Community

I’m trying to backup Openshift Cluster through kasten but backup doesn’t happen and I’m confused what to do next. [&DeploymentCondition{Type:Available,Status:False,Reason:MinimumReplicasUnavailable,Message:Deployment does not have minimum availability.,LastUpdateTime:2022-07-03 08:28:50 +0000 UTC,LastTransitionTime:2022-07-03 08:28:50 +0000 UTC,} &DeploymentCondition{Type:Progressing,Status:False,Reason:ProgressDeadlineExceeded,Message:ReplicaSet "catalog-svc-5f994799b9" has timed out progressing.,LastUpdateTime:2022-07-03 21:05:58 +0000 UTC,LastTransitionTime:2022-07-03 21:05:58 +0000 UTC,}] 

Let's use some Thursday wisdom:"There are two kinds of skills, resources and tools:Ones that get used up as you use them.And ones that get better when you do.Nobody wants there to be a crowd at the ski area on a bluebird powder day–too many people use up the new snow.On the other hand, it’s no fun at all to go dancing when you’re the only one in the club.A painting or a song that’s experienced by more people is worth more. A carpenter increases her skills when she works on new projects (to a point). On the other hand, a sharp knife gets dull if you use it too often…If you’ve got something that benefits from use, from practice and community, use it and share it.'’ (Seth Godin)

Tried looking for this, but does a VM have to have a minimum version for CDP Replication?  Turning up CDP for the first time for two VM’s and getting the below error.  Or am I going about this wrong? 6/27/2022 4:58:31 PM :: VM configuration for the initial sync completed with errors Error: The virtual machine version is not compatible with the version of the host 'esxi02'. (The version of the IO Filter(s) 'VEE_bootbank_veecdp_11.1.94-1OEM.700.1.0.15843807' configured on the VM's disk are not compatible with the one installed on the destination host.): first occurrence at 6/27/2022 3:52:02 PM, last occurrence at 6/27/2022 4:59:02 PM, 91 retries  6/27/2022 5:01:17 PM :: Failed to configure source disks Error: The virtual machine version is not compatible with the version of the host 'esxi01'. (The version of the IO Filter(s) 'VEE_bootbank_veecdp_11.1.94-1OEM.700.1.0.15843807' configured on the VM's disk are not compatible with the one installed on the destination host.)    Source Host: 

Veeam ONE is an important part of Veeam Availability Suite. If you are new to Veeam, or currently running Veeam Availability Suite, you may not know that you have a powerful monitoring solution not only for your data protection environment but also your virtual environment. Veeam ONE provides visibility into your environment by monitoring and analyzing data trends that identify resource usage, helping plan for capacity, ensuring applications are performing efficiently and confirming backup operations are completing successfully. Veeam ONE does all of this, and if you are first getting started with Veeam ONE, this blog post is for you.Monitoring your environmentOnce you have added your environment into Veeam ONE, it immediately starts collecting data on how resources are being consumed, finds any problem areas and identifies bottlenecks. By switching through the different Veeam ONE Client views, you can monitor different environments, get more granular based on infrastructure components

Hey Veeam Community… if you are a Service Provider or a consumer of services from providers, I would like to get some quick feedback from you all. Short poll attached to this post is a quick yes/no… feel free to comment if you like.

Hey guys, can I use grafana to connect to veeam rest api ?

Where can I get the import string if I created a policy to export restore points each day and then need to restore any of these restore points in a different K8s cluster?

Hear the problem statement that led to the founding of ⁦@Minio from COO and Co-Founder ⁦@garimakap⁩ … Episode 48 looks at the state of Object Storage and how the data profile of what’s stored is shifting!

So our company is growing, and planning for the future we are moving our VEEAM to a new server, and of course decommission the old one. With this move we want to start fresh, but retain access to the old repository. Is there a certain process we can do, so that the old jobs will not be migrated to the new server, thus reducing clutter, and allow us to restore from the old repository?The reason for this is the backup job infrastructure was created, and adapted to a fast growing company so it was sort of a reactionary solution. We now have the storage and plan on moving to the cloud. This will hopefully allow us to move away from our aging tape drive a good bit.Thank you all for your help in this matter.

As many of you know I have written two books on Veeam and they have done well. Since going to VeeamON this year I am actually excited to write a third edition now. So based on what you have tested with the Beta what would you like to see covered?I am waiting for the what's new document so I can plan things out but if there a few topics of interest I will try to incorporate them. 😁

Hi guys,Which one is better for ensuring about our backup files health:Validating backup files by run Backup Validator as a script after backup job is done. Schedule Storage-Level Corruption Guard BRDavoud

Hey guys, this is query related to failover plan. Is failover plan dependent on replication job? When u select failover plan, u can select from replicas or infrastructure. From infrastructure option, can we select the VMs which are not replicated? 

Happy Friday from me to you all today! Today’s Fun Friday is a random one. I moved home this week and last night I was putting together my new office and thought to myself, I wonder if everyone else has as much random tech as me? So my question to you all is, what does your workspace/computer space look like?Hasn’t got to be pictures, but just little things like, how many screens? Any servers/lab tech?Favourite gadget in there such as a streamdeck or a ring light etc? For me, my favourite little gadget is my Crash Bandicoot “Cable Guy” that holds my Xbox controller!I’ve got 2x 28” screens and I’m really happy I finally have a long enough wall that both my screens can sit next to each other instead of at a near 90 degree angle! (It’s not good for the spine to twist that much in your chair constantly!) And because of this longer wall I no longer have my server lab under my feet so I can actually STRETCH!!!

Does anyone have experience with data recovery (VMware to Nutanix AHV) with Veeam?

We are beginning to put together a cloud based backup infrastructure, so we want to insure that we are leaving some bandwidth available for our employees, and not hobbling our internal backups. I have been doing some light research, and was wondering if there was a way to throttle only the backups that go up to the cloud, while leaving the on premise back up to disk jobs running at full.  I have seen how to setup the global rules, but they seem to apply to all jobs unless I am mistaken. Thank you in advance for any advise you can give me, or point me in the right direction.

Customer running v10 on 3 existing VBR servers and Enterprise Manager. EM has perpetual socket license.Replaced perpetual socket license on the EM server with new instance license.Opened up all three backup server consoles, and opened up the License dialog. All three showed perpetual licenses still.When Update or Install or Remove were clicked, the warning came up that the licensing was managed by an EM Server, did we want to continue? Cancelled this.Backup Service and Guest Catalog services were restarted: no change.Backup server was restarted: no change.Removed backup server from EM server; opened up license dialog on VBR, removed license so it is now Community Edition. Started Database collection. Closed and reopened dialog box on VBR, no change.Finally just put the new Instance license on the VBR. The other two servers are still showing perpetual, although successive database collections all showed successful connections to the backup servers.1. How should license updates behave wh

I am striking out on my Google-Fu and Forums-Fu ! I can't find a definitive result for what happens to backups when the source VMDK is resized (larger). Can anyone point me to the correct link for a customer to review? I think the backup job runs a new full because the block map changes. But for Replication, a rescan of the disk supposedly prevents resending the whole disk. 

Sorry for the repost but my last post doesn’t appear to exist anymore.Trying to install V11 onto a server 2012 R2 but just getting a red crossJMeixner “SQL set up ends with “Process returned exit code: 0x84B30002” Do you have a SQL server installation on this machine already? “There are some SQL installed but I believe this is from the first time I attempted to install VBR as they have the same install date and below is all the apps installed on the first date 

Hello Team,Greetings!The option mentioned in below link:https://helpcenter.veeam.com/docs/backup/vsphere/file_share_backup_job_secondary_target.html?ver=110 Is this only applicable for Veeam backed up VMs and we cannot use the secondary target for having a duplicate copy of replicated VMs correct?Thanks in advance!~ Ravi Kumar S

Hello, I’m trying to restore a full backup on a new ESXi host but it says Restore Point(s) is corrupted however the backup file is Full Backup Appreciate your support.

I didn’t see anywhere a discussion about this, so I say to myself: ok, let’s try.I tried a bare-metal recovery on a laptop I use for testing purposes, an HP 250 last gen laptop. On that I installed a Ubuntu 22.04 and then a copy of Veeam Agent (last version, of course).Did a backup (not encrypted) on USB drive and then I created a recovery-USB from a patched ISO linux ver with drivers.After that, I installed Windows 10 21H2 on that notebook, with drivers and Veeam Agent 5.0.3.This time I didn’t create a backup, but just a USB for bare-metal recovery.Lastly, I remove every partition on that laptop. What I wanted to test was the possibility of running a bare-metal recovery using a USB created from a different OS than backups.I expected process to go smoothly, but that’s not the case.What I got was this error.   Ok, two USB recovery media are different, but Veeam backup isn’t compatible between versions?(screens are for example, not taken from my test enviroiment) After that, I tried to o

Hi all, I have a backup that fails with the error Failed to call RPC function 'PluginsHost.StoreOnceReadFile'and RPC function call failed. Function name: [DoRpcWithBinary].I couldn't find anything that talks about that plugin or that function on the internet.Do you know more about this function and why this problem can happen?Thanks

I have a quick question regarding enabling backup file encryption. I would like to start using this option, but not clear on how it is being used once it is enabled.It appears that Veeam B&R continues to use the selected encryption password (in my case loss protection is disabled) during backups and restores.If someone were to gain access to the NAS that I am backing up to and attempted to restore a VM, they would need to have the password to restore the VM or guest files correct?If I do a test file level restore from an encrypted VM, I am not prompted to enter a password during the restore process.Thank you in advanceDon