The B&R Server and LHR are 10Gbit and use tagged VLANs, so I can quite simply add VLAN2,3,4 to the VLAN trunk and give them a link into the Agent VLANs. Will that work? Do I need to add both the B&R server and the LHR, or just the LHR? Can an LHR have several IP’s like that and still work?  Will the traffic go from the agent directly to the LHR or via the B&R server?Other ideas welcome...Thanks!

Hey guys,Apart from checking the logs in program data folder, are there any other methods in veeam to get restore logs ?

Hi, Microsoft have a service alert for SharePoint Online. If you’re doing everything right, odds are you’re using modern auth for your Microsoft 365 backups, in which case, you’re using the Graph API. In this scenario, you may find you’re getting “Access Denied” errors in your backups, or even in your BAU processes. If so you want to check out SP381039. The latest information is some authentication components are missing for certain environments causing the failure. Microsoft are redeploying these components, no ETA as yet. Full output here:—-Published Time: 17/05/2022 16:40:16Title: Users may see 'Access Denied' errors when using Graph APIs for SharePoint OnlineUser Impact: Users may see 'Access Denied' errors when using Graph APIs for SharePoint Online.Current status: We've confirmed that a recent feature deployment misconfiguration has prevented components associated with the authentication feature from being available in a group of customer environments, which is producing 'Access

Hi everyone, Happy Friday!This is it, the final countdown to VeeamON 2022. So why not have some fun in the photobooth! If you haven’t seen it yet, Veeam’s VeeamON photobooth is live!This year you can take stills, GIFs, bursts & Video. Share your crazy creations below! Link: Photo Booth – VeeamON 2022See you at VeeamON! 

Hey guys,I have a clarification on veeam cloud connect terms. Is cloud connect the service provider ? why do you need cloud connect when we can backup and store workloads in cloud?

  Today Veeam have launched the new Veeam Backup for Office Microsoft 365 v6! That’s right, it’s had a slight name change to align with Microsoft’s rebrand of Office 365 to Microsoft 365. Excited and want to check it out? Download it here. Veeam have also updated their Helpcenter ready to explain all the new features. As always, Veeam have accompanied this release with a set of release notes, available here.In this blog post I’ll be going over the key new features and also any key insights to be aware of as part of deploying Veeam Backup for Microsoft 365 v6 or upgrading to v6 from an earlier version. Key Information Veeam Backup for Microsoft 365 Server:Straight away, I want to highlight that the CPU requirements have changed. Veeam are now recommending 8 cores as the minimum for v6, up from 4 cores in v5.It’s the same story for RAM, v6 now requires 16GB as a minimum, up from 8GB. There is a discrepancy between the release notes and the Helpcenter documentation with regards to VMs wit

Looking for something that should be all over the place on a community support forum (based on 30+ years of working in this industry), and not finding it on this site -- namely, where is there a good-quality support forum for basic setup and troubleshooting issues?  Specifically backup for Office 365 v5. Don’t want to get into a long description of the issue(s), ‘cause this doesn’t look like the place.  Also -- search  functions?

One of my clients uses Veeam B&R for backing up 43 VMs.  It’s working great. Now I’m being asked for a report on each VM, how often it’s backed up, how many restore points are kept and for how long we keep the backup of the VM. As I am new to ONE reporting, I’m hoping someone here can tell me what report I need from the canned reports or whether or not I need to create a custom report, and maybe how. Thank you! NVM...I figured it out.  Pretty sweet reporting tools in ONE.

This week at VeeamON we will get a lot of information about VBR’s v12 new capabilities to use Object Storage as primary backup target. For many customers this is most often the use case of Object Storage: Backup. But not all are of this opinion of course! For example VMware vSAN is an Object Storage. Also MinIO says it is primary storage. I would be interested what the community thinks of this? Is Object Storage ready for primary storage? What are your experiences with it?

Thanks for everyone that took part in the polls in my Fun Friday lead up. Huge amount of excitement from the community to see what’s going on with Veeam Backup & Replication v12, in particular in the service provider and object storage spaces, as determined by you, the voters! Poll Results Below:If you haven’t already, don’t forget to register and check out VeeamON virtually at https://www.veeam.com/veeamonWhat session are you most excited to see? Let’s share sessions in the comments 👇👇👇

Veeam storage functionsIs Veeam the most significant storage company that no one knows about? One of the essential features of any Veeam Backup and Replication architecture is the storage hardware that the backup target or backup repository will sit on.  The repository performance, features, and scalability are critical to ensuring that the Veeam deployment will meet customers' needs for quite a while.  Unfortunately, this is the component that many customers tend to make bad decisions, usually due to VARs and storage vendors trying to make the backup decisions for the customer.  This is easy for the partner and storage vendor community to do because, as we all know - we at Veeam pride ourselves on the fact that the Veeam Backup and Replication suite is a software-defined and hardware agnostic backup storage platform.  The partners, storage vendors, and even customers don't realize that Veeam also has another tag ling used internally - "Veeam is the largest storage company that no one

The Veeam Backup for AWS, Azure, and GCP products supplies an effortless way to protect workloads running in one of the hyperscale public clouds. Workload protection is done by taking native snapshots and copying snapshots to object storage for a defined period. A full instance recovery and file-level recoveries can be performed from the backup. But this only scratches the surface of what Veeam can do with a cloud-based backup.  To use advanced storage functions like Instant VM recovery directly to an on-premises hypervisor, full instance recovery into another hyperscale cloud, or copying backup files to an on-premises harden repository will require Veeam Backup and Replication to be integrated with Veeam Backup for AWS, Azure, and GCP through what’s called an “external repository”.  The Veeam Backup and Replication external repository is a read-only connection to the Veeam Backup for AWS, Azure, and GCP object-based storage repository. It allows Veeam Backup and Replication to perform

IntroductionObject storage vendors all have configuration considerations that must be accounted for as part of the process of designing Veeam backup repositories. Some of these considerations can be limiting, while others simply help dictate architecture decisions. In this post, I discuss on-premises vendor considerations, and how Veeam job settings can make an impact.To accommodate for vendor specific on-premises Object Storage Device limitations, it is sometimes necessary to adjust Veeam’s storage optimization settings. Every on-premises Object Storage vendor may express these limitations differently, but it usually boils down to the ability to handle large amounts of object metadata (and therefore number of objects) per bucket and/or device.In our experience, using larger storage optimization settings (job block size) with on-premises Object Storage devices typically works best. The bigger the storage optimization settings, the bigger the average object size which means less objects

Hi, I realised that nobody has ever mentioned the Veeam Custom Search tool on the community hub, and I wanted to make sure everyone knows that this tool exists. http://vee.am/VeeamCustomSearchFirstly, what is it?It’s a custom search engine powered by Google that focuses on delivering results from the various Veeam resources.The primary page of that link is deceptively simple, to the point you might think the page hasn’t loaded, you’ll just get a search bar that will present search predictions based on Veeam searches.Once you’ve searched is where the magic happens, you’ll see results from a variety of Veeam focused sites. Such as the R&D forums, the Helpcenter, whitepapers, KB articles, news room, blogs, videos, GitHub, and success stories.You can use this to filter down what type of content you’re after, and easily find what you’re looking for across the various sources of information that Veeam have available. Give it a try the next time you can’t find what you’re looking for, it

Just read the announcement of Anand Eswaran: Veeam Is Now The Tied #1 Data Replication & Protection Provider Worldwide! https://www.veeam.com/blog/number-one-data-replication-protection-provider-worldwide.html Veeam has reached the status of being tied as the #1 provider worldwide during 2H’21 in IDC’s data replication and protection market.Nice global data:#1 in EMEA #1 in LATAM #3 in APJA part for this great success is certainly also the strong community 

Evening, Wanted to share this interesting intersection of marketing & technology, the write-once SSD. Correct this isn’t April Fools… Verbatim have announced a write-once SSD. Theres a 10 year warranty against drive failure, it uses an exFAT file system and can be read by any OS supporting exFAT, but you require Win 10/11 and .Net 4.8 to install the proprietary software to write to the drive. Somewhat unsurprisingly, there are huge caveats listed, effectively it’s not tested to destruction against experienced hackers, but a handy way to prevent accidental file deletion. I wonder if we’ll start to see a market for this emerge…Interested in the full story? I read it on Tom’s Hardware here: https://www.tomshardware.com/news/verbatim-write-once-ssd

VMware will continue supporting USB/SD card as a boot device through the vSphere.Next product release, including the update releases. Refer to this KB for details.https://kb.vmware.com/s/article/85685